According to Table 8.1, "Summary of Module Power, Reset condition and
Clock assignment" of the R-Mobile APE6 Hardware Manual Rev. 0.7, the
parent clock of the thermal sensor clock is the Common Peripheral (CP)
clock, which runs at 13 MHz (main clock / 2).
As the R-Car Thermal driver does not use the clock rate, this change has
no functional impact.
Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
arch/arm/boot/dts/renesas/r8a73a4.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/renesas/r8a73a4.dtsi b/arch/arm/boot/dts/renesas/r8a73a4.dtsi
index 6847acaecc809eaa..b3d5c154cfc1b8c1 100644
--- a/arch/arm/boot/dts/renesas/r8a73a4.dtsi
+++ b/arch/arm/boot/dts/renesas/r8a73a4.dtsi
@@ -814,7 +814,7 @@ R8A73A4_CLK_IIC3
mstp5_clks: mstp5_clks@e6150144 {
compatible = "renesas,r8a73a4-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>;
- clocks = <&extal2_clk>, <&cpg_clocks R8A73A4_CLK_HP>;
+ clocks = <&cp_clk>, <&cpg_clocks R8A73A4_CLK_HP>;
#clock-cells = <1>;
clock-indices = <
R8A73A4_CLK_THERMAL R8A73A4_CLK_IIC8
--
2.34.1
