RE: [PATCH v5 00/11] Add Renesas PMIC RAA215300 and built-in RTC support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi all,

I am planning to split this series into 3 patch series from next version
onwards.

Patch set 1: i2c core patch + PMIC patches, as PMIC driver patch depend upon i2c core patch.

Patch set 2: RTC patchset

Patch set 3: Device tree changes.

Hope it is ok to everyone.

Cheers,
Biju


> -----Original Message-----
> From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
> Sent: Monday, May 22, 2023 11:19 AM
> To: Wolfram Sang <wsa@xxxxxxxxxx>; Alessandro Zummo
> <a.zummo@xxxxxxxxxxxx>; Alexandre Belloni
> <alexandre.belloni@xxxxxxxxxxx>; Rob Herring <robh+dt@xxxxxxxxxx>;
> Krzysztof Kozlowski <krzysztof.kozlowski+dt@xxxxxxxxxx>
> Cc: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>; Liam Girdwood
> <lgirdwood@xxxxxxxxx>; Mark Brown <broonie@xxxxxxxxxx>; Geert
> Uytterhoeven <geert+renesas@xxxxxxxxx>; Magnus Damm
> <magnus.damm@xxxxxxxxx>; devicetree@xxxxxxxxxxxxxxx; linux-
> rtc@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; linux-renesas-
> soc@xxxxxxxxxxxxxxx; Fabrizio Castro <fabrizio.castro.jz@xxxxxxxxxxx>
> Subject: [PATCH v5 00/11] Add Renesas PMIC RAA215300 and built-in RTC
> support
> 
> This patch series aims to add support for Renesas PMIC RAA215300 and
> built-in RTC found on this PMIC device.
> 
> The details of PMIC can be found here[1].
> 
> Renesas PMIC RAA215300 exposes two separate i2c devices, one for the
> main device and another for rtc device.
> 
> Enhance i2c_new_ancillary_device() to instantiate a real device.
> (eg: Instantiate rtc device from PMIC driver)
> 
> The built-in RTC found on PMIC RAA215300 is the same as ISL1208.
> However, the external oscillator bit is inverted on PMIC version 0x11.
> The PMIC driver detects PMIC version and instantiate appropriate RTC
> device.
> 
> [1]
> https://www.renesas.com/in/en/products/power-power-management/multi-
> channel-power-management-ics-pmics/ssdsoc-power-management-ics-pmic-and-
> pmus/raa215300-high-performance-9-channel-pmic-supporting-ddr-memory-
> built-charger-and-rtc
> 
> Ref:
> 
> https://jpn01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpatchw
> ork.kernel.org%2Fproject%2Flinux-renesas-
> soc%2Fpatch%2F20230505091720.115675-1-
> biju.das.jz%40bp.renesas.com%2F&data=05%7C01%7Cbiju.das.jz%40bp.renesas.
> com%7C086829526c5a4b09386808db5aadf404%7C53d82571da1947e49cb4625a166a4a2
> a%7C0%7C0%7C638203475387281433%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwM
> DAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=
> bZIDac5ULa%2F%2BX9u8ZBlXjAaka8vl%2B8tYKOgcXIOpIrk%3D&reserved=0
> 
> https://jpn01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpatchw
> ork.kernel.org%2Fproject%2Flinux-renesas-
> soc%2Fpatch%2F20230505172530.357455-5-
> biju.das.jz%40bp.renesas.com%2F&data=05%7C01%7Cbiju.das.jz%40bp.renesas.
> com%7C086829526c5a4b09386808db5aadf404%7C53d82571da1947e49cb4625a166a4a2
> a%7C0%7C0%7C638203475387281433%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwM
> DAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=
> aKyxhnzMXfirtEcR3XuGAhl%2FUPc6J0Bkx1iEqdvorB8%3D&reserved=0
> 
> v4->v5:
>  * Replaced parameter dev->parent in __i2c_new_client_device() and
>    __i2c_new_dummy_device().
>  * Improved error message in __i2c_new_dummy_device() by printing device
> name.
>  * Updated comment for ancillary's device parent
>  * Dropped aux_device_name check in i2c_new_ancillary_device().
>  * Replaced oneOf->enum for clock-names as it is simpler.
>  * Added Rb tag from Conor for binding patches#3 and #9.
>  * Added Rb tag from Geert for patches#4, #5 and #6.
>  * Replaced "unsigned long"->"kernel_ulong_t" in isl1208_id[].
>  * Fixed the typo in commit description.
>  * Replaced the variable int_osc_en->xtosb_val for isl1208_set_xtoscb()
> and
>    changed the data type from bool->u8.
>  * Replaced devm_clk_get->devm_clk_get_optional() in probe.
>  * IS_ERR() related error is propagated and check for NULL to find out
>    if a clock is present.
>  * -ENOENT means clock not present, so any other errors are propagated.
>  * Dropped bool inverted parameter from isl1208_set_xtoscb() instead
>    using xor to compute the value of xtoscb.
>  * Added description for clocks in PMIC bindings patch.
>  * Dropped clk.h and started using of_property_present to check the
>    clocks.
> v3->v4:
>  * Dropped Rb tag from Geert for patch#1 as there are new changes.
>  * Introduced __i2c_new_dummy_device() to share the code between
>    i2c_new_dummy_device and i2c_new_ancillary_device().
>  * Introduced __i2c_new_client_device() to pass parent dev
>    parameter, so that the ancillary device can assign its parent during
>    creation.
>  * Added minItems to interrupt-names in binding patch.
>  * Added interrupt-names in conditional schema check.
>  * Documented clock and clock-names properties.
>  * Dropped unused name variable from struct isl1208_config.
>  * Make similar I2C and DT-based matching.
>  * Drop enum isl1208_id and split the array isl1208_configs[].
>  * Introduced isl1208_set_xtoscb() to set XTOSCB bit.
>  * Added support for internal oscillator enable/disable.
>  * Moved PMIC bindings from mfd->regulator.
>  * Dropped minItems from reg.
>  * Dropped renesas,rtc-enabled property and instead used clock-names
> property
>    to find RTC is enabled or not.
>  * Added reg-names in required property.
>  * Updated the example.
>  * Moved from mfd->regulator as it doesn't use MFD APIs
>  * Dropped handling "renesas,rtc-enabled" property and instead used
>    clock-names to determine RTC is enabled or not and then instantiating
>    RTC device.
>  * Added clock nodes.
> v2->v3:
>  * Enhanced i2c_new_ancillary_device() to instantiate a real
> ancillary_device().
>  * RTC device is instantiated by PMIC driver and dropped
> isl1208_probe_helper().
>  * Added "TYPE_RAA215300_RTC_A0" to handle inverted oscillator bit case.
>  * Added more detailed description for renesas,rtc-enabled property.
>  * Added support for handling "renesas,rtc-enabled" property.
>  * Based on PMIC version, it instantiates rtc device by calling i2c_new_
>    ancillary_device().
>  * Updated the logs.
> RFC->v2:
>  * Dropped the cross-links from bindings and used a single compatible
>    with separate i2c addresses for pmic main and rtc device.
>  * Dropped patch#4 and split patch#3 from this series and send as
>    separate patch to ML [2].
>  * Added RTC platform driver and mfd cell entry to the PMIC driver.RTC
>    platform driver creates rtc device by using
> i2c_new_ancillary_device()
>    and register the rtc device by calling the helper function provided
>    by rtc-isl2108 driver.
>  * Updated reg property in bindings.
>  * Added optional reg-names, interrupts and renesas,rtc-enabled
>    properties.
>  * Fixed the node name in the binding example
>  * Dropped the cross link property renesas,raa215300-rtc.
>  * Updated the binding example
>  * Dropped MODULE_SOFTDEP from the driver as it is added in RTC platform
>    driver.
>  * Dropped compatible "renesas,raa215300-isl1208" and
> "renesas,raa215300-pmic" property.
>  * Updated the comment polarity->bit for External Oscillator.
>  * Added raa215300_rtc_probe_helper() for registering raa215300_rtc
> device and
>    added the helper function isl1208_probe_helper() to share the code.
>  * Updated pmic device node on the SoM dtsi based on the bindings.
> 
> Logs:
> [   15.447305] rtc-isl1208 3-006f: registered as rtc0
> [   15.479493] rtc-isl1208 3-006f: setting system clock to 2023-04-
> 27T19:31:02 UTC (1682623862)
> 
> root@smarc-rzv2l:~# hwclock -r
> 2023-04-27 19:33:05.499001+00:00
> root@smarc-rzv2l:~# hwclock -r
> 2023-04-27 19:33:06.936688+00:00
> root@smarc-rzv2l:~#
> 
> Biju Das (11):
>   i2c: Enhance i2c_new_ancillary_device API
>   dt-bindings: rtc: isl1208: Convert to json-schema
>   dt-bindings: rtc: isil,isl1208: Document clock and clock-names
>     properties
>   rtc: isl1208: Drop name variable
>   rtc: isl1208: Make similar I2C and DT-based matching table
>   rtc: isl1208: Drop enum isl1208_id and split isl1208_configs[]
>   rtc: isl1208: Add isl1208_set_xtoscb()
>   rtc: isl1208: Add support for the built-in RTC on the PMIC RAA215300
>   regulator: dt-bindings: Add Renesas RAA215300 PMIC bindings
>   regulator: Add Renesas PMIC RAA215300 driver
>   arm64: dts: renesas: rzg2l-smarc-som: Enable PMIC and built-in RTC
> 
>  .../bindings/regulator/renesas,raa215300.yaml |  85 +++++++++++
> .../devicetree/bindings/rtc/isil,isl1208.txt  |  38 -----
> .../devicetree/bindings/rtc/isil,isl1208.yaml | 100 +++++++++++++
>  .../boot/dts/renesas/rzg2l-smarc-som.dtsi     |  18 +++
>  drivers/gpu/drm/bridge/adv7511/adv7511_drv.c  |   6 +-
>  drivers/i2c/i2c-core-base.c                   |  92 ++++++++----
>  drivers/media/i2c/adv748x/adv748x-core.c      |   2 +-
>  drivers/media/i2c/adv7604.c                   |   3 +-
>  drivers/regulator/Kconfig                     |   7 +
>  drivers/regulator/Makefile                    |   1 +
>  drivers/regulator/raa215300.c                 | 102 ++++++++++++++
>  drivers/rtc/rtc-isl1208.c                     | 133 ++++++++++++++----
>  include/linux/i2c.h                           |   3 +-
>  13 files changed, 484 insertions(+), 106 deletions(-)  create mode
> 100644
> Documentation/devicetree/bindings/regulator/renesas,raa215300.yaml
>  delete mode 100644
> Documentation/devicetree/bindings/rtc/isil,isl1208.txt
>  create mode 100644
> Documentation/devicetree/bindings/rtc/isil,isl1208.yaml
>  create mode 100644 drivers/regulator/raa215300.c
> 
> --
> 2.25.1





[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux