RAVB doesn't need mdiobus suspend/resume, that's why it sets
'mac_managed_pm'. However, setting it needs to be moved from init to
probe, so mdiobus PM functions will really never be called (e.g. when
the interface is not up yet during suspend/resume).
Fixes: 4924c0cdce75 ("net: ravb: Fix PHY state warning splat during system resume")
Suggested-by: Heiner Kallweit <hkallweit1@xxxxxxxxx>
Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
Reviewed-by: Michal Kubiak <michal.kubiak@xxxxxxxxx>
---
drivers/net/ethernet/renesas/ravb_main.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c
index 0f54849a3823..894e2690c643 100644
--- a/drivers/net/ethernet/renesas/ravb_main.c
+++ b/drivers/net/ethernet/renesas/ravb_main.c
@@ -1455,8 +1455,6 @@ static int ravb_phy_init(struct net_device *ndev)
phy_remove_link_mode(phydev, ETHTOOL_LINK_MODE_100baseT_Half_BIT);
}
- /* Indicate that the MAC is responsible for managing PHY PM */
- phydev->mac_managed_pm = true;
phy_attached_info(phydev);
return 0;
@@ -2379,6 +2377,8 @@ static int ravb_mdio_init(struct ravb_private *priv)
{
struct platform_device *pdev = priv->pdev;
struct device *dev = &pdev->dev;
+ struct phy_device *phydev;
+ struct device_node *pn;
int error;
/* Bitbang init */
@@ -2400,6 +2400,14 @@ static int ravb_mdio_init(struct ravb_private *priv)
if (error)
goto out_free_bus;
+ pn = of_parse_phandle(dev->of_node, "phy-handle", 0);
+ phydev = of_phy_find_device(pn);
+ if (phydev) {
+ phydev->mac_managed_pm = true;
+ put_device(&phydev->mdio.dev);
+ }
+ of_node_put(pn);
+
return 0;
out_free_bus:
--
2.30.2
