Hi Biju,
On Mon, Sep 18, 2023 at 2:34 PM Biju Das <biju.das.jz@xxxxxxxxxxxxxx> wrote:
> As per RZ/G2L hardware manual Rev.1.30 section 8.7.3 GPIO Interrupt (TINT)
> and 41.4.1 Operation for GPIO function, we need to set digital noise
> filter for GPIO interrupt.
>
> This patch enables noise filter for GPIO interrupt in
> rzg2l_gpio_irq_enable() and disable it in rzg2l_gpio_irq_disable().
>
> Fixes: db2e5f21a48e ("pinctrl: renesas: pinctrl-rzg2l: Add IRQ domain to handle GPIO interrupt")
> Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
> Tested-by: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
Thanks for your patch!
> --- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c
> +++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
> @@ -96,6 +96,7 @@
> #define PIN(n) (0x0800 + 0x10 + (n))
> #define IOLH(n) (0x1000 + (n) * 8)
> #define IEN(n) (0x1800 + (n) * 8)
> +#define FILONOFF(n) (0x2080 + (n) * 8)
> #define ISEL(n) (0x2c80 + (n) * 8)
> #define PWPR (0x3014)
> #define SD_CH(n) (0x3000 + (n) * 4)
LGTM, but shouldn't you configure the Digital Noise Filter Number
(FILNUM) and Clock Selection (FILCLKSEL) registers, too?
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
