Re: [PATCH 3/3] i2c: rcar: add FastMode+ support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Andi,

> > @@ -217,7 +228,17 @@ static void rcar_i2c_init(struct rcar_i2c_priv *priv)
> >  	rcar_i2c_write(priv, ICMCR, MDBS);
> >  	rcar_i2c_write(priv, ICMSR, 0);
> >  	/* start clock */
> > -	rcar_i2c_write(priv, ICCCR, priv->icccr);
> > +	if (priv->flags & ID_P_FMPLUS) {
> > +		rcar_i2c_write(priv, ICCCR, 0);
> > +		rcar_i2c_write(priv, ICMPR, priv->clock_val);
> > +		rcar_i2c_write(priv, ICHPR, 3 * priv->clock_val);
> > +		rcar_i2c_write(priv, ICLPR, 3 * priv->clock_val);
> > +		rcar_i2c_write(priv, ICCCR2, FMPE | CDFD | HLSE | SME);
> > +	} else {
> > +		rcar_i2c_write(priv, ICCCR, priv->clock_val);
> > +		if (priv->devtype >= I2C_RCAR_GEN3)
> > +			rcar_i2c_write(priv, ICCCR2, 0);
> 
> is this last bit part of the FM+ enabling or is it part of the
> GEN4 support?

It is "disabling FM+" for lower speeds. Since we never used ICCCR2
before FM+, we need to make sure it is cleared properly.

> > +		for (scgd = 0; scgd < 0x40; scgd++) {
> > +			scl = ick / (20 + (scgd * 8) + round);
> > +			if (scl <= t.bus_freq_hz)
> > +				break;
> > +		}
> > +
> > +		if (scgd == 0x40) {
> 
> would be nice to give a meaning to this 0x40 constant... either
> having it in a define or a comment, at least.

This code existed before and was just moved into an if-body. It will be
updated in another series following this one.

Thanks for the review,

   Wolfram

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux