[PATCH v2 3/4] staging: board: Remove Armadillo-800-EVA board staging code

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Since commits 1399ebacbf590dfb ("drm: renesas: shmobile: Add DT
support"), 138588e9fa237f97 ("ARM: dts: renesas: r8a7740: Add LCDC
nodes"), and c9a0ed13382660c9 ("ARM: dts: renesas: armadillo800eva: Add
LCD panel"), there is no longer any use for the Atmark Techno
Armadillo-800-EVA board staging code.

Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
v2:
  - New.
---
 drivers/staging/board/Makefile          |  1 -
 drivers/staging/board/armadillo800eva.c | 88 -------------------------
 2 files changed, 89 deletions(-)
 delete mode 100644 drivers/staging/board/armadillo800eva.c

diff --git a/drivers/staging/board/Makefile b/drivers/staging/board/Makefile
index 5db091b5ca01596a..b6a00c93c2cc10dd 100644
--- a/drivers/staging/board/Makefile
+++ b/drivers/staging/board/Makefile
@@ -1,3 +1,2 @@
 # SPDX-License-Identifier: GPL-2.0
 obj-y	:= board.o
-obj-$(CONFIG_ARCH_R8A7740)	+= armadillo800eva.o
diff --git a/drivers/staging/board/armadillo800eva.c b/drivers/staging/board/armadillo800eva.c
deleted file mode 100644
index 0225234dd7aa6b1c..0000000000000000
--- a/drivers/staging/board/armadillo800eva.c
+++ /dev/null
@@ -1,88 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Staging board support for Armadillo 800 eva.
- * Enable not-yet-DT-capable devices here.
- *
- * Based on board-armadillo800eva.c
- *
- * Copyright (C) 2012 Renesas Solutions Corp.
- * Copyright (C) 2012 Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
- */
-
-#include <linux/dma-mapping.h>
-#include <linux/fb.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/videodev2.h>
-
-#include <video/sh_mobile_lcdc.h>
-
-#include "board.h"
-
-static struct fb_videomode lcdc0_mode = {
-	.name		= "AMPIER/AM-800480",
-	.xres		= 800,
-	.yres		= 480,
-	.left_margin	= 88,
-	.right_margin	= 40,
-	.hsync_len	= 128,
-	.upper_margin	= 20,
-	.lower_margin	= 5,
-	.vsync_len	= 5,
-	.sync		= 0,
-};
-
-static struct sh_mobile_lcdc_info lcdc0_info = {
-	.clock_source	= LCDC_CLK_BUS,
-	.ch[0] = {
-		.chan		= LCDC_CHAN_MAINLCD,
-		.fourcc		= V4L2_PIX_FMT_RGB565,
-		.interface_type	= RGB24,
-		.clock_divider	= 5,
-		.flags		= 0,
-		.lcd_modes	= &lcdc0_mode,
-		.num_modes	= 1,
-		.panel_cfg = {
-			.width	= 111,
-			.height = 68,
-		},
-	},
-};
-
-static struct resource lcdc0_resources[] = {
-	DEFINE_RES_MEM_NAMED(0xfe940000, 0x4000, "LCD0"),
-	DEFINE_RES_IRQ(177 + 32),
-};
-
-static struct platform_device lcdc0_device = {
-	.name		= "sh_mobile_lcdc_fb",
-	.num_resources	= ARRAY_SIZE(lcdc0_resources),
-	.resource	= lcdc0_resources,
-	.id		= 0,
-	.dev	= {
-		.platform_data	= &lcdc0_info,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-};
-
-static const struct board_staging_clk lcdc0_clocks[] __initconst = {
-	{ "lcdc0", NULL, "sh_mobile_lcdc_fb.0" },
-};
-
-static const struct board_staging_dev armadillo800eva_devices[] __initconst = {
-	{
-		.pdev	 = &lcdc0_device,
-		.clocks	 = lcdc0_clocks,
-		.nclocks = ARRAY_SIZE(lcdc0_clocks),
-		.domain	 = "/system-controller@e6180000/pm-domains/c5/a4lc@1"
-	},
-};
-
-static void __init armadillo800eva_init(void)
-{
-	board_staging_gic_setup_xlate("arm,pl390", 32);
-	board_staging_register_devices(armadillo800eva_devices,
-				       ARRAY_SIZE(armadillo800eva_devices));
-}
-
-board_staging("renesas,armadillo800eva", armadillo800eva_init);
-- 
2.34.1





[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux