On Thu, Jul 6, 2023 at 5:30 PM Biju Das <biju.das.jz@xxxxxxxxxxxxxx> wrote:
> Add support for PMOD_MTU3 macro to enable MTU3 node on RZ/{G2,V2}L SMARC
> EVK.
>
> The MTU3a PWM pins are muxed with spi1 pins and counter external input
> phase clock pins are muxed with scif2 pins. Disable these IPs when
> PMOD_MTU3 macro is enabled.
>
> Apart from this, the counter Z phase clock signal is muxed with the
> SDHI1 cd signal. So disable SDHI1 IP, when the counter Z phase signal
> is enabled.
>
> Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
> ---
> v1->v2:
> * Renamed macro MTU3->PMOD_MTU3.
> * Moved macro "PMOD1_SER0" from common dts to board-specific dts
> and added an error check as it is mutually exclusive with PMOD_MTU3
> macro.
> * Moved mtu3-zphase-clk pin definition to rzg2l-smarc-pinfunction.dtsi.
> * Moved mtu3 node to common dts.
> * Moved macro definitions before dtsi includes, so that macros are
> visible on these files.
Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
i.e. will queue in renesas-devel for v6.6.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
