Re: [PATCH v22 12/16] PCI: add T_PVPERL macro

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Sep 25, 2023 at 04:21:26PM +0900, Yoshihiro Shimoda wrote:
> According to the PCI Express Card Electromechanical Specification,
> Power stable to PERST# inactive interval is 100 ms as minimum.
> So, add the macro to use PCIe controller drivers.
> 
> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>

Reviewed-by: Serge Semin <fancer.lancer@xxxxxxxxx>

-Serge(y)

> ---
>  drivers/pci/pci.h | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
> index 39a8932dc340..5ecbcf041179 100644
> --- a/drivers/pci/pci.h
> +++ b/drivers/pci/pci.h
> @@ -13,6 +13,9 @@
>  
>  #define PCIE_LINK_RETRAIN_TIMEOUT_MS	1000
>  
> +/* Power stable to PERST# inactive from PCIe card Electromechanical Spec */
> +#define PCIE_T_PVPERL_MS		100
> +
>  /*
>   * PCIe r6.0, sec 5.3.3.2.1 <PME Synchronization>
>   * Recommends 1ms to 10ms timeout to check L2 ready.
> -- 
> 2.25.1
> 



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux