Re: [PATCH v4 3/5] tty: serial: sh-sci: Fix TE setting on SCI IP

[Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>]

On Wed, Apr 12, 2023 at 4:51 PM Biju Das <biju.das.jz@xxxxxxxxxxxxxx> wrote:
> As per the RZ/G2L users hardware manual (Rev.1.20 Sep, 2022), section
> 23.3.7 Serial Data Transmission (Asynchronous Mode) it is mentioned
> that the TE (transmit enable) must be set after setting TIE (transmit
> interrupt enable) or these 2 bits are set to 1 simultaneously by a
> single instruction. So set these 2 bits in single instruction.
>
> Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
> ---
> v4:
>  * Removed fixes tag.

Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds