From: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
RZ/G3S can go to deep sleep states where power to most of the SoC parts is
off. When resuming from such a state, the Ethernet controller needs to be
reinitialized. De-asserting the reset signal for it should also be done.
Thus, add reset assert/de-assert on suspend/resume functions.
On the resume function, the de-assert was not reverted in case of failures
to give the user a chance to restore the interface (e.g., bringing down/up
the interface) in case suspend/resume failed.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
---
Changes in v2:
- fixed typos in patch description and subject
- on ravb_suspend() assert the reset signal in case interface is down;
due to this the Sergey's Rb tag was left aside in this version
drivers/net/ethernet/renesas/ravb_main.c | 14 +++++++++++---
1 file changed, 11 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c
index 5a57383762e7..9a618d8dbfcd 100644
--- a/drivers/net/ethernet/renesas/ravb_main.c
+++ b/drivers/net/ethernet/renesas/ravb_main.c
@@ -2985,7 +2985,7 @@ static int ravb_suspend(struct device *dev)
int ret;
if (!netif_running(ndev))
- return 0;
+ goto reset_assert;
netif_device_detach(ndev);
@@ -2997,7 +2997,11 @@ static int ravb_suspend(struct device *dev)
if (priv->info->ccc_gac)
ravb_ptp_stop(ndev);
- return ret;
+ if (priv->wol_enabled)
+ return ret;
+
+reset_assert:
+ return reset_control_assert(priv->rstc);
}
static int ravb_resume(struct device *dev)
@@ -3005,7 +3009,11 @@ static int ravb_resume(struct device *dev)
struct net_device *ndev = dev_get_drvdata(dev);
struct ravb_private *priv = netdev_priv(ndev);
const struct ravb_hw_info *info = priv->info;
- int ret = 0;
+ int ret;
+
+ ret = reset_control_deassert(priv->rstc);
+ if (ret)
+ return ret;
/* If WoL is enabled set reset mode to rearm the WoL logic */
if (priv->wol_enabled) {
--
2.39.2
