[PATCH net v2 2/2] ravb: Fix use-after-free issue in ravb_tx_timeout_work()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The ravb_stop() should call cancel_work_sync(). Otherwise,
ravb_tx_timeout_work() is possible to use the freed priv after
ravb_remove() was called like below:

CPU0			CPU1
			ravb_tx_timeout()
ravb_remove()
unregister_netdev()
free_netdev(ndev)
// free priv
			ravb_tx_timeout_work()
			// use priv

unregister_netdev() will call .ndo_stop() so that ravb_stop() is
called. And, after phy_stop() is called, netif_carrier_off()
is also called. So that .ndo_tx_timeout() will not be called
after phy_stop().

Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper")
Reported-by: Zheng Wang <zyytlz.wz@xxxxxxx>
Closes: https://lore.kernel.org/netdev/20230725030026.1664873-1-zyytlz.wz@xxxxxxx/
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
Reviewed-by: Sergey Shtylyov <s.shtylyov@xxxxxx>
---
 drivers/net/ethernet/renesas/ravb_main.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c
index 9e2e801049cc..0ef0b88b7145 100644
--- a/drivers/net/ethernet/renesas/ravb_main.c
+++ b/drivers/net/ethernet/renesas/ravb_main.c
@@ -2167,6 +2167,8 @@ static int ravb_close(struct net_device *ndev)
 			of_phy_deregister_fixed_link(np);
 	}
 
+	cancel_work_sync(&priv->work);
+
 	if (info->multi_irqs) {
 		free_irq(priv->tx_irqs[RAVB_NC], ndev);
 		free_irq(priv->rx_irqs[RAVB_NC], ndev);
-- 
2.25.1




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux