Re: [PATCH v20 04/19] PCI: designware-ep: Add INTx IRQs support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Sep 14, 2023 at 07:56:21AM +0000, Yoshihiro Shimoda wrote:
> > From: Bjorn Helgaas, Sent: Thursday, September 14, 2023 8:31 AM
> > On Fri, Aug 25, 2023 at 06:32:04PM +0900, Yoshihiro Shimoda wrote:
> > > Add support for triggering INTx IRQs by using outbound iATU.
> > > Outbound iATU is utilized to send assert and de-assert INTA TLPs
> > > as simulated edge IRQ for INTA. (Other INT[BCD] are not asserted.)
> > > This INTx support is optional (if there is no memory for INTx,
> > > probe will not fail).
> > >
> > > The message is generated based on the payloadless Msg TLP with type
> > > 0x14, where 0x4 is the routing code implying the Terminate at
> > > Receiver message. The message code is specified as b1000xx for
> > > the INTx assertion and b1001xx for the INTx de-assertion.
> > >
> > > Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
> > > Reviewed-by: Serge Semin <fancer.lancer@xxxxxxxxx>
> > > ---
> > >  .../pci/controller/dwc/pcie-designware-ep.c   | 70 +++++++++++++++++--
> > >  drivers/pci/controller/dwc/pcie-designware.h  |  2 +
> > >  2 files changed, 68 insertions(+), 4 deletions(-)
> > >
> > > diff --git a/drivers/pci/controller/dwc/pcie-designware-ep.c b/drivers/pci/controller/dwc/pcie-designware-ep.c
> > > index 747d5bc07222..91e3c4335031 100644
> > > --- a/drivers/pci/controller/dwc/pcie-designware-ep.c
> > > +++ b/drivers/pci/controller/dwc/pcie-designware-ep.c
> > > @@ -6,9 +6,11 @@
> > >   * Author: Kishon Vijay Abraham I <kishon@xxxxxx>
> > >   */
> > >
> > > +#include <linux/delay.h>
> > >  #include <linux/of.h>
> > >  #include <linux/platform_device.h>
> > >
> > > +#include "../../pci.h"
> > >  #include "pcie-designware.h"
> > >  #include <linux/pci-epc.h>
> > >  #include <linux/pci-epf.h>
> > > @@ -484,14 +486,61 @@ static const struct pci_epc_ops epc_ops = {
> > >  	.get_features		= dw_pcie_ep_get_features,
> > >  };
> > >
> > > +static int dw_pcie_ep_send_msg(struct dw_pcie_ep *ep, u8 func_no, u8 code,
> > > +			       u8 routing)
> > > +{
> > > +	struct dw_pcie_ob_atu_cfg atu = { 0 };
> > > +	struct pci_epc *epc = ep->epc;
> > > +	int ret;
> > > +
> > > +	atu.func_no = func_no;
> > > +	atu.code = code;
> > > +	atu.routing = routing;
> > > +	atu.type = PCIE_ATU_TYPE_MSG;
> > > +	atu.cpu_addr = ep->intx_mem_phys;
> > > +	atu.size = epc->mem->window.page_size;
> > > +
> > > +	ret = dw_pcie_ep_outbound_atu(ep, &atu);
> > > +	if (ret)
> > > +		return ret;
> > > +
> > > +	/* A dummy-write ep->intx_mem is converted to a Msg TLP */
> > > +	writel(0, ep->intx_mem);
> > > +
> > > +	dw_pcie_ep_unmap_addr(epc, func_no, 0, ep->intx_mem_phys);
> > > +
> > > +	return 0;
> > > +}
> > > +
> > >  int dw_pcie_ep_raise_legacy_irq(struct dw_pcie_ep *ep, u8 func_no)
> > >  {
> > >  	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> > >  	struct device *dev = pci->dev;
> > > +	int ret;
> > >
> > > -	dev_err(dev, "EP cannot trigger legacy IRQs\n");
> > > +	if (!ep->intx_mem) {
> > > +		dev_err(dev, "legacy IRQs not supported\n");
> > > +		return -EOPNOTSUPP;
> > > +	}
> > >
> > > -	return -EINVAL;
> > > +	/*
> > > +	 * Even though the PCI bus specification implies the level-triggered
> > > +	 * INTx interrupts the kernel PCIe endpoint framework has a single
> > > +	 * PCI_EPC_IRQ_INTx flag defined for the legacy IRQs simulation. Thus
> > > +	 * this function sends the Deassert_INTx PCIe TLP after the Assert_INTx
> > > +	 * message with the 50 usec duration basically implementing the
> > > +	 * rising-edge triggering IRQ. Hopefully the interrupt controller will
> > > +	 * still be able to register the incoming IRQ event...
> > 
> > I'm not really convinced about this "assert INTA, wait 50us, deassert
> > INTA" thing.  All the INTx language in the spec is like this:
> > 
> >   ... the virtual INTx wire must be asserted whenever and *as long as*
> >   the following conditions are satisfied:
> > 
> >     - The Interrupt Disable bit in the Command register is set to 0b.
> > 
> >     - The <feature> Interrupt Enable bit in the <feature> Control
> >       Register is set to 1b.
> > 
> >     - The <feature> Status bit in the <feature> Status register is
> >       set.
> > 
> > E.g., sec PCIe r6.0, sec 5.5.6 (Link Activation), 6.1.6 (Native PME),
> > 6.2.4.1.2 (AER Interrupt Generation), 6.2.11.1 (DPC Interrupts),
> > 6.7.3.4 (Software Notification of Hot-Plug Events).
> > 
> > So it seems to me like the endpoint needs an "interrupt status" bit,
> > and the Deassert_INTx message would be sent when the host interrupt
> > handler clears that bit.
> 
> Thank you very much for your comments! About this topic, 
> Frank also has a similar opinion before [1]. So, I asked Kishon
> about this, but I didn't get any comment from Kishon at that time.
> Anyway, to handle INTx on PCIe endpoint framework properly,
> we need to modify the PCIe Endpoint framework, IIUC.
> 
> Should I modify the PCIe Endpoint framework at first?
> Or, can this patch be applied as-is? 
> I guess that such modification of the PCIe Endpoint framework
> need much time. So, if I should modify the framework at first,
> I would like to drop adding INTx support [2] from my patch series
> because supporting INTx on my PCIe controller is not mandatory.
> 
> [1]
> https://lore.kernel.org/linux-pci/TYBPR01MB5341EFAC471AEBB9100D6051D8719@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx/
> 
> [2]
> The following patches are not needed if INTx support should be dropped:
> 
> eb185e1e628a PCI: designware-ep: Add INTx IRQs support
> 5d0e51f85b23 PCI: dwc: Add outbound MSG TLPs support
> 4758bef61cc2 PCI: dwc: Change arguments of dw_pcie_prog_outbound_atu()
> 44938b13046b PCI: Add INTx Mechanism Messages macros

Since INTx support isn't mandatory at this time, I think we should
drop these patches for now.  If/when somebody definitely needs INTx
support, we can resurrect them, and then we'll have more clarity on
how it should work and we'll be better able to test it.

Bjorn



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux