On Tue, Jan 16, 2024 at 4:16 PM Conor Dooley <conor@xxxxxxxxxx> wrote:
>
> On Tue, Jan 16, 2024 at 12:55:41PM -0800, Atish Patra wrote:
> > On Tue, Jan 9, 2024 at 11:40 PM Yu Chien Peter Lin
> > <peterlin@xxxxxxxxxxxxx> wrote:
> > >
> > > The custom PMU extension aims to support perf event sampling prior
> > > to the ratification of Sscofpmf. Instead of diverting the bits and
> > > register reserved for future standard, a set of custom registers is
> > > added. Hence, we may consider it as a CPU feature rather than an
> > > erratum.
> > >
> >
> > I don't think we should do that. Any custom implementation that
> > violates the standard RISC-V spec should
> > be an errata not a feature.
> > As per my understanding, a vendor can call an extension custom ISA
> > extension if the same feature is not available
> > in the standard ISA extensions or the mechanism is completely
> > different. It must also not violate any standard spec as well.
> >
> > In this case, a standard sscofpmf is already available. Moreover, both
> > Andes and T-head extensions violate the standard
> > spec by reusing local interrupt numbers (17(Thead) & 18(Andes)) which
> > are clearly specified as reserved for standard local interrupts
> > in the AIA specification.
>
> I disagree with you here. The Andes implementation predated (IIRC that
> is what was said in replies to an earlier revision) the Sscofpmf
> extension and certainly predates the AIA specification. I would be on
> board with this line of thinking if someone comes along in 2030 with
> "Zbb but with this one tweak" or where something flies entirely in the
> face of the standard (like the IOCP cache stuff). The relevant section
> in the AIA spec seems to say:
> | Interrupt causes that are standardized by the Privileged Architecture
> | have major identities in the range 0–15, while numbers 16 and higher are
> | officially available for platform standards or for custom use.
> | The Advanced Interrupt Architecture claims further authority over
> | identity numbers in the ranges 16–23 and 32–47, leaving numbers in the
> | range 24–31 and all major identities 48 and higher still free for custom
> | use.
> I don't see how that can be problematic given the Andes implemtation
> dates from before AIA was a thing. It would be silly to say that because
> an optional extension later came along and took over something previously
> allowed for indiscriminate custom use, that support for that custom
> extension is not permitted.
>
AIA is not some optional extension. It defines the RISC-V interrupt
architecture going forward and will be the default implementation
in the future. IMO, this will be a slippery slope if we start
supporting custom implementations to override interrupt ID definitions
via custom cpu features. T-head implementation works perfectly fine as
an errata and I don't understand why
there is a push to make it a cpu feature. We should try to improve the
ecosystem for future platforms rather than bending
backwards to support older implementations.
I understand the push to brand this as a custom extension if current
errata/alternative can't support it. But I don't think that's the case
here though. Please correct me if I am wrong.
> I may well be missing something here though, you clearly know these
> specs better than I do, but from what I have read I disagree.
>
> > Please implementation Andes PMU support as an errata as well similar to T-head
>
> I certainly _do not_ want to see things like this detected via lookup
> tables of marchid and co in the kernel unless it is absolutely required.
> We have standard probing mechanisms for feature detection (because to me
> this _is_ a feature) and they should be used. Additionally, we define what
> entries in the DT properties mean, and if it is convenient to put
> "psuedo" extensions into the DT, then we should do so. Getting away from
> being tied to what RVI decrees was one of the goals of the new
> properties after all, so that we could use a standard mechanism of DT
> probing for things like this.
>
Yes. That's a perfectly valid mechanism for actual custom/vendor ISA extensions.
I'm sure we'll have many of those, which will be leveraged via pseudo
extensions in the DT.
However, these shouldn't co-exist with standard ISA extensions in the
namespace in riscv_isa_ext and/or hwprobe.
The vendor-specific extensions should be defined under a
vendor-specific namespace.
This was another issue with this series as well. I didn't raise this
topic earlier because I don't think overriding interrupt
identities qualifies for a custom ISA extension
> Thanks,
> Conor.
>
> > > T-Head cores need to append "xtheadpmu" to the riscv,isa-extensions
> > > for each cpu node in device tree, and enable CONFIG_THEAD_CUSTOM_PMU
> > > for proper functioning as of this commit.
> > >
> > > Signed-off-by: Yu Chien Peter Lin <peterlin@xxxxxxxxxxxxx>
> > > Reviewed-by: Guo Ren <guoren@xxxxxxxxxx>
> > > Reviewed-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
> > > ---
> > > Changes v1 -> v2:
> > > - New patch
> > > Changes v2 -> v3:
> > > - Removed m{vendor/arch/imp}id checks in pmu_sbi_setup_irqs()
> > > Changes v3 -> v4:
> > > - No change
> > > Changes v4 -> v5:
> > > - Include Guo's Reviewed-by
> > > - Let THEAD_CUSTOM_PMU depend on ARCH_THEAD
> > > Changes v5 -> v6:
> > > - Include Conor's Reviewed-by
> > > Changes v6 -> v7:
> > > - No change
> > > ---
> > > arch/riscv/Kconfig.errata | 13 -------------
> > > arch/riscv/errata/thead/errata.c | 19 -------------------
> > > arch/riscv/include/asm/errata_list.h | 15 +--------------
> > > arch/riscv/include/asm/hwcap.h | 1 +
> > > arch/riscv/kernel/cpufeature.c | 1 +
> > > drivers/perf/Kconfig | 13 +++++++++++++
> > > drivers/perf/riscv_pmu_sbi.c | 19 ++++++++++++++-----
> > > 7 files changed, 30 insertions(+), 51 deletions(-)
> > >
> > > diff --git a/arch/riscv/Kconfig.errata b/arch/riscv/Kconfig.errata
> > > index e2c731cfed8c..0d19f47d1018 100644
> > > --- a/arch/riscv/Kconfig.errata
> > > +++ b/arch/riscv/Kconfig.errata
> > > @@ -86,17 +86,4 @@ config ERRATA_THEAD_CMO
> > >
> > > If you don't know what to do here, say "Y".
> > >
> > > -config ERRATA_THEAD_PMU
> > > - bool "Apply T-Head PMU errata"
> > > - depends on ERRATA_THEAD && RISCV_PMU_SBI
> > > - default y
> > > - help
> > > - The T-Head C9xx cores implement a PMU overflow extension very
> > > - similar to the core SSCOFPMF extension.
> > > -
> > > - This will apply the overflow errata to handle the non-standard
> > > - behaviour via the regular SBI PMU driver and interface.
> > > -
> > > - If you don't know what to do here, say "Y".
> > > -
> > > endmenu # "CPU errata selection"
> > > diff --git a/arch/riscv/errata/thead/errata.c b/arch/riscv/errata/thead/errata.c
> > > index 0554ed4bf087..5de5f7209132 100644
> > > --- a/arch/riscv/errata/thead/errata.c
> > > +++ b/arch/riscv/errata/thead/errata.c
> > > @@ -53,22 +53,6 @@ static bool errata_probe_cmo(unsigned int stage,
> > > return true;
> > > }
> > >
> > > -static bool errata_probe_pmu(unsigned int stage,
> > > - unsigned long arch_id, unsigned long impid)
> > > -{
> > > - if (!IS_ENABLED(CONFIG_ERRATA_THEAD_PMU))
> > > - return false;
> > > -
> > > - /* target-c9xx cores report arch_id and impid as 0 */
> > > - if (arch_id != 0 || impid != 0)
> > > - return false;
> > > -
> > > - if (stage == RISCV_ALTERNATIVES_EARLY_BOOT)
> > > - return false;
> > > -
> > > - return true;
> > > -}
> > > -
> > > static u32 thead_errata_probe(unsigned int stage,
> > > unsigned long archid, unsigned long impid)
> > > {
> > > @@ -80,9 +64,6 @@ static u32 thead_errata_probe(unsigned int stage,
> > > if (errata_probe_cmo(stage, archid, impid))
> > > cpu_req_errata |= BIT(ERRATA_THEAD_CMO);
> > >
> > > - if (errata_probe_pmu(stage, archid, impid))
> > > - cpu_req_errata |= BIT(ERRATA_THEAD_PMU);
> > > -
> > > return cpu_req_errata;
> > > }
> > >
> > > diff --git a/arch/riscv/include/asm/errata_list.h b/arch/riscv/include/asm/errata_list.h
> > > index 4ed21a62158c..9bccc2ba0eb5 100644
> > > --- a/arch/riscv/include/asm/errata_list.h
> > > +++ b/arch/riscv/include/asm/errata_list.h
> > > @@ -25,8 +25,7 @@
> > > #ifdef CONFIG_ERRATA_THEAD
> > > #define ERRATA_THEAD_PBMT 0
> > > #define ERRATA_THEAD_CMO 1
> > > -#define ERRATA_THEAD_PMU 2
> > > -#define ERRATA_THEAD_NUMBER 3
> > > +#define ERRATA_THEAD_NUMBER 2
> > > #endif
> > >
> > > #ifdef __ASSEMBLY__
> > > @@ -147,18 +146,6 @@ asm volatile(ALTERNATIVE_2( \
> > > "r"((unsigned long)(_start) + (_size)) \
> > > : "a0")
> > >
> > > -#define THEAD_C9XX_RV_IRQ_PMU 17
> > > -#define THEAD_C9XX_CSR_SCOUNTEROF 0x5c5
> > > -
> > > -#define ALT_SBI_PMU_OVERFLOW(__ovl) \
> > > -asm volatile(ALTERNATIVE( \
> > > - "csrr %0, " __stringify(CSR_SSCOUNTOVF), \
> > > - "csrr %0, " __stringify(THEAD_C9XX_CSR_SCOUNTEROF), \
> > > - THEAD_VENDOR_ID, ERRATA_THEAD_PMU, \
> > > - CONFIG_ERRATA_THEAD_PMU) \
> > > - : "=r" (__ovl) : \
> > > - : "memory")
> > > -
> > > #endif /* __ASSEMBLY__ */
> > >
> > > #endif
> > > diff --git a/arch/riscv/include/asm/hwcap.h b/arch/riscv/include/asm/hwcap.h
> > > index 5340f818746b..480f9da7fba7 100644
> > > --- a/arch/riscv/include/asm/hwcap.h
> > > +++ b/arch/riscv/include/asm/hwcap.h
> > > @@ -80,6 +80,7 @@
> > > #define RISCV_ISA_EXT_ZFA 71
> > > #define RISCV_ISA_EXT_ZTSO 72
> > > #define RISCV_ISA_EXT_ZACAS 73
> > > +#define RISCV_ISA_EXT_XTHEADPMU 74
> > >
> > > #define RISCV_ISA_EXT_MAX 128
> > > #define RISCV_ISA_EXT_INVALID U32_MAX
> > > diff --git a/arch/riscv/kernel/cpufeature.c b/arch/riscv/kernel/cpufeature.c
> > > index e32591e9da90..4aded5bf8fc3 100644
> > > --- a/arch/riscv/kernel/cpufeature.c
> > > +++ b/arch/riscv/kernel/cpufeature.c
> > > @@ -303,6 +303,7 @@ const struct riscv_isa_ext_data riscv_isa_ext[] = {
> > > __RISCV_ISA_EXT_DATA(svinval, RISCV_ISA_EXT_SVINVAL),
> > > __RISCV_ISA_EXT_DATA(svnapot, RISCV_ISA_EXT_SVNAPOT),
> > > __RISCV_ISA_EXT_DATA(svpbmt, RISCV_ISA_EXT_SVPBMT),
> > > + __RISCV_ISA_EXT_DATA(xtheadpmu, RISCV_ISA_EXT_XTHEADPMU),
> > > };
> > >
> > > const size_t riscv_isa_ext_count = ARRAY_SIZE(riscv_isa_ext);
> > > diff --git a/drivers/perf/Kconfig b/drivers/perf/Kconfig
> > > index 273d67ecf6d2..6cef15ec7c25 100644
> > > --- a/drivers/perf/Kconfig
> > > +++ b/drivers/perf/Kconfig
> > > @@ -86,6 +86,19 @@ config RISCV_PMU_SBI
> > > full perf feature support i.e. counter overflow, privilege mode
> > > filtering, counter configuration.
> > >
> > > +config THEAD_CUSTOM_PMU
> > > + bool "T-Head custom PMU support"
> > > + depends on ARCH_THEAD && RISCV_ALTERNATIVE && RISCV_PMU_SBI
> > > + default y
> > > + help
> > > + The T-Head C9xx cores implement a PMU overflow extension very
> > > + similar to the core SSCOFPMF extension.
> > > +
> > > + This will patch the overflow CSR and handle the non-standard
> > > + behaviour via the regular SBI PMU driver and interface.
> > > +
> > > + If you don't know what to do here, say "Y".
> > > +
> > > config ARM_PMU_ACPI
> > > depends on ARM_PMU && ACPI
> > > def_bool y
> > > diff --git a/drivers/perf/riscv_pmu_sbi.c b/drivers/perf/riscv_pmu_sbi.c
> > > index 2edbc37abadf..31ca79846399 100644
> > > --- a/drivers/perf/riscv_pmu_sbi.c
> > > +++ b/drivers/perf/riscv_pmu_sbi.c
> > > @@ -20,10 +20,21 @@
> > > #include <linux/cpu_pm.h>
> > > #include <linux/sched/clock.h>
> > >
> > > -#include <asm/errata_list.h>
> > > #include <asm/sbi.h>
> > > #include <asm/cpufeature.h>
> > >
> > > +#define THEAD_C9XX_RV_IRQ_PMU 17
> > > +#define THEAD_C9XX_CSR_SCOUNTEROF 0x5c5
> > > +
> > > +#define ALT_SBI_PMU_OVERFLOW(__ovl) \
> > > +asm volatile(ALTERNATIVE( \
> > > + "csrr %0, " __stringify(CSR_SSCOUNTOVF), \
> > > + "csrr %0, " __stringify(THEAD_C9XX_CSR_SCOUNTEROF), \
> > > + 0, RISCV_ISA_EXT_XTHEADPMU, \
> > > + CONFIG_THEAD_CUSTOM_PMU) \
> > > + : "=r" (__ovl) : \
> > > + : "memory")
> > > +
> > > #define SYSCTL_NO_USER_ACCESS 0
> > > #define SYSCTL_USER_ACCESS 1
> > > #define SYSCTL_LEGACY 2
> > > @@ -808,10 +819,8 @@ static int pmu_sbi_setup_irqs(struct riscv_pmu *pmu, struct platform_device *pde
> > > if (riscv_isa_extension_available(NULL, SSCOFPMF)) {
> > > riscv_pmu_irq_num = RV_IRQ_PMU;
> > > riscv_pmu_use_irq = true;
> > > - } else if (IS_ENABLED(CONFIG_ERRATA_THEAD_PMU) &&
> > > - riscv_cached_mvendorid(0) == THEAD_VENDOR_ID &&
> > > - riscv_cached_marchid(0) == 0 &&
> > > - riscv_cached_mimpid(0) == 0) {
> > > + } else if (riscv_isa_extension_available(NULL, XTHEADPMU) &&
> > > + IS_ENABLED(CONFIG_THEAD_CUSTOM_PMU)) {
> > > riscv_pmu_irq_num = THEAD_C9XX_RV_IRQ_PMU;
> > > riscv_pmu_use_irq = true;
> > > }
> > > --
> > > 2.34.1
> > >
> >
> >
> > --
> > Regards,
> > Atish
--
Regards,
Atish
