From: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
There are 2 TITSR registers available on IA55 interrupt controller. A
single macro could be used to access both of them. Add a macro that
retrieves TITSR register offset based on it's index. This macro is
useful in commit that adds suspend/resume support to access both TITSR
registers in a for loop.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
---
drivers/irqchip/irq-renesas-rzg2l.c | 14 ++++++--------
1 file changed, 6 insertions(+), 8 deletions(-)
diff --git a/drivers/irqchip/irq-renesas-rzg2l.c b/drivers/irqchip/irq-renesas-rzg2l.c
index a77ac6e1606f..45b696db220f 100644
--- a/drivers/irqchip/irq-renesas-rzg2l.c
+++ b/drivers/irqchip/irq-renesas-rzg2l.c
@@ -28,8 +28,7 @@
#define ISCR 0x10
#define IITSR 0x14
#define TSCR 0x20
-#define TITSR0 0x24
-#define TITSR1 0x28
+#define TITSR(n) (0x24 + (n) * 4)
#define TITSR0_MAX_INT 16
#define TITSEL_WIDTH 0x2
#define TSSR(n) (0x30 + ((n) * 4))
@@ -200,8 +199,7 @@ static int rzg2l_tint_set_edge(struct irq_data *d, unsigned int type)
struct rzg2l_irqc_priv *priv = irq_data_to_priv(d);
unsigned int hwirq = irqd_to_hwirq(d);
u32 titseln = hwirq - IRQC_TINT_START;
- u32 offset;
- u8 sense;
+ u8 index, sense;
u32 reg;
switch (type & IRQ_TYPE_SENSE_MASK) {
@@ -217,17 +215,17 @@ static int rzg2l_tint_set_edge(struct irq_data *d, unsigned int type)
return -EINVAL;
}
- offset = TITSR0;
+ index = 0;
if (titseln >= TITSR0_MAX_INT) {
titseln -= TITSR0_MAX_INT;
- offset = TITSR1;
+ index = 1;
}
raw_spin_lock(&priv->lock);
- reg = readl_relaxed(priv->base + offset);
+ reg = readl_relaxed(priv->base + TITSR(index));
reg &= ~(IRQ_MASK << (titseln * TITSEL_WIDTH));
reg |= sense << (titseln * TITSEL_WIDTH);
- writel_relaxed(reg, priv->base + offset);
+ writel_relaxed(reg, priv->base + TITSR(index));
raw_spin_unlock(&priv->lock);
return 0;
--
2.39.2
