Re: [PATCH v4 1/5] tty: serial: sh-sci: Add RZ/G2L SCIFA DMA tx support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Biju,

On Fri, Apr 21, 2023 at 11:56 AM Biju Das <biju.das.jz@xxxxxxxxxxxxxx> wrote:
> > -----Original Message-----
> > From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
> > Sent: Friday, April 21, 2023 10:22 AM
> > To: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
> > Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>; Jiri Slaby
> > <jirislaby@xxxxxxxxxx>; linux-serial@xxxxxxxxxxxxxxx; Geert Uytterhoeven
> > <geert+renesas@xxxxxxxxx>; Prabhakar Mahadev Lad <prabhakar.mahadev-
> > lad.rj@xxxxxxxxxxxxxx>; linux-renesas-soc@xxxxxxxxxxxxxxx
> > Subject: Re: [PATCH v4 1/5] tty: serial: sh-sci: Add RZ/G2L SCIFA DMA tx
> > support
> >
> > Hi Biju,
> >
> > On Wed, Apr 12, 2023 at 4:51 PM Biju Das <biju.das.jz@xxxxxxxxxxxxxx> wrote:
> > > SCIFA IP on RZ/G2L SoC has the same signal for both interrupt and DMA
> > > transfer request. Setting DMARS register for DMA transfer makes the
> > > signal to work as a DMA transfer request signal and subsequent
> > > interrupt requests to the interrupt controller are masked. Similarly
> > > clearing DMARS register makes signal to work as interrupt signal and
> > > subsequent interrupt requests to the interrupt controller are
> > > unmasked.
> > >
> > > Add SCIFA DMA tx support for RZ/G2L alike SoCs by disabling TXI line
> > > interrupt and setting DMARS registers by DMA api for DMA transfer request.
> > >
> > > Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
> > > ---
> > > v3->v4:
> > >  * Updated commit description by removing tx end interrupt.
> >
> > Thanks for the update!
> >
> > > --- a/drivers/tty/serial/sh-sci.c
> > > +++ b/drivers/tty/serial/sh-sci.c
> > > @@ -588,12 +588,17 @@ static void sci_start_tx(struct uart_port *port)
> > >
> > >         if (s->chan_tx && !uart_circ_empty(&s->port.state->xmit) &&
> > >             dma_submit_error(s->cookie_tx)) {
> > > +               if (s->cfg->regtype == SCIx_RZ_SCIFA_REGTYPE)
> > > +                       /* Switch irq from SCIF to DMA */
> > > +                       disable_irq(s->irqs[SCIx_TXI_IRQ]);
> >
> > Please wrap this block inside curly braces.
>
> I thought, for single if statement braces not needed.
> That is why I haven't added. Am I missing anything here?

Technically, it's indeed a single statement.  But combined with the comment,
it spans multiple lines.

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux