[PATCH 2/4] media: platform: rzg2l-cru: rzg2l-ip: Add delay after D-PHY reset

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



As per section 35.3.1 Starting Reception for the MIPI CSI-2 Input on the
latest hardware manual(R01UH0914EJ0140 Rev.1.40) it is mentioned that
after DPHY reset, we need to wait for 1 msec or more before start
receiving data from the sensor. So add a delay after pre_streamon().

Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
---
 drivers/media/platform/renesas/rzg2l-cru/rzg2l-ip.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/media/platform/renesas/rzg2l-cru/rzg2l-ip.c b/drivers/media/platform/renesas/rzg2l-cru/rzg2l-ip.c
index 9f351a05893e..5468dc179de7 100644
--- a/drivers/media/platform/renesas/rzg2l-cru/rzg2l-ip.c
+++ b/drivers/media/platform/renesas/rzg2l-cru/rzg2l-ip.c
@@ -5,6 +5,7 @@
  * Copyright (C) 2022 Renesas Electronics Corp.
  */
 
+#include <linux/delay.h>
 #include "rzg2l-cru.h"
 
 struct rzg2l_cru_ip_format {
@@ -71,6 +72,8 @@ static int rzg2l_cru_ip_s_stream(struct v4l2_subdev *sd, int enable)
 		if (ret)
 			return ret;
 
+		usleep_range(1000, 2000);
+
 		ret = rzg2l_cru_start_image_processing(cru);
 		if (ret) {
 			v4l2_subdev_call(cru->ip.remote, video, post_streamoff);
-- 
2.25.1





[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux