IRQs should be ready to serve when we call mmc_add_host() via
tmio_mmc_host_probe(). To achieve that, ensure that all irqs are masked
before registering the handlers.
Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
Tested-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
---
Additionally tested on a Renesas Ebisu board (R-Car E3).
Changes since v1:
* refactored setting sdcard_irq_mask_all (Thanks Geert!)
* added tag
drivers/mmc/host/renesas_sdhi_core.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/mmc/host/renesas_sdhi_core.c b/drivers/mmc/host/renesas_sdhi_core.c
index 345934e4f59e..2d5ef9c37d76 100644
--- a/drivers/mmc/host/renesas_sdhi_core.c
+++ b/drivers/mmc/host/renesas_sdhi_core.c
@@ -1006,6 +1006,8 @@ int renesas_sdhi_probe(struct platform_device *pdev,
host->sdcard_irq_setbit_mask = TMIO_STAT_ALWAYS_SET_27;
host->sdcard_irq_mask_all = TMIO_MASK_ALL_RCAR2;
host->reset = renesas_sdhi_reset;
+ } else {
+ host->sdcard_irq_mask_all = TMIO_MASK_ALL;
}
/* Orginally registers were 16 bit apart, could be 32 or 64 nowadays */
@@ -1100,9 +1102,7 @@ int renesas_sdhi_probe(struct platform_device *pdev,
host->ops.hs400_complete = renesas_sdhi_hs400_complete;
}
- ret = tmio_mmc_host_probe(host);
- if (ret < 0)
- goto edisclk;
+ sd_ctrl_write32_as_16_and_16(host, CTL_IRQ_MASK, host->sdcard_irq_mask_all);
num_irqs = platform_irq_count(pdev);
if (num_irqs < 0) {
@@ -1129,6 +1129,10 @@ int renesas_sdhi_probe(struct platform_device *pdev,
goto eirq;
}
+ ret = tmio_mmc_host_probe(host);
+ if (ret < 0)
+ goto edisclk;
+
dev_info(&pdev->dev, "%s base at %pa, max clock rate %u MHz\n",
mmc_hostname(host->mmc), &res->start, host->mmc->f_max / 1000000);
--
2.30.2
