[PATCH 2/3] clk: vc3: Fix output clock mapping

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



According to Table 3. ("Output Source") in the 5P35023 datasheet,
the output clock mapping should be 0=REF, 1=SE1, 2=SE2, 3=SE3,
4=DIFF1, 5=DIFF2. But the code uses inverse. Fix this mapping issue.

Suggested-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
Closes: https://lore.kernel.org/all/CAMuHMdUHD+bEco=WYTYWsTAyRt3dTQQt4Xpaejss0Y2ZpLCMNg@xxxxxxxxxxxxxx/
Fixes: 6e9aff555db7 ("clk: Add support for versa3 clock driver")
Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
---
 drivers/clk/clk-versaclock3.c | 68 +++++++++++++++++------------------
 1 file changed, 34 insertions(+), 34 deletions(-)

diff --git a/drivers/clk/clk-versaclock3.c b/drivers/clk/clk-versaclock3.c
index 7ca413a5b1fb..80f9f13f0e70 100644
--- a/drivers/clk/clk-versaclock3.c
+++ b/drivers/clk/clk-versaclock3.c
@@ -119,20 +119,20 @@ enum vc3_div {
 };
 
 enum vc3_clk_mux {
-	VC3_DIFF2_MUX,
-	VC3_DIFF1_MUX,
-	VC3_SE3_MUX,
-	VC3_SE2_MUX,
 	VC3_SE1_MUX,
+	VC3_SE2_MUX,
+	VC3_SE3_MUX,
+	VC3_DIFF1_MUX,
+	VC3_DIFF2_MUX,
 };
 
 enum vc3_clk {
-	VC3_DIFF2,
-	VC3_DIFF1,
-	VC3_SE3,
-	VC3_SE2,
-	VC3_SE1,
 	VC3_REF,
+	VC3_SE1,
+	VC3_SE2,
+	VC3_SE3,
+	VC3_DIFF1,
+	VC3_DIFF2,
 };
 
 struct vc3_clk_data {
@@ -896,33 +896,33 @@ static struct vc3_hw_data clk_div[] = {
 };
 
 static struct vc3_hw_data clk_mux[] = {
-	[VC3_DIFF2_MUX] = {
+	[VC3_SE1_MUX] = {
 		.data = &(struct vc3_clk_data) {
-			.offs = VC3_DIFF2_CTRL_REG,
-			.bitmsk = VC3_DIFF2_CTRL_REG_DIFF2_CLK_SEL
+			.offs = VC3_SE1_DIV4_CTRL,
+			.bitmsk = VC3_SE1_DIV4_CTRL_SE1_CLK_SEL
 		},
 		.hw.init = &(struct clk_init_data){
-			.name = "diff2_mux",
+			.name = "se1_mux",
 			.ops = &vc3_clk_mux_ops,
 			.parent_hws = (const struct clk_hw *[]) {
-				&clk_div[VC3_DIV1].hw,
-				&clk_div[VC3_DIV3].hw
+				&clk_div[VC3_DIV5].hw,
+				&clk_div[VC3_DIV4].hw
 			},
 			.num_parents = 2,
 			.flags = CLK_SET_RATE_PARENT
 		}
 	},
-	[VC3_DIFF1_MUX] = {
+	[VC3_SE2_MUX] = {
 		.data = &(struct vc3_clk_data) {
-			.offs = VC3_DIFF1_CTRL_REG,
-			.bitmsk = VC3_DIFF1_CTRL_REG_DIFF1_CLK_SEL
+			.offs = VC3_SE2_CTRL_REG0,
+			.bitmsk = VC3_SE2_CTRL_REG0_SE2_CLK_SEL
 		},
 		.hw.init = &(struct clk_init_data){
-			.name = "diff1_mux",
+			.name = "se2_mux",
 			.ops = &vc3_clk_mux_ops,
 			.parent_hws = (const struct clk_hw *[]) {
-				&clk_div[VC3_DIV1].hw,
-				&clk_div[VC3_DIV3].hw
+				&clk_div[VC3_DIV5].hw,
+				&clk_div[VC3_DIV4].hw
 			},
 			.num_parents = 2,
 			.flags = CLK_SET_RATE_PARENT
@@ -944,33 +944,33 @@ static struct vc3_hw_data clk_mux[] = {
 			.flags = CLK_SET_RATE_PARENT
 		}
 	},
-	[VC3_SE2_MUX] = {
+	[VC3_DIFF1_MUX] = {
 		.data = &(struct vc3_clk_data) {
-			.offs = VC3_SE2_CTRL_REG0,
-			.bitmsk = VC3_SE2_CTRL_REG0_SE2_CLK_SEL
+			.offs = VC3_DIFF1_CTRL_REG,
+			.bitmsk = VC3_DIFF1_CTRL_REG_DIFF1_CLK_SEL
 		},
 		.hw.init = &(struct clk_init_data){
-			.name = "se2_mux",
+			.name = "diff1_mux",
 			.ops = &vc3_clk_mux_ops,
 			.parent_hws = (const struct clk_hw *[]) {
-				&clk_div[VC3_DIV5].hw,
-				&clk_div[VC3_DIV4].hw
+				&clk_div[VC3_DIV1].hw,
+				&clk_div[VC3_DIV3].hw
 			},
 			.num_parents = 2,
 			.flags = CLK_SET_RATE_PARENT
 		}
 	},
-	[VC3_SE1_MUX] = {
+	[VC3_DIFF2_MUX] = {
 		.data = &(struct vc3_clk_data) {
-			.offs = VC3_SE1_DIV4_CTRL,
-			.bitmsk = VC3_SE1_DIV4_CTRL_SE1_CLK_SEL
+			.offs = VC3_DIFF2_CTRL_REG,
+			.bitmsk = VC3_DIFF2_CTRL_REG_DIFF2_CLK_SEL
 		},
 		.hw.init = &(struct clk_init_data){
-			.name = "se1_mux",
+			.name = "diff2_mux",
 			.ops = &vc3_clk_mux_ops,
 			.parent_hws = (const struct clk_hw *[]) {
-				&clk_div[VC3_DIV5].hw,
-				&clk_div[VC3_DIV4].hw
+				&clk_div[VC3_DIV1].hw,
+				&clk_div[VC3_DIV3].hw
 			},
 			.num_parents = 2,
 			.flags = CLK_SET_RATE_PARENT
@@ -1109,7 +1109,7 @@ static int vc3_probe(struct i2c_client *client)
 				name, 0, CLK_SET_RATE_PARENT, 1, 1);
 		else
 			clk_out[i] = devm_clk_hw_register_fixed_factor_parent_hw(dev,
-				name, &clk_mux[i].hw, CLK_SET_RATE_PARENT, 1, 1);
+				name, &clk_mux[i - 1].hw, CLK_SET_RATE_PARENT, 1, 1);
 
 		if (IS_ERR(clk_out[i]))
 			return PTR_ERR(clk_out[i]);
-- 
2.25.1




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux