RE: [PATCH v2] arm64: dts: renesas: Add IOMMU related properties into PCIe host nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Geert-san,

> From: Geert Uytterhoeven, Sent: Wednesday, May 3, 2023 9:39 PM
> 
> Hi Shimoda-san,
> 
> CC linux-pci
> 
> On Wed, Apr 26, 2023 at 10:28 AM Yoshihiro Shimoda
> <yoshihiro.shimoda.uh@xxxxxxxxxxx> wrote:
> > Add iommu-map and iommu-map-mask properties into PCIe host nodes.
> > Note that iommu-map-mask should be zero because the IPMMU assigns
> > one micro TLB ID only to the PCIe host.
> >
> > Also change dma-ranges arguments for IOMMU. Notes that the dma-ranges
> > can be used if IOMMU is disabled.
> >
> > Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
> 
> Thanks for your patch!
> 
> This is not really my area of expertise, but you can still find some
> questions and comments below...
> 
> > ---
> >  Changes from v1:
> >
<snip URL>
> >  - Drop iommus property.
> >  - Add iommu-map-mask property.
> >  - Revise the commit description.
> >
> >  arch/arm64/boot/dts/renesas/r8a77951.dtsi | 12 ++++++++----
> >  arch/arm64/boot/dts/renesas/r8a77960.dtsi | 12 ++++++++----
> >  arch/arm64/boot/dts/renesas/r8a77961.dtsi | 12 ++++++++----
> >  arch/arm64/boot/dts/renesas/r8a77965.dtsi | 12 ++++++++----
> >  arch/arm64/boot/dts/renesas/r8a77990.dtsi |  6 ++++--
> >  5 files changed, 36 insertions(+), 18 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/renesas/r8a77951.dtsi b/arch/arm64/boot/dts/renesas/r8a77951.dtsi
> > index 10b91e9733bf..2adec8b6c93f 100644
> > --- a/arch/arm64/boot/dts/renesas/r8a77951.dtsi
> > +++ b/arch/arm64/boot/dts/renesas/r8a77951.dtsi
> > @@ -2778,8 +2778,8 @@ pciec0: pcie@fe000000 {
> >                                  <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
> >                                  <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
> >                                  <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
> > -                       /* Map all possible DDR as inbound ranges */
> > -                       dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>;
> > +                       /* Map all possible DDR/IOMMU as inbound ranges */
> > +                       dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>;
> 
> So this is limited to the first 4 GiB of DDR (DDR0), i.e. to 32-bit
> address space? Shouldn't this include DDR1/2/3?

This controller can access within 32-bit address space only. So, we cannot include
DDR1/2/3.

> >                         interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
> >                                 <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
> >                                 <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
> > @@ -2790,6 +2790,8 @@ pciec0: pcie@fe000000 {
> >                         clock-names = "pcie", "pcie_bus";
> >                         power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
> >                         resets = <&cpg 319>;
> > +                       iommu-map = <0 &ipmmu_hc 0 0x10000>;
> 
> Reading
<snip URL>
> the above means you map 65536 RIDs n in the range 0..65535
> to  <&ipmmu_hc n>, while only micro-TLBs 0 and 1 are assigned to PCIe?

Yes. pciec0's ID is 0, and pciec1's ID is 1.

> Hence I think this should be:
> 
>     iommu-map = <0 &ipmmu_hc 0 1>;

I got it.

> > +                       iommu-map-mask = <0>;
> >                         status = "disabled";
> >                 };
> >
> > @@ -2805,8 +2807,8 @@ pciec1: pcie@ee800000 {
> >                                  <0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000>,
> >                                  <0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000>,
> >                                  <0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>;
> > -                       /* Map all possible DDR as inbound ranges */
> > -                       dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>;
> > +                       /* Map all possible DDR/IOMMU as inbound ranges */
> > +                       dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>;
> 
> Likewise.
> 
> >                         interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
> >                                 <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
> >                                 <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
> > @@ -2817,6 +2819,8 @@ pciec1: pcie@ee800000 {
> >                         clock-names = "pcie", "pcie_bus";
> >                         power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
> >                         resets = <&cpg 318>;
> > +                       iommu-map = <0 &ipmmu_hc 1 0x10000>;
> 
> Likewise, the above means you map 65536 RIDs n in the range 0..65535
> to  <&ipmmu_hc (1 + n)>?
> 
> Hence I think this should be:
> 
>     iommu-map = <0 &ipmmu_hc 1 1>;

I got it.

> > +                       iommu-map-mask = <0>;
> >                         status = "disabled";
> >                 };
> 
> Same comment for all other changes.

I'll fix all files.

> In addition, we need similar changes to r8a774{a1,b1,c0,e1}.dtsi,
> and slightly different changes (using ipmmu_vi0 uTLB 5) to r8a77980.dtsi.

I got it. I also modify these files.

Best regards,
Yoshihiro Shimoda

> Gr{oetje,eeting}s,
> 
>                         Geert
> 
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
> 
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
>                                 -- Linus Torvalds




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux