This fixes the following W=1 warning during build: > drivers/clk/renesas/r9a06g032-clocks.c:119: warning: Function parameter or member 'dual' not described in 'r9a06g032_clkdesc' Added documentation for member 'dual'. Also added names for the other structures in the same union, with documentation. Adjusted names of members within the 'div' structure to avoid duplication. Reported-by: kernel test robot <lkp@xxxxxxxxx> Closes: https://lore.kernel.org/oe-kbuild-all/202309101314.kTRoxND5-lkp@xxxxxxxxx/ Signed-off-by: Ralph Siemsen <ralph.siemsen@xxxxxxxxxx> --- Second post, as the Subject: line accidentally got messed up previously. drivers/clk/renesas/r9a06g032-clocks.c | 64 ++++++++++++++------------ 1 file changed, 34 insertions(+), 30 deletions(-) diff --git a/drivers/clk/renesas/r9a06g032-clocks.c b/drivers/clk/renesas/r9a06g032-clocks.c index 55db63c7041a..61296c81f9b5 100644 --- a/drivers/clk/renesas/r9a06g032-clocks.c +++ b/drivers/clk/renesas/r9a06g032-clocks.c @@ -102,19 +102,22 @@ enum gate_type { * @source: the ID+1 of the parent clock element. * Root clock uses ID of ~0 (PARENT_ID); * @gate: clock enable/disable - * @div_min: smallest permitted clock divider - * @div_max: largest permitted clock divider - * @reg: clock divider register offset, in 32-bit words - * @div_table: optional list of fixed clock divider values; + * @div: substructure for clock divider + * @div.min: smallest permitted clock divider + * @div.max: largest permitted clock divider + * @div.reg: clock divider register offset, in 32-bit words + * @div.table: optional list of fixed clock divider values; * must be in ascending order, zero for unused - * @div: divisor for fixed-factor clock - * @mul: multiplier for fixed-factor clock - * @group: UART group, 0=UART0/1/2, 1=UART3/4/5/6/7 - * @sel: select either g1/r1 or g2/r2 as clock source - * @g1: 1st source gate (clock enable/disable) - * @r1: 1st source reset (module reset) - * @g2: 2nd source gate (clock enable/disable) - * @r2: 2nd source reset (module reset) + * @ffc: substructure for fixed-factor clocks + * @ffc.div: divisor for fixed-factor clock + * @ffc.mul: multiplier for fixed-factor clock + * @dual: substructure for dual clock gates + * @dual.group: UART group, 0=UART0/1/2, 1=UART3/4/5/6/7 + * @dual.sel: select either g1/r1 or g2/r2 as clock source + * @dual.g1: 1st source gate (clock enable/disable) + * @dual.r1: 1st source reset (module reset) + * @dual.g2: 2nd source gate (clock enable/disable) + * @dual.r2: 2nd source reset (module reset) * * Describes a single element in the clock tree hierarchy. * As there are quite a large number of clock elements, this @@ -131,13 +134,13 @@ struct r9a06g032_clkdesc { struct r9a06g032_gate gate; /* type = K_DIV */ struct { - unsigned int div_min:10, div_max:10, reg:10; - u16 div_table[4]; - }; + unsigned int min:10, max:10, reg:10; + u16 table[4]; + } div; /* type = K_FFC */ struct { u16 div, mul; - }; + } ffc; /* type = K_DUALGATE */ struct { uint16_t group:1; @@ -178,26 +181,26 @@ struct r9a06g032_clkdesc { .type = K_FFC, \ .index = R9A06G032_##_idx, \ .name = _n, \ - .div = _div, \ - .mul = _mul \ + .ffc.div = _div, \ + .ffc.mul = _mul \ } #define D_FFC(_idx, _n, _src, _div) { \ .type = K_FFC, \ .index = R9A06G032_##_idx, \ .source = 1 + R9A06G032_##_src, \ .name = _n, \ - .div = _div, \ - .mul = 1 \ + .ffc.div = _div, \ + .ffc.mul = 1 \ } #define D_DIV(_idx, _n, _src, _reg, _min, _max, ...) { \ .type = K_DIV, \ .index = R9A06G032_##_idx, \ .source = 1 + R9A06G032_##_src, \ .name = _n, \ - .reg = _reg, \ - .div_min = _min, \ - .div_max = _max, \ - .div_table = { __VA_ARGS__ } \ + .div.reg = _reg, \ + .div.min = _min, \ + .div.max = _max, \ + .div.table = { __VA_ARGS__ } \ } #define D_UGATE(_idx, _n, _src, _g, _g1, _r1, _g2, _r2) { \ .type = K_DUALGATE, \ @@ -1063,14 +1066,14 @@ r9a06g032_register_div(struct r9a06g032_priv *clocks, div->clocks = clocks; div->index = desc->index; - div->reg = desc->reg; + div->reg = desc->div.reg; div->hw.init = &init; - div->min = desc->div_min; - div->max = desc->div_max; + div->min = desc->div.min; + div->max = desc->div.max; /* populate (optional) divider table fixed values */ for (i = 0; i < ARRAY_SIZE(div->table) && - i < ARRAY_SIZE(desc->div_table) && desc->div_table[i]; i++) { - div->table[div->table_size++] = desc->div_table[i]; + i < ARRAY_SIZE(desc->div.table) && desc->div.table[i]; i++) { + div->table[div->table_size++] = desc->div.table[i]; } clk = clk_register(NULL, &div->hw); @@ -1333,7 +1336,8 @@ static int __init r9a06g032_clocks_probe(struct platform_device *pdev) case K_FFC: clk = clk_register_fixed_factor(NULL, d->name, parent_name, 0, - d->mul, d->div); + d->ffc.mul, + d->ffc.div); break; case K_GATE: clk = r9a06g032_register_gate(clocks, parent_name, d); -- 2.25.1
