The pinctrl group and function creation/remove calls expect caller to take care of locking. Add lock around these functions. Fixes: b59d0e782706 ("pinctrl: Add RZ/A2 pin and gpio controller") Cc: stable@xxxxxxxxxx Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx> --- drivers/pinctrl/renesas/pinctrl-rza2.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/pinctrl/renesas/pinctrl-rza2.c b/drivers/pinctrl/renesas/pinctrl-rza2.c index 0b454a31c4bd..afb595a6eb9e 100644 --- a/drivers/pinctrl/renesas/pinctrl-rza2.c +++ b/drivers/pinctrl/renesas/pinctrl-rza2.c @@ -14,6 +14,7 @@ #include <linux/gpio/driver.h> #include <linux/io.h> #include <linux/module.h> +#include <linux/mutex.h> #include <linux/of.h> #include <linux/pinctrl/pinmux.h> #include <linux/platform_device.h> @@ -47,6 +48,7 @@ struct rza2_pinctrl_priv { struct pinctrl_dev *pctl; struct pinctrl_gpio_range gpio_range; int npins; + struct mutex mutex; /* serialize adding groups and functions */ }; #define RZA2_PDR(port) (0x0000 + (port) * 2) /* Direction 16-bit */ @@ -359,10 +361,13 @@ static int rza2_dt_node_to_map(struct pinctrl_dev *pctldev, psel_val[i] = MUX_FUNC(value); } + mutex_lock(&priv->mutex); /* Register a single pin group listing all the pins we read from DT */ gsel = pinctrl_generic_add_group(pctldev, np->name, pins, npins, NULL); - if (gsel < 0) + if (gsel < 0) { + mutex_unlock(&priv->mutex); return gsel; + } /* * Register a single group function where the 'data' is an array PSEL @@ -390,6 +395,7 @@ static int rza2_dt_node_to_map(struct pinctrl_dev *pctldev, (*map)->data.mux.group = np->name; (*map)->data.mux.function = np->name; *num_maps = 1; + mutex_unlock(&priv->mutex); return 0; @@ -398,6 +404,7 @@ static int rza2_dt_node_to_map(struct pinctrl_dev *pctldev, remove_group: pinctrl_generic_remove_group(pctldev, gsel); + mutex_unlock(&priv->mutex); dev_err(priv->dev, "Unable to parse DT node %s\n", np->name); @@ -474,6 +481,8 @@ static int rza2_pinctrl_probe(struct platform_device *pdev) if (IS_ERR(priv->base)) return PTR_ERR(priv->base); + mutex_init(&priv->mutex); + platform_set_drvdata(pdev, priv); priv->npins = (int)(uintptr_t)of_device_get_match_data(&pdev->dev) * -- 2.25.1