On Sun, Aug 13, 2023 at 11:40:03AM -0500, Adam Ford wrote:
> There is a I2C controlled 100MHz Reference clock used by the PCIe
> controller. Configure this clock's DIF1 output to be used by
> the PCIe.
>
> Signed-off-by: Adam Ford <aford173@xxxxxxxxx>
> ---
> V2: Remove the pcie0_refclk clock that the new one replaces.
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts b/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts
> index acd265d8b58e..a8ccde678c33 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts
> @@ -23,6 +23,12 @@ chosen {
> stdout-path = &uart2;
> };
>
> + clk_xtal25: clk-xtal25 {
clock-xtal25 for the node name?
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <25000000>;
> + };
> +
> connector {
> compatible = "usb-c-connector";
> label = "USB-C";
> @@ -112,12 +118,6 @@ led-3 {
> };
> };
>
> - pcie0_refclk: clock-pcie {
> - compatible = "fixed-clock";
> - #clock-cells = <0>;
> - clock-frequency = <100000000>;
> - };
> -
> reg_audio: regulator-wm8962 {
> compatible = "regulator-fixed";
> regulator-name = "3v3_aud";
> @@ -246,6 +246,13 @@ pca6416_3: gpio@20 {
> interrupt-controller;
> #interrupt-cells = <2>;
> };
> +
> + pcieclk: clk@68 {
clock-generator in the bindings example seems a better node name to me.
Shawn
> + compatible = "renesas,9fgv0241";
> + reg = <0x68>;
> + clocks = <&clk_xtal25>;
> + #clock-cells = <1>;
> + };
> };
>
> &i2c3 {
> @@ -372,8 +379,9 @@ &pcie {
> };
>
> &pcie_phy {
> + fsl,clkreq-unsupported;
> fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
> - clocks = <&pcie0_refclk>;
> + clocks = <&pcieclk 1>;
> clock-names = "ref";
> status = "okay";
> };
> --
> 2.39.2
>
