From: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
Hi,
This series adds suspend to RAM and runtime PM support for Ethernet
IP available on the RZ/G3S (R9A08G045) SoC.
As there are IP versions that switch to module standby when disabling
the clocks, and because of module standby IP switches to reset and
the register content is lost, to be able to have runtime PM supported
for all IP variants, the configuration operations were moved all to
ravb_open()/ravb_close() letting the ravb_probe() and ravb_remove()
to deal with resource parsing and allocation/free.
The ethtool and IOCTL APIs that could have been run asyncronously
were adapted to return if the interface is down. As explained in
each individual commits description, this should be harmless.
Along with it, the series contains preparatory cleanups.
The series has been tested on the boards with the following device trees:
- r8a7742-iwg21d-q7.dts
- r8a774a1-hihope-rzg2m-ex.dts
- r9a07g043u11-smarc-rzg2ul.dts
- r9a07g054l2-smarc-rzv2l.dts
- r9a07g044l2-smarc-rzg2l.dts
Thank you,
Claudiu Beznea
Changes in v3:
- collected tags
- addressed review comments
- squashed patch 17/21 ("net: ravb: Keep clock request operations grouped
together") from v2 in patch 07/19 ("net: ravb: Move reference clock
enable/disable on runtime PM APIs") from v3
- check for ndev->flags & IFF_UP in patch 17/19 and 18/19 instead of
checking netif_running()
- dropped patch 19/21 ("net: ravb: Do not set promiscuous mode if the
interface is down") as the changes there are not necessary as
ndev->flags & IFF_UP is already checked at the beginning of
__dev_set_rx_mode()
- remove code from ravb_open() introduced by patch 20/21
("net: ravb: Do not apply RX CSUM settings to hardware if the interface
is down") from v2 as this is not necessary; driver already takes
care of this in ravb_emac_init_rcar()
Changes in v2:
- rework the driver (mainly, ravb_open() contains now only resource
allocation and parsing leaving the settings to ravb_open(); ravb_remove()
has been adapted accordingly) to be able to use runtime PM for all
IP variants; due to this number of patches increased
- adjust previous series to review comments
- collected tags
- populated driver's own runtime PM ops with enable/disable of reference
clock
Claudiu Beznea (19):
net: ravb: Let IP-specific receive function to interrogate descriptors
net: ravb: Rely on PM domain to enable gptp_clk
net: ravb: Make reset controller support mandatory
net: ravb: Switch to SYSTEM_SLEEP_PM_OPS()/RUNTIME_PM_OPS() and
pm_ptr()
net: ravb: Use tabs instead of spaces
net: ravb: Assert/de-assert reset on suspend/resume
net: ravb: Move reference clock enable/disable on runtime PM APIs
net: ravb: Move the IRQs get and request in the probe function
net: ravb: Split GTI computation and set operations
net: ravb: Move delay mode set in the driver's ndo_open API
net: ravb: Move DBAT configuration to the driver's ndo_open API
net: ravb: Move PTP initialization in the driver's ndo_open API for
ccc_gac platorms
net: ravb: Set config mode in ndo_open and reset mode in ndo_close
net: ravb: Simplify ravb_suspend()
net: ravb: Simplify ravb_resume()
net: ravb: Keep the reverse order of operations in ravb_close()
net: ravb: Return cached statistics if the interface is down
net: ravb: Do not apply RX CSUM settings to hardware if the interface
is down
net: ravb: Add runtime PM support
drivers/net/ethernet/renesas/ravb.h | 6 +-
drivers/net/ethernet/renesas/ravb_main.c | 760 +++++++++++------------
2 files changed, 370 insertions(+), 396 deletions(-)
--
2.39.2
