Add support for PMOD_MTU3 macro to enable MTU3 node on RZ/G2UL SMARC EVK. The MTU3a PWM pins on PMOD0 are muxed with SPI1. Disable SPI1, when PMOD_MTU3 macro is enabled. Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx> --- v1->v2: No change. --- arch/arm64/boot/dts/renesas/r9a07g043u11-smarc.dts | 11 +++++++++++ .../boot/dts/renesas/rzg2ul-smarc-pinfunction.dtsi | 6 ++++++ arch/arm64/boot/dts/renesas/rzg2ul-smarc.dtsi | 13 +++++++++++++ 3 files changed, 30 insertions(+) diff --git a/arch/arm64/boot/dts/renesas/r9a07g043u11-smarc.dts b/arch/arm64/boot/dts/renesas/r9a07g043u11-smarc.dts index 01483b4302c2..8e0107df2d46 100644 --- a/arch/arm64/boot/dts/renesas/r9a07g043u11-smarc.dts +++ b/arch/arm64/boot/dts/renesas/r9a07g043u11-smarc.dts @@ -17,6 +17,17 @@ #define SW_SW0_DEV_SEL 1 #define SW_ET0_EN_N 1 +/* + * To enable MTU3a PWM on PMOD0, + * - Set DIP-Switch SW1-3 to On position. + * - Set PMOD_MTU3 macro to 1. + */ +#define PMOD_MTU3 0 + +#if (PMOD_MTU3 && !SW_ET0_EN_N) +#error "Cannot set as both PMOD_MTU3 and !SW_ET0_EN_N are mutually exclusive" +#endif + #include "r9a07g043u.dtsi" #include "rzg2ul-smarc-som.dtsi" #include "rzg2ul-smarc.dtsi" diff --git a/arch/arm64/boot/dts/renesas/rzg2ul-smarc-pinfunction.dtsi b/arch/arm64/boot/dts/renesas/rzg2ul-smarc-pinfunction.dtsi index 58923dc83faa..355694fe4af6 100644 --- a/arch/arm64/boot/dts/renesas/rzg2ul-smarc-pinfunction.dtsi +++ b/arch/arm64/boot/dts/renesas/rzg2ul-smarc-pinfunction.dtsi @@ -50,6 +50,12 @@ i2c1_pins: i2c1 { input-enable; }; + mtu3_pins: mtu3 { + mtu2-pwm { + pinmux = <RZG2L_PORT_PINMUX(4, 0, 4)>; /* MTIOC2A */ + }; + }; + scif0_pins: scif0 { pinmux = <RZG2L_PORT_PINMUX(6, 4, 6)>, /* TxD */ <RZG2L_PORT_PINMUX(6, 3, 6)>; /* RxD */ diff --git a/arch/arm64/boot/dts/renesas/rzg2ul-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg2ul-smarc.dtsi index 2a1331ed1a5c..8eb411aac80d 100644 --- a/arch/arm64/boot/dts/renesas/rzg2ul-smarc.dtsi +++ b/arch/arm64/boot/dts/renesas/rzg2ul-smarc.dtsi @@ -28,6 +28,19 @@ wm8978: codec@1a { }; }; +#if PMOD_MTU3 +&mtu3 { + pinctrl-0 = <&mtu3_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&spi1 { + status = "disabled"; +}; +#endif + #if (SW_ET0_EN_N) &ssi1 { pinctrl-0 = <&ssi1_pins>; -- 2.25.1