Re: [PATCH 22/37] clk: renesas: add minimal boot support for RZ/G3S SoC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Claudiu,

On Mon, Sep 18, 2023 at 8:20 AM claudiu beznea <claudiu.beznea@xxxxxxxxx> wrote:
> On 15.09.2023 15:52, Geert Uytterhoeven wrote:
> > On Tue, Sep 12, 2023 at 6:53 AM Claudiu <claudiu.beznea@xxxxxxxxx> wrote:
> >> From: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
> >>
> >> Add minimal clock and reset support for RZ/G3S SoC to be able to boot
> >> Linux from SD Card/eMMC. This includes necessary core clocks for booting
> >> and GIC, SCIF, GPIO, SD0 mod clocks and resets.
> >>
> >> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
> >
> > Thanks for your patch!
> >
> >> --- /dev/null
> >> +++ b/drivers/clk/renesas/r9a08g045-cpg.c
> >> @@ -0,0 +1,217 @@
> >> +// SPDX-License-Identifier: GPL-2.0
> >> +/*
> >> + * RZ/G3S CPG driver
> >> + *
> >> + * Copyright (C) 2023 Renesas Electronics Corp.
> >> + */
> >> +
> >> +#include <linux/clk-provider.h>
> >> +#include <linux/device.h>
> >> +#include <linux/init.h>
> >> +#include <linux/kernel.h>
> >> +
> >> +#include <dt-bindings/clock/r9a08g045-cpg.h>
> >> +
> >> +#include "rzg2l-cpg.h"
> >> +
> >> +/* RZ/G3S Specific registers. */
> >> +#define G3S_CPG_PL2_DDIV               (0x204)
> >> +#define G3S_CPG_SDHI_DDIV              (0x218)
> >> +#define G3S_CPG_PLL_DSEL               (0x240)
> >> +#define G3S_CPG_SDHI_DSEL              (0x244)
> >> +#define G3S_CLKSELSTATUS               (0x284)
> >> +
> >> +/* RZ/G3S Specific division configuration.  */
> >> +#define G3S_DIVPL2B            DDIV_PACK(G3S_CPG_PL2_DDIV, 4, 3)
> >> +#define G3S_DIV_SDHI0          DDIV_PACK(G3S_CPG_SDHI_DDIV, 0, 1)
> >> +
> >> +/* RZ/G3S Clock status configuration. */
> >> +#define G3S_DIVPL1A_STS                DDIV_PACK(CPG_CLKSTATUS, 0, 1)
> >> +#define G3S_DIVPL2B_STS                DDIV_PACK(CPG_CLKSTATUS, 5, 1)
> >> +#define G3S_DIVPL3A_STS                DDIV_PACK(CPG_CLKSTATUS, 8, 1)
> >> +#define G3S_DIVPL3B_STS                DDIV_PACK(CPG_CLKSTATUS, 9, 1)
> >> +#define G3S_DIVPL3C_STS                DDIV_PACK(CPG_CLKSTATUS, 10, 1)
> >> +#define G3S_DIV_SDHI0_STS      DDIV_PACK(CPG_CLKSTATUS, 24, 1)
> >
> > The register at offset 0x280 is called CPG_CLKDIVSTATUS, so
> > you probably want to add and use a G3S-specific definition.
>
> I just used the already definition as there is no conflict at the moment,
> it points to the same offset and is almost identical in name. With this
> would you still prefer to have it separately ?

I think that would be clearer for the casual reader.
On RZ/G2L, there is a single CPG_CLKSTATUS register to monitor frequency
dividers and selectors.
On RZ/G3S, this register was split into separate registers to monitor
frequency dividers (CPG_CLKDIVSTATUS) and selectors (CPG_CLKSELSTATUS).
You had to add a new definition for the latter anyway.

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux