[PATCH 08/37] clk: renesas: rzg2l: trust value returned by hardware

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>

Initial value of CPG_PL2SDHI_DSEL bits 0..1 or 4..6 is 01b. Hardware user's
manual (r01uh0914ej0130-rzg2l-rzg2lc.pdf) specifies that setting 0 is
prohibited. The rzg2l_cpg_sd_clk_mux_get_parent() should just read
CPG_PL2SDHI_DSEL, trust the value and return the proper clock parent index
based on the read value. Do this.

Fixes: eaff33646f4cb ("clk: renesas: rzg2l: Add SDHI clk mux support")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
---
 drivers/clk/renesas/rzg2l-cpg.c | 8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)

diff --git a/drivers/clk/renesas/rzg2l-cpg.c b/drivers/clk/renesas/rzg2l-cpg.c
index 1195d4b1f545..d0d086d6dc51 100644
--- a/drivers/clk/renesas/rzg2l-cpg.c
+++ b/drivers/clk/renesas/rzg2l-cpg.c
@@ -239,14 +239,8 @@ static u8 rzg2l_cpg_sd_clk_mux_get_parent(struct clk_hw *hw)
 
 	val >>= GET_SHIFT(hwdata->conf);
 	val &= GENMASK(GET_WIDTH(hwdata->conf) - 1, 0);
-	if (val) {
-		val--;
-	} else {
-		/* Prohibited clk source, change it to 533 MHz(reset value) */
-		rzg2l_cpg_sd_clk_mux_set_parent(hw, 0);
-	}
 
-	return val;
+	return val ? --val : val;
 }
 
 static const struct clk_ops rzg2l_cpg_sd_clk_mux_ops = {
-- 
2.39.2




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux