Hi Biju,
On Fri, Oct 6, 2023 at 2:18 PM Biju Das <biju.das.jz@xxxxxxxxxxxxxx> wrote:
> Configure GPIO interrupt as input mode. Also if the bootloader sets
> gpio interrupt pin as function, override it as gpio.
>
> Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
Thanks for your patch!
> --- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c
> +++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
> @@ -1580,6 +1580,26 @@ static const struct irq_chip rzg2l_gpio_irqchip = {
> GPIOCHIP_IRQ_RESOURCE_HELPERS,
> };
>
> +static int rzg2l_gpio_interrupt_input_mode(struct gpio_chip *chip, unsigned int offset)
> +{
> + struct rzg2l_pinctrl *pctrl = gpiochip_get_data(chip);
> + const struct pinctrl_pin_desc *pin_desc = &pctrl->desc.pins[offset];
> + u32 *pin_data = pin_desc->drv_data;
> + u32 off = RZG2L_PIN_CFG_TO_PORT_OFFSET(*pin_data);
> + u8 bit = RZG2L_PIN_ID_TO_PIN(offset);
> + u8 reg8;
> + int ret;
> +
> + reg8 = readb(pctrl->base + PMC(off));
> + if (reg8 & BIT(bit)) {
> + ret = rzg2l_gpio_request(chip, offset);
Who is taking care of calling pinctrl_gpio_free() when the interrupt
has been freed?
> + if (ret)
> + return ret;
> + }
> +
> + return rzg2l_gpio_direction_input(chip, offset);
> +}
> +
> static int rzg2l_gpio_child_to_parent_hwirq(struct gpio_chip *gc,
> unsigned int child,
> unsigned int child_type,
> @@ -1589,11 +1609,16 @@ static int rzg2l_gpio_child_to_parent_hwirq(struct gpio_chip *gc,
> struct rzg2l_pinctrl *pctrl = gpiochip_get_data(gc);
> unsigned long flags;
> int gpioint, irq;
> + int ret;
>
> gpioint = rzg2l_gpio_get_gpioint(child, pctrl->data);
> if (gpioint < 0)
> return gpioint;
>
> + ret = rzg2l_gpio_interrupt_input_mode(gc, child);
> + if (ret)
> + return ret;
> +
> spin_lock_irqsave(&pctrl->bitmap_lock, flags);
> irq = bitmap_find_free_region(pctrl->tint_slot, RZG2L_TINT_MAX_INTERRUPT, get_order(1));
> spin_unlock_irqrestore(&pctrl->bitmap_lock, flags);
TBH, it's not very clear to me how this is used...
I assume this is called as girq->child_to_parent_hwirq() from
gpiochip_hierarchy_irq_domain_alloc()?
Is that done from request_irq(), or at interrupt controller
initialization time?
Thanks!
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
