RE: [EXT] Re: [PATCH v14 08/21] PCI: dwc: Add support for triggering INTx IRQs from endpoint drivers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




> -----Original Message-----
> From: Serge Semin <fancer.lancer@xxxxxxxxx>
> Sent: Monday, May 1, 2023 2:25 PM
> To: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
> Cc: jingoohan1@xxxxxxxxx; mani@xxxxxxxxxx;
> gustavo.pimentel@xxxxxxxxxxxx; lpieralisi@xxxxxxxxxx;
> robh+dt@xxxxxxxxxx; kw@xxxxxxxxx; bhelgaas@xxxxxxxxxx;
> kishon@xxxxxxxxxx; marek.vasut+renesas@xxxxxxxxx; linux-
> pci@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; linux-renesas-
> soc@xxxxxxxxxxxxxxx
> Subject: [EXT] Re: [PATCH v14 08/21] PCI: dwc: Add support for triggering
> INTx IRQs from endpoint drivers
> 
> Caution: This is an external email. Please take care when clicking links or
> opening attachments. When in doubt, report the message using the 'Report
> this email' button
> 
> 
> On Wed, Apr 26, 2023 at 01:55:44PM +0900, Yoshihiro Shimoda wrote:
> > Add support for triggering INTx IRQs by using outbound iATU.
> > Outbound iATU is utilized to send assert and de-assert INTx TLPs.
> > The message is generated based on the payloadless Msg TLP with type
> > 0x14, where 0x4 is the routing code implying the Terminate at
> > Receiver message. The message code is specified as b1000xx for
> > the INTx assertion and b1001xx for the INTx de-assertion.
> 
> [PATCH v14 08/21] PCI: dwc: Add support for triggering INTx IRQs from
> endpoint drivers
> 
> What about shortening the subject out a bit:
> "PCI: designware-ep: Add INTx IRQs support"
> ?
> 
> >
> > Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
> > ---
> >  .../pci/controller/dwc/pcie-designware-ep.c   | 71 +++++++++++++++++--
> >  drivers/pci/controller/dwc/pcie-designware.h  |  2 +
> >  2 files changed, 69 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/pci/controller/dwc/pcie-designware-ep.c
> b/drivers/pci/controller/dwc/pcie-designware-ep.c
> > index 96375b0aba82..b35ed2b06193 100644
> > --- a/drivers/pci/controller/dwc/pcie-designware-ep.c
> > +++ b/drivers/pci/controller/dwc/pcie-designware-ep.c
> > @@ -6,6 +6,7 @@
> >   * Author: Kishon Vijay Abraham I <kishon@xxxxxx>
> >   */
> >
> > +#include <linux/delay.h>
> >  #include <linux/of.h>
> >  #include <linux/platform_device.h>
> >
> > @@ -485,14 +486,63 @@ static const struct pci_epc_ops epc_ops = {
> >       .get_features           = dw_pcie_ep_get_features,
> >  };
> >
> > +static int dw_pcie_ep_send_msg(struct dw_pcie_ep *ep, u8 func_no, u8
> code,
> > +                            u8 routing)
> > +{
> > +     struct dw_pcie_outbound_atu atu = { 0 };
> > +     struct pci_epc *epc = ep->epc;
> > +     int ret;
> > +
> > +     atu.func_no = func_no;
> > +     atu.code = code;
> > +     atu.routing = routing;
> > +     atu.type = PCIE_ATU_TYPE_MSG;
> > +     atu.cpu_addr = ep->intx_mem_phys;
> > +     atu.size = epc->mem->window.page_size;
> > +
> > +     ret = dw_pcie_ep_outbound_atu(ep, &atu);
> > +     if (ret)
> > +             return ret;
> > +
> > +     writel(0, ep->intx_mem);
> > +
> > +     dw_pcie_ep_unmap_addr(epc, func_no, 0, ep->intx_mem_phys);
> > +
> > +     return 0;
> > +}
> > +
> 
> > +static int __dw_pcie_ep_raise_intx_irq(struct dw_pcie_ep *ep, u8
> func_no,
> > +                                      int intx)
> > +{
> > +     int ret;
> > +
> > +     ret = dw_pcie_ep_send_msg(ep, func_no, PCI_CODE_ASSERT_INTA +
> intx,
> > +                               PCI_MSG_ROUTING_LOCAL);
> > +     if (ret)
> > +             return ret;
> > +
> > +     /*
> > +      * The documents of PCIe and the controller don't mention how long
> > +      * the INTx should be asserted. If 10 usec, sometimes it failed.
> > +      * So, asserted for 50 usec.
> > +      */
> > +     usleep_range(50, 100);

It is good method to implement legacy irq support. But there is problem which need be considered. 

According to PCI spec, section 6.2.1 PCI-compatible INTx Emulation

PCI Express emulates the PCI interrupt mechanism including the Interrupt Pin and Interrupt Line registers of the PCI
Configuration Space for PCI device Functions. PCI Express non-Switch devices may optionally support these registers for
backwards compatibility. Switch devices are required to support them. Actual interrupt signaling uses in-band Messages
rather than being signaled using physical pins.
Two types of Messages are defined, Assert_INTx and Deassert_INTx, for emulation of PCI INTx signaling, where x is A, B,
C, and D for respective PCI interrupt signals. These Messages are used to provide "virtual wires" for signaling interrupts
across a Link. Switches collect these virtual wires and present a combined set at the Switch's Upstream Port. Ultimately,
the virtual wires are routed to the Root Complex which maps the virtual wires to system interrupt resources. Devices
must use assert/deassert Messages in pairs to emulate PCI interrupt **level-triggered** signaling. Actual mapping of PCI
Express INTx emulation to system interrupts is implementation specific as is mapping of physical interrupt signals in
conventional PCI.

It should be level triggered.   When call __dw_pcie_ep_raise_intx_irq, should be just assert INTx, then after PCI
Host driver's  irq handler to clear irq,  EP side can desert INTx. 

So it should be two functions, one function raise INTx,  and another one desert INTx.   But I don't know
How to avoid host side possible flood irq happen if EP can't desert INTx in time.  


> > +
> > +     return dw_pcie_ep_send_msg(ep, func_no,
> PCI_CODE_DEASSERT_INTA + intx,
> > +                                PCI_MSG_ROUTING_LOCAL);
> > +}
> 
> Why do you need the underscored version of the method? I don't see it
> being utilized anywhere but in the dw_pcie_ep_raise_intx_irq()
> function. Thus its body can be completely moved to
> dw_pcie_ep_raise_intx_irq().
> 
> -Serge(y)
> 
> > +
> >  int dw_pcie_ep_raise_intx_irq(struct dw_pcie_ep *ep, u8 func_no)
> >  {
> >       struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> >       struct device *dev = pci->dev;
> >
> > -     dev_err(dev, "EP cannot trigger INTx IRQs\n");
> > +     if (!ep->intx_mem) {
> > +             dev_err(dev, "INTx not supported\n");
> > +             return -EOPNOTSUPP;
> > +     }
> >
> > -     return -EINVAL;
> > +     return __dw_pcie_ep_raise_intx_irq(ep, func_no, 0);
> >  }
> >  EXPORT_SYMBOL_GPL(dw_pcie_ep_raise_intx_irq);
> >
> > @@ -623,6 +673,10 @@ void dw_pcie_ep_exit(struct dw_pcie_ep *ep)
> >
> >       dw_pcie_edma_remove(pci);
> >
> > +     if (ep->intx_mem)
> > +             pci_epc_mem_free_addr(epc, ep->intx_mem_phys, ep-
> >intx_mem,
> > +                                   epc->mem->window.page_size);
> > +
> >       pci_epc_mem_free_addr(epc, ep->msi_mem_phys, ep->msi_mem,
> >                             epc->mem->window.page_size);
> >
> > @@ -794,9 +848,14 @@ int dw_pcie_ep_init(struct dw_pcie_ep *ep)
> >               goto err_exit_epc_mem;
> >       }
> >
> > +     ep->intx_mem = pci_epc_mem_alloc_addr(epc, &ep-
> >intx_mem_phys,
> > +                                           epc->mem->window.page_size);
> > +     if (!ep->intx_mem)
> > +             dev_warn(dev, "Failed to reserve memory for INTx\n");
> > +
> >       ret = dw_pcie_edma_detect(pci);
> >       if (ret)
> > -             goto err_free_epc_mem;
> > +             goto err_free_epc_mem_intx;
> >
> >       if (ep->ops->get_features) {
> >               epc_features = ep->ops->get_features(ep);
> > @@ -813,7 +872,11 @@ int dw_pcie_ep_init(struct dw_pcie_ep *ep)
> >  err_remove_edma:
> >       dw_pcie_edma_remove(pci);
> >
> > -err_free_epc_mem:
> > +err_free_epc_mem_intx:
> > +     if (ep->intx_mem)
> > +             pci_epc_mem_free_addr(epc, ep->intx_mem_phys, ep-
> >intx_mem,
> > +                                   epc->mem->window.page_size);
> > +
> >       pci_epc_mem_free_addr(epc, ep->msi_mem_phys, ep->msi_mem,
> >                             epc->mem->window.page_size);
> >
> > diff --git a/drivers/pci/controller/dwc/pcie-designware.h
> b/drivers/pci/controller/dwc/pcie-designware.h
> > index 954d504890a1..8c08159ea08e 100644
> > --- a/drivers/pci/controller/dwc/pcie-designware.h
> > +++ b/drivers/pci/controller/dwc/pcie-designware.h
> > @@ -369,6 +369,8 @@ struct dw_pcie_ep {
> >       unsigned long           *ob_window_map;
> >       void __iomem            *msi_mem;
> >       phys_addr_t             msi_mem_phys;
> > +     void __iomem            *intx_mem;
> > +     phys_addr_t             intx_mem_phys;
> >       struct pci_epf_bar      *epf_bar[PCI_STD_NUM_BARS];
> >  };
> >
> > --
> > 2.25.1
> >




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux