[PATCH v2 3/3] rtc: da9063: Use dev_err_probe()

[Biju Das <biju.das.jz@xxxxxxxxxxxxxx>]

Replace dev_err()->dev_err_probe() to simpilfy probe().

Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
 drivers/rtc/rtc-da9063.c | 42 ++++++++++++++++------------------------
 1 file changed, 17 insertions(+), 25 deletions(-)

diff --git a/drivers/rtc/rtc-da9063.c b/drivers/rtc/rtc-da9063.c
index 6880467b2038..4847f0d838c5 100644
--- a/drivers/rtc/rtc-da9063.c
+++ b/drivers/rtc/rtc-da9063.c
@@ -407,57 +407,49 @@ static int da9063_rtc_probe(struct platform_device *pdev)
 				 config->rtc_enable_reg,
 				 config->rtc_enable_mask,
 				 config->rtc_enable_mask);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "Failed to enable RTC\n");
-		return ret;
-	}
+	if (ret < 0)
+		return dev_err_probe(&pdev->dev, ret, "Failed to enable RTC\n");
 
 	ret = regmap_update_bits(rtc->regmap,
 				 config->rtc_enable_32k_crystal_reg,
 				 config->rtc_crystal_mask,
 				 config->rtc_crystal_mask);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "Failed to run 32kHz oscillator\n");
-		return ret;
-	}
+	if (ret < 0)
+		return dev_err_probe(&pdev->dev, ret,
+				     "Failed to run 32kHz oscillator\n");
 
 	ret = regmap_update_bits(rtc->regmap,
 				 config->rtc_alarm_secs_reg,
 				 config->rtc_alarm_status_mask,
 				 0);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "Failed to access RTC alarm register\n");
-		return ret;
-	}
+	if (ret < 0)
+		return dev_err_probe(&pdev->dev, ret,
+				     "Failed to access RTC alarm register\n");
 
 	ret = regmap_update_bits(rtc->regmap,
 				 config->rtc_alarm_secs_reg,
 				 DA9063_ALARM_STATUS_ALARM,
 				 DA9063_ALARM_STATUS_ALARM);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "Failed to access RTC alarm register\n");
-		return ret;
-	}
+	if (ret < 0)
+		return dev_err_probe(&pdev->dev, ret,
+				     "Failed to access RTC alarm register\n");
 
 	ret = regmap_update_bits(rtc->regmap,
 				 config->rtc_alarm_year_reg,
 				 config->rtc_tick_on_mask,
 				 0);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "Failed to disable TICKs\n");
-		return ret;
-	}
+	if (ret < 0)
+		return dev_err_probe(&pdev->dev, ret,
+				     "Failed to disable TICKs\n");
 
 	data[RTC_SEC] = 0;
 	ret = regmap_bulk_read(rtc->regmap,
 			       config->rtc_alarm_secs_reg,
 			       &data[config->rtc_data_start],
 			       config->rtc_alarm_len);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "Failed to read initial alarm data: %d\n",
-			ret);
-		return ret;
-	}
+	if (ret < 0)
+		return dev_err_probe(&pdev->dev, ret,
+				     "Failed to read initial alarm data\n");
 
 	platform_set_drvdata(pdev, rtc);
 
-- 
2.25.1