[PATCH 10/10] spi: rzv2m-csi: Make use of device_set_node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Use device_set_node instead of assigning controller->dev.of_node
directly.

Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@xxxxxxxxxxx>
---
 drivers/spi/spi-rzv2m-csi.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi-rzv2m-csi.c b/drivers/spi/spi-rzv2m-csi.c
index 1874ca1c2747..ad7ca514eb09 100644
--- a/drivers/spi/spi-rzv2m-csi.c
+++ b/drivers/spi/spi-rzv2m-csi.c
@@ -575,12 +575,13 @@ static int rzv2m_csi_probe(struct platform_device *pdev)
 	init_waitqueue_head(&csi->wait);
 
 	controller->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST;
-	controller->dev.of_node = pdev->dev.of_node;
 	controller->bits_per_word_mask = SPI_BPW_MASK(16) | SPI_BPW_MASK(8);
 	controller->setup = rzv2m_csi_setup;
 	controller->transfer_one = rzv2m_csi_transfer_one;
 	controller->use_gpio_descriptors = true;
 
+	device_set_node(&controller->dev, dev_fwnode(dev));
+
 	ret = devm_request_irq(dev, irq, rzv2m_csi_irq_handler, 0,
 			       dev_name(dev), csi);
 	if (ret)
-- 
2.34.1




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux