On Mon, May 22, 2023 at 12:19 PM Biju Das <biju.das.jz@xxxxxxxxxxxxxx> wrote:
> As per the HW manual, XTOSCB bit setting is as follows
>
> If using an external clock signal, set the XTOSCB bit as 1 to
> disable the crystal oscillator.
>
> If using an external crystal, the XTOSCB bit needs to be set at 0
> to enable the crystal oscillator.
>
> Document clock and clock-names properties.
>
> Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
> Reviewed-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
> ---
> v4->v5:
> * Replaced oneOf->enum for clock-names as it is simpler.
> * Added Rb tag from Conor.
Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
