[PATCH v19 01/19] PCI: Add INTx Mechanism Messages macros

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add "Message Routing" and "INTx Mechanism Messages" macros to enable
a PCIe driver to send messages for INTx Interrupt Signaling.

The "Message Routing" is from Table 2-17, and the "INTx Mechanism
Messages" is from Table 2-18 on the PCI Express Base Specification,
Rev. 4.0 Version 1.0.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
Reviewed-by: Serge Semin <fancer.lancer@xxxxxxxxx>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
---
 drivers/pci/pci.h | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index a4c397434057..0b6df6c2c918 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -13,6 +13,24 @@
 
 #define PCIE_LINK_RETRAIN_TIMEOUT_MS	1000
 
+/* Message Routing (r[2:0]) */
+#define PCI_MSG_TYPE_R_ROUTING_RC	0
+#define PCI_MSG_TYPE_R_ROUTING_ADDR	1
+#define PCI_MSG_TYPE_R_ROUTING_ID	2
+#define PCI_MSG_TYPE_R_ROUTING_BC	3
+#define PCI_MSG_TYPE_R_ROUTING_LOCAL	4
+#define PCI_MSG_TYPE_R_ROUTING_GATHER	5
+
+/* INTx Mechanism Messages */
+#define PCI_MSG_CODE_ASSERT_INTA	0x20
+#define PCI_MSG_CODE_ASSERT_INTB	0x21
+#define PCI_MSG_CODE_ASSERT_INTC	0x22
+#define PCI_MSG_CODE_ASSERT_INTD	0x23
+#define PCI_MSG_CODE_DEASSERT_INTA	0x24
+#define PCI_MSG_CODE_DEASSERT_INTB	0x25
+#define PCI_MSG_CODE_DEASSERT_INTC	0x26
+#define PCI_MSG_CODE_DEASSERT_INTD	0x27
+
 extern const unsigned char pcie_link_speed[];
 extern bool pci_early_dump;
 
-- 
2.25.1




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux