RE: [EXT] [PATCH v15 08/22] PCI: designware-ep: Add INTx IRQs support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Frank,

> From: Frank Li, Sent: Tuesday, May 9, 2023 11:00 PM
> 
> > -       return -EINVAL;
> > +       ret = dw_pcie_ep_send_msg(ep, func_no, PCI_CODE_ASSERT_INTA,
> > +                                 PCI_MSG_ROUTING_LOCAL);
> > +       if (ret)
> > +               return ret;
> > +
> > +       /*
> > +        * The documents of PCIe and the controller don't mention how long
> > +        * the INTx should be asserted. If 10 usec, sometimes it failed.
> > +        * So, asserted for 50 usec.
> > +        */
> > +       usleep_range(50, 100);
> 
> [Frank Li] At least, comments should be updated. It should be level irq.
> Here is edge trigger because frame still not supported yet.  Will improve
> Later or some things. Otherwise comments is misleading.

Thank you for your comment! I think so. I'll update the comments on v16.

Best regards,
Yoshihiro Shimoda

> > +
> > +       return dw_pcie_ep_send_msg(ep, func_no,
> > PCI_CODE_DEASSERT_INTA,
> > +                                  PCI_MSG_ROUTING_LOCAL);
> >  }





[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux