On Wed, Jan 10, 2024 at 7:11 AM Anup Patel <anup@xxxxxxxxxxxxxx> wrote: > > On Wed, Jan 10, 2024 at 1:10 PM Yu Chien Peter Lin > <peterlin@xxxxxxxxxxxxx> wrote: > > > > Currently, the implementation of the RISC-V INTC driver uses the > > interrupt cause as the hardware interrupt number, with a maximum of > > 64 interrupts. However, the platform can expand the interrupt number > > further for custom local interrupts. > > > > To fully utilize the available local interrupt sources, switch > > to using irq_domain_create_tree() that creates the radix tree > > map, add global variables (riscv_intc_nr_irqs, riscv_intc_custom_base > > and riscv_intc_custom_nr_irqs) to determine the valid range of local > > interrupt number (hwirq). > > > > Signed-off-by: Yu Chien Peter Lin <peterlin@xxxxxxxxxxxxx> > > Reviewed-by: Randolph <randolph@xxxxxxxxxxxxx> > > Looks good to me. > > Reviewed-by: Anup Patel <anup@xxxxxxxxxxxxxx> > > Regards, > Anup > > > --- > > Changes v1 -> v2: > > - Fixed irq mapping failure checking (suggested by Clément and Anup) > > Changes v2 -> v3: > > - No change > > Changes v3 -> v4: (Suggested by Thomas [1]) > > - Use pr_warn_ratelimited instead > > - Fix coding style and commit message > > Changes v4 -> v5: (Suggested by Thomas) > > - Fix commit message > > Changes v5 -> v6: (Suggested by Anup [2]) > > - Add riscv_intc_* global variables for checking range in riscv_intc_domain_alloc() > > - Advertise the number of interrupts allowed > > Changes v6 -> v7: > > - No functional change > > > > [1] https://patchwork.kernel.org/project/linux-riscv/patch/20231023004100.2663486-3-peterlin@xxxxxxxxxxxxx/#25573085 > > [2] https://patchwork.kernel.org/project/linux-riscv/patch/20231213070301.1684751-3-peterlin@xxxxxxxxxxxxx/#25636589 > > --- > > drivers/irqchip/irq-riscv-intc.c | 30 +++++++++++++++++++++++------- > > 1 file changed, 23 insertions(+), 7 deletions(-) > > > > diff --git a/drivers/irqchip/irq-riscv-intc.c b/drivers/irqchip/irq-riscv-intc.c > > index e8d01b14ccdd..b13a16b164c9 100644 > > --- a/drivers/irqchip/irq-riscv-intc.c > > +++ b/drivers/irqchip/irq-riscv-intc.c > > @@ -19,15 +19,17 @@ > > #include <linux/smp.h> > > > > static struct irq_domain *intc_domain; > > +static unsigned int riscv_intc_nr_irqs __ro_after_init; > > +static unsigned int riscv_intc_custom_base __ro_after_init; > > +static unsigned int riscv_intc_custom_nr_irqs __ro_after_init; > > > > static asmlinkage void riscv_intc_irq(struct pt_regs *regs) > > { > > unsigned long cause = regs->cause & ~CAUSE_IRQ_FLAG; > > > > - if (unlikely(cause >= BITS_PER_LONG)) > > - panic("unexpected interrupt cause"); > > - > > - generic_handle_domain_irq(intc_domain, cause); > > + if (generic_handle_domain_irq(intc_domain, cause)) > > + pr_warn_ratelimited("Failed to handle interrupt (cause: %ld)\n", > > + cause); > > } > > > > /* > > @@ -93,6 +95,14 @@ static int riscv_intc_domain_alloc(struct irq_domain *domain, > > if (ret) > > return ret; > > > > + /* > > + * Only allow hwirq for which we have corresponding standard or > > + * custom interrupt enable register. > > + */ > > + if ((riscv_intc_nr_irqs <= hwirq && hwirq < riscv_intc_custom_base) || > > + (riscv_intc_custom_base + riscv_intc_custom_nr_irqs) <= hwirq) > > + return -EINVAL; > > + > > for (i = 0; i < nr_irqs; i++) { > > ret = riscv_intc_domain_map(domain, virq + i, hwirq + i); > > if (ret) > > @@ -117,8 +127,7 @@ static int __init riscv_intc_init_common(struct fwnode_handle *fn) > > { > > int rc; > > > > - intc_domain = irq_domain_create_linear(fn, BITS_PER_LONG, > > - &riscv_intc_domain_ops, NULL); > > + intc_domain = irq_domain_create_tree(fn, &riscv_intc_domain_ops, NULL); > > if (!intc_domain) { > > pr_err("unable to add IRQ domain\n"); > > return -ENXIO; > > @@ -132,7 +141,10 @@ static int __init riscv_intc_init_common(struct fwnode_handle *fn) > > > > riscv_set_intc_hwnode_fn(riscv_intc_hwnode); > > > > - pr_info("%d local interrupts mapped\n", BITS_PER_LONG); > > + pr_info("%d local interrupts mapped\n", riscv_intc_nr_irqs); > > + if (riscv_intc_custom_nr_irqs) > > + pr_info("%d custom local interrupts mapped\n", > > + riscv_intc_custom_nr_irqs); > > > > return 0; > > } > > @@ -166,6 +178,10 @@ static int __init riscv_intc_init(struct device_node *node, > > return 0; > > } > > > > + riscv_intc_nr_irqs = BITS_PER_LONG; > > + riscv_intc_custom_base = riscv_intc_nr_irqs; > > + riscv_intc_custom_nr_irqs = 0; > > + > > return riscv_intc_init_common(of_node_to_fwnode(node)); > > } > > > > -- > > 2.34.1 > > Reviewed-by: Atish Patra <atishp@xxxxxxxxxxxx> -- Regards, Atish
