RE: [PATCH v13 6/6] pwm: Add Renesas RZ/G2L MTU3a PWM driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi All,

> Subject: [PATCH v13 6/6] pwm: Add Renesas RZ/G2L MTU3a PWM driver
> 
> The RZ/G2L Multi-Function Timer Pulse Unit 3 (a.k.a MTU3a) uses one counter
> and two match components to configure duty_cycle and period to generate PWM
> output waveform.
> 
> This patch adds basic support for RZ/G2L MTU3a PWM driver by creating
> separate PWM channels for each IOs.
> 
> Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
> ---
> v12->v13:
>  * Updated commit description
>  * Moved RZ_MTU3_TMDR1_MD_* macros to rz_mtu3.h
>  * Updated Limitations section.
>  * Removed PWM mode1 references from the driver.
>  * Dropped prescale and duty_cycle from struct rz_mtu3_pwm_chip.
>  * Replaced rz_mtu3_pwm_mode1_num_ios->rz_mtu3_hw_channel_ios.
>  * Avoided race condition in rz_mtu3_pwm_request()/rz_mtu3_pwm_free().
>  * Updated get_state() by adding dc > pv check and added a comment about
>    overflow condition.
>  * Moved overflow condition check from config->probe()
>  * Replaced pm_runtime_resume_and_get with unconditional
> pm_runtime_get_sync()
>    in config()
>  * Added error check for clk_prepare_enable() in probe() and propagating
> error
>    to the caller for pm_runtime_resume()
>  * clk_get_rate() is called after enabling the clock and
> clk_rate_exclusive_put()

Oops, typo here clk_rate_exclusive_put->clk_rate_exclusive_get()

Cheers,
Biju

> v11->v12:
>  * Updated header file to <linux/mfd/rz-mtu3.h> as core driver is in MFD.
>  * Reordered get_state()
> v10->v11:
>  * No change.
> v9->v10:
>  * No change.
> v8->v9:
>  * Added prescale/duty_cycle variables to struct rz_mtu3_pwm_chip and
>    cached this values in rz_mtu3_pwm_config and used this cached values
>    in get_state(), if PWM is disabled.
>  * Added return code for get_state()
> v7->v8:
>  * Simplified rz_mtu3_pwm_request by calling rz_mtu3_request_channel()
>  * Simplified rz_mtu3_pwm_free by calling rz_mtu3_release_channel()
> v6->v7:
>  * Added channel specific mutex lock to avoid race between counter
>    device and rz_mtu3_pwm_{request,free}
>  * Added pm_runtime_resume_and_get in rz_mtu3_pwm_enable()
>  * Added pm_runtime_put_sync in rz_mtu3_pwm_disable()
>  * Updated rz_mtu3_pwm_config()
>  * Updated rz_mtu3_pwm_apply()
> v5->v6:
>  * Updated commit and Kconfig description
>  * Sorted the header
>  * Replaced dev_get_drvdata from rz_mtu3_pwm_pm_disable()
>  * Replaced SET_RUNTIME_PM_OPS->DEFINE_RUNTIME_DEV_PM_OPS and removed
>    __maybe_unused from suspend/resume()
> v4->v5:
>  * pwm device is instantiated by mtu3a core driver.
> v3->v4:
>  * There is no resource associated with "rz-mtu3-pwm" compatible
>    and moved the code to mfd subsystem as it binds against "rz-mtu".
>  * Removed struct platform_driver rz_mtu3_pwm_driver.
> v2->v3:
>  * No change.
> v1->v2:
>  * Modelled as a single PWM device handling multiple channles.
>  * Used PM framework to manage the clocks.
> ---
>  drivers/pwm/Kconfig       |  11 +
>  drivers/pwm/Makefile      |   1 +
>  drivers/pwm/pwm-rz-mtu3.c | 480 ++++++++++++++++++++++++++++++++++++++
>  3 files changed, 492 insertions(+)
>  create mode 100644 drivers/pwm/pwm-rz-mtu3.c
> 
> diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig index
> 31cdc9dae3c5..c54cbeabe093 100644
> --- a/drivers/pwm/Kconfig
> +++ b/drivers/pwm/Kconfig
> @@ -492,6 +492,17 @@ config PWM_ROCKCHIP
>  	  Generic PWM framework driver for the PWM controller found on
>  	  Rockchip SoCs.
> 
> +config PWM_RZ_MTU3
> +	tristate "Renesas RZ/G2L MTU3a PWM Timer support"
> +	depends on RZ_MTU3 || COMPILE_TEST
> +	depends on HAS_IOMEM
> +	help
> +	  This driver exposes the MTU3a PWM Timer controller found in Renesas
> +	  RZ/G2L like chips through the PWM API.
> +
> +	  To compile this driver as a module, choose M here: the module
> +	  will be called pwm-rz-mtu3.
> +
>  config PWM_SAMSUNG
>  	tristate "Samsung PWM support"
>  	depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
> diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile index
> a95aabae9115..6b75c0145336 100644
> --- a/drivers/pwm/Makefile
> +++ b/drivers/pwm/Makefile
> @@ -45,6 +45,7 @@ obj-$(CONFIG_PWM_RCAR)		+= pwm-rcar.o
>  obj-$(CONFIG_PWM_RENESAS_TPU)	+= pwm-renesas-tpu.o
>  obj-$(CONFIG_PWM_RZV2M)		+= pwm-rzv2m.o
>  obj-$(CONFIG_PWM_ROCKCHIP)	+= pwm-rockchip.o
> +obj-$(CONFIG_PWM_RZ_MTU3)	+= pwm-rz-mtu3.o
>  obj-$(CONFIG_PWM_SAMSUNG)	+= pwm-samsung.o
>  obj-$(CONFIG_PWM_SIFIVE)	+= pwm-sifive.o
>  obj-$(CONFIG_PWM_SL28CPLD)	+= pwm-sl28cpld.o
> diff --git a/drivers/pwm/pwm-rz-mtu3.c b/drivers/pwm/pwm-rz-mtu3.c new file
> mode 100644 index 000000000000..1416c033edb4
> --- /dev/null
> +++ b/drivers/pwm/pwm-rz-mtu3.c
> @@ -0,0 +1,480 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Renesas RZ/G2L MTU3a PWM Timer driver
> + *
> + * Copyright (C) 2022 Renesas Electronics Corporation
> + *
> + * Hardware manual for this IP can be found here
> + *
> +https://www.renesas.com/eu/en/document/mah/rzg2l-group-rzg2lc-group-use
> +rs-manual-hardware-0?language=en
> + *
> + * Limitations:
> + * - When PWM is disabled, the output is driven to Hi-Z.
> + * - While the hardware supports both polarities, the driver (for now)
> + *   only handles normal polarity.
> + * - HW uses one counter and two match components to configure duty_cycle
> + *   and period.
> + * - Multi-Function Timer Pulse Unit(a.k.a MTU) has 7 HW channels for PWM
> + *   PWM operatins(MTU{0..4, 6, 7}).
> + * - MTU{1, 2} channels have a single IO, whereas all other channels have 2
> IOs.
> + * - Each IO is modeled as an independent PWM channel.
> + * - A table rz_mtu3_hw_channel_ios table is used to map the PWM channel to
> the
> + *   corresponding HW channel and vice versa.
> + */
> +
> +#include <linux/bitfield.h>
> +#include <linux/clk.h>
> +#include <linux/limits.h>
> +#include <linux/mfd/rz-mtu3.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/pwm.h>
> +#include <linux/time.h>
> +
> +#define RZ_MTU3_TIOR_OC_RETAIN		(0)
> +#define RZ_MTU3_TIOR_OC_0_H_COMP_MATCH	(2)
> +#define RZ_MTU3_TIOR_OC_1_TOGGLE	(7)
> +#define RZ_MTU3_TIOR_OC_IOA		GENMASK(3, 0)
> +
> +#define RZ_MTU3_TCR_CCLR_TGRC		(5 << 5)
> +#define RZ_MTU3_TCR_CKEG_RISING		(0 << 3)
> +
> +#define RZ_MTU3_TCR_TPCS		GENMASK(2, 0)
> +
> +#define RZ_MTU3_MAX_PWM_CHANNELS	(12)
> +
> +#define RZ_MTU3_MAX_HW_CHANNELS	(7)
> +
> +/* The below table represents the number of IOs on each MTU HW channel.
> +*/ static const u8 rz_mtu3_hw_channel_ios[] = { 2, 1, 1, 2, 2, 2, 2 };
> +
> +/**
> + * struct rz_mtu3_pwm_chip - MTU3 pwm private data
> + *
> + * @chip: MTU3 pwm chip data
> + * @clk: MTU3 module clock
> + * @lock: Lock to prevent concurrent access for usage count
> + * @rate: MTU3 clock rate
> + * @user_count: MTU3 usage count
> + * @rz_mtu3_channel: HW channels for the PWM  */
> +
> +struct rz_mtu3_pwm_chip {
> +	struct pwm_chip chip;
> +	struct clk *clk;
> +	struct mutex lock;
> +	unsigned long rate;
> +	u32 user_count[RZ_MTU3_MAX_HW_CHANNELS];
> +	struct rz_mtu3_channel *ch[RZ_MTU3_MAX_HW_CHANNELS]; };
> +
> +static inline struct rz_mtu3_pwm_chip *to_rz_mtu3_pwm_chip(struct
> +pwm_chip *chip) {
> +	return container_of(chip, struct rz_mtu3_pwm_chip, chip); }
> +
> +static u8 rz_mtu3_pwm_calculate_prescale(struct rz_mtu3_pwm_chip *rz_mtu3,
> +					 u64 period_cycles)
> +{
> +	u32 prescaled_period_cycles;
> +	u8 prescale;
> +
> +	prescaled_period_cycles = period_cycles >> 16;
> +	if (prescaled_period_cycles >= 16)
> +		prescale = 3;
> +	else
> +		prescale = (fls(prescaled_period_cycles) + 1) / 2;
> +
> +	return prescale;
> +}
> +
> +static struct rz_mtu3_channel *
> +rz_mtu3_get_hw_channel(struct rz_mtu3_pwm_chip *rz_mtu3_pwm, u32
> +channel) {
> +	unsigned int i, ch_index = 0;
> +
> +	for (i = 0; i < ARRAY_SIZE(rz_mtu3_hw_channel_ios); i++) {
> +		ch_index += rz_mtu3_hw_channel_ios[i];
> +
> +		if (ch_index > channel)
> +			break;
> +	}
> +
> +	return rz_mtu3_pwm->ch[i];
> +}
> +
> +static u32 rz_mtu3_get_hw_channel_index(struct rz_mtu3_pwm_chip
> *rz_mtu3_pwm,
> +					struct rz_mtu3_channel *ch)
> +{
> +	u32 i;
> +
> +	for (i = 0; i < ARRAY_SIZE(rz_mtu3_hw_channel_ios); i++) {
> +		if (ch == rz_mtu3_pwm->ch[i])
> +			break;
> +	}
> +
> +	return i;
> +}
> +
> +static bool rz_mtu3_pwm_is_second_channel(u32 ch_index, u32 hwpwm) {
> +	u32 i, pwm_ch_index = 0;
> +
> +	for (i = 0; i < ch_index; i++)
> +		pwm_ch_index += rz_mtu3_hw_channel_ios[i];
> +
> +	return pwm_ch_index != hwpwm;
> +}
> +
> +static bool rz_mtu3_pwm_is_ch_enabled(struct rz_mtu3_pwm_chip *rz_mtu3_pwm,
> +				      u32 hwpwm)
> +{
> +	struct rz_mtu3_channel *ch;
> +	bool is_channel_en;
> +	u32 ch_index;
> +	u8 val;
> +
> +	ch = rz_mtu3_get_hw_channel(rz_mtu3_pwm, hwpwm);
> +	ch_index = rz_mtu3_get_hw_channel_index(rz_mtu3_pwm, ch);
> +	is_channel_en = rz_mtu3_is_enabled(ch);
> +
> +	if (rz_mtu3_pwm_is_second_channel(ch_index, hwpwm))
> +		val = rz_mtu3_8bit_ch_read(ch, RZ_MTU3_TIORL);
> +	else
> +		val = rz_mtu3_8bit_ch_read(ch, RZ_MTU3_TIORH);
> +
> +	return (is_channel_en && (val & RZ_MTU3_TIOR_OC_IOA)); }
> +
> +static int rz_mtu3_pwm_request(struct pwm_chip *chip, struct pwm_device
> +*pwm) {
> +	struct rz_mtu3_pwm_chip *rz_mtu3_pwm = to_rz_mtu3_pwm_chip(chip);
> +	struct rz_mtu3_channel *ch;
> +	u32 ch_index;
> +
> +	mutex_lock(&rz_mtu3_pwm->lock);
> +	ch = rz_mtu3_get_hw_channel(rz_mtu3_pwm, pwm->hwpwm);
> +	ch_index = rz_mtu3_get_hw_channel_index(rz_mtu3_pwm, ch);
> +	if (!rz_mtu3_pwm->user_count[ch_index] &&
> !rz_mtu3_request_channel(ch)) {
> +		mutex_unlock(&rz_mtu3_pwm->lock);
> +		return -EBUSY;
> +	}
> +
> +	rz_mtu3_pwm->user_count[ch_index]++;
> +	mutex_unlock(&rz_mtu3_pwm->lock);
> +
> +	return 0;
> +}
> +
> +static void rz_mtu3_pwm_free(struct pwm_chip *chip, struct pwm_device
> +*pwm) {
> +	struct rz_mtu3_pwm_chip *rz_mtu3_pwm = to_rz_mtu3_pwm_chip(chip);
> +	struct rz_mtu3_channel *ch;
> +	u32 ch_index;
> +
> +	mutex_lock(&rz_mtu3_pwm->lock);
> +	ch = rz_mtu3_get_hw_channel(rz_mtu3_pwm, pwm->hwpwm);
> +	ch_index = rz_mtu3_get_hw_channel_index(rz_mtu3_pwm, ch);
> +
> +	rz_mtu3_pwm->user_count[ch_index]--;
> +	if (!rz_mtu3_pwm->user_count[ch_index])
> +		rz_mtu3_release_channel(ch);
> +
> +	mutex_unlock(&rz_mtu3_pwm->lock);
> +}
> +
> +static int rz_mtu3_pwm_enable(struct rz_mtu3_pwm_chip *rz_mtu3_pwm,
> +			      struct pwm_device *pwm)
> +{
> +	struct rz_mtu3_channel *ch;
> +	u32 ch_index;
> +	u8 val;
> +	int rc;
> +
> +	rc = pm_runtime_resume_and_get(rz_mtu3_pwm->chip.dev);
> +	if (rc)
> +		return rc;
> +
> +	ch = rz_mtu3_get_hw_channel(rz_mtu3_pwm, pwm->hwpwm);
> +	ch_index = rz_mtu3_get_hw_channel_index(rz_mtu3_pwm, ch);
> +	val = (RZ_MTU3_TIOR_OC_1_TOGGLE << 4) |
> +RZ_MTU3_TIOR_OC_0_H_COMP_MATCH;
> +
> +	rz_mtu3_8bit_ch_write(ch, RZ_MTU3_TMDR1, RZ_MTU3_TMDR1_MD_PWMMODE1);
> +	if (rz_mtu3_pwm_is_second_channel(ch_index, pwm->hwpwm))
> +		rz_mtu3_8bit_ch_write(ch, RZ_MTU3_TIORL, val);
> +	else
> +		rz_mtu3_8bit_ch_write(ch, RZ_MTU3_TIORH, val);
> +
> +	if (rz_mtu3_pwm->user_count[ch_index] <= 1)
> +		rz_mtu3_enable(ch);
> +
> +	return 0;
> +}
> +
> +static void rz_mtu3_pwm_disable(struct rz_mtu3_pwm_chip *rz_mtu3_pwm,
> +				struct pwm_device *pwm)
> +{
> +	struct rz_mtu3_channel *ch;
> +	u32 ch_index;
> +
> +	ch = rz_mtu3_get_hw_channel(rz_mtu3_pwm, pwm->hwpwm);
> +	ch_index = rz_mtu3_get_hw_channel_index(rz_mtu3_pwm, ch);
> +
> +	/* Return to normal mode and disable output pins of MTU3 channel */
> +	if (rz_mtu3_pwm->user_count[ch_index] <= 1)
> +		rz_mtu3_8bit_ch_write(ch, RZ_MTU3_TMDR1,
> RZ_MTU3_TMDR1_MD_NORMAL);
> +
> +	if (rz_mtu3_pwm_is_second_channel(ch_index, pwm->hwpwm))
> +		rz_mtu3_8bit_ch_write(ch, RZ_MTU3_TIORL,
> RZ_MTU3_TIOR_OC_RETAIN);
> +	else
> +		rz_mtu3_8bit_ch_write(ch, RZ_MTU3_TIORH,
> RZ_MTU3_TIOR_OC_RETAIN);
> +
> +	if (rz_mtu3_pwm->user_count[ch_index] <= 1)
> +		rz_mtu3_disable(ch);
> +
> +	pm_runtime_put_sync(rz_mtu3_pwm->chip.dev);
> +}
> +
> +static int rz_mtu3_pwm_get_state(struct pwm_chip *chip, struct pwm_device
> *pwm,
> +				 struct pwm_state *state)
> +{
> +	struct rz_mtu3_pwm_chip *rz_mtu3_pwm = to_rz_mtu3_pwm_chip(chip);
> +	struct rz_mtu3_channel *ch;
> +	u8 prescale, val;
> +	u32 ch_index;
> +	u16 dc, pv;
> +	u64 tmp;
> +
> +	ch = rz_mtu3_get_hw_channel(rz_mtu3_pwm, pwm->hwpwm);
> +	ch_index = rz_mtu3_get_hw_channel_index(rz_mtu3_pwm, ch);
> +	pm_runtime_get_sync(chip->dev);
> +	state->enabled = rz_mtu3_pwm_is_ch_enabled(rz_mtu3_pwm, pwm->hwpwm);
> +	if (state->enabled) {
> +		val = rz_mtu3_8bit_ch_read(ch, RZ_MTU3_TCR);
> +		prescale = FIELD_GET(RZ_MTU3_TCR_TPCS, val);
> +
> +		if (rz_mtu3_pwm_is_second_channel(ch_index, pwm->hwpwm)) {
> +			dc = rz_mtu3_16bit_ch_read(ch, RZ_MTU3_TGRD);
> +			pv = rz_mtu3_16bit_ch_read(ch, RZ_MTU3_TGRC);
> +		} else {
> +			dc = rz_mtu3_16bit_ch_read(ch, RZ_MTU3_TGRB);
> +			pv = rz_mtu3_16bit_ch_read(ch, RZ_MTU3_TGRA);
> +		}
> +
> +		/* With prescale <= 7 and pv <= 0xffff this doesn't overflow.
> */
> +		tmp = NSEC_PER_SEC * (u64)pv << (2 * prescale);
> +		state->period = DIV_ROUND_UP_ULL(tmp, rz_mtu3_pwm->rate);
> +		tmp = NSEC_PER_SEC * (u64)dc << (2 * prescale);
> +		state->duty_cycle = DIV_ROUND_UP_ULL(tmp, rz_mtu3_pwm->rate);
> +	}
> +
> +	if (state->duty_cycle > state->period)
> +		state->duty_cycle = state->period;
> +
> +	state->polarity = PWM_POLARITY_NORMAL;
> +	pm_runtime_put(chip->dev);
> +
> +	return 0;
> +}
> +
> +static int rz_mtu3_pwm_config(struct pwm_chip *chip, struct pwm_device
> *pwm,
> +			      const struct pwm_state *state) {
> +	struct rz_mtu3_pwm_chip *rz_mtu3_pwm = to_rz_mtu3_pwm_chip(chip);
> +	struct rz_mtu3_channel *ch;
> +	unsigned long pv, dc;
> +	u64 period_cycles;
> +	u64 duty_cycles;
> +	u32 ch_index;
> +	u8 prescale;
> +	u8 val;
> +
> +	ch = rz_mtu3_get_hw_channel(rz_mtu3_pwm, pwm->hwpwm);
> +	ch_index = rz_mtu3_get_hw_channel_index(rz_mtu3_pwm, ch);
> +	period_cycles = mul_u64_u32_div(state->period, rz_mtu3_pwm->rate,
> +					NSEC_PER_SEC);
> +	prescale = rz_mtu3_pwm_calculate_prescale(rz_mtu3_pwm, period_cycles);
> +
> +	if (period_cycles >> (2 * prescale) <= U16_MAX)
> +		pv = period_cycles >> (2 * prescale);
> +	else
> +		pv = U16_MAX;
> +
> +	duty_cycles = mul_u64_u32_div(state->duty_cycle, rz_mtu3_pwm->rate,
> +				      NSEC_PER_SEC);
> +	if (duty_cycles >> (2 * prescale) <= U16_MAX)
> +		dc = duty_cycles >> (2 * prescale);
> +	else
> +		dc = U16_MAX;
> +
> +	/*
> +	 * If the PWM channel is disabled, make sure to turn on the clock
> +	 * before writing the register.
> +	 */
> +	if (!pwm->state.enabled)
> +		pm_runtime_get_sync(chip->dev);
> +
> +	val = RZ_MTU3_TCR_CKEG_RISING | prescale;
> +	if (rz_mtu3_pwm_is_second_channel(ch_index, pwm->hwpwm)) {
> +		rz_mtu3_8bit_ch_write(ch, RZ_MTU3_TCR,
> +				      RZ_MTU3_TCR_CCLR_TGRC | val);
> +		rz_mtu3_16bit_ch_write(ch, RZ_MTU3_TGRD, dc);
> +		rz_mtu3_16bit_ch_write(ch, RZ_MTU3_TGRC, pv);
> +	} else {
> +		rz_mtu3_8bit_ch_write(ch, RZ_MTU3_TCR,
> +				      RZ_MTU3_TCR_CCLR_TGRA | val);
> +		rz_mtu3_16bit_ch_write(ch, RZ_MTU3_TGRB, dc);
> +		rz_mtu3_16bit_ch_write(ch, RZ_MTU3_TGRA, pv);
> +	}
> +
> +	/* If the PWM is not enabled, turn the clock off again to save power.
> */
> +	if (!pwm->state.enabled)
> +		pm_runtime_put(chip->dev);
> +
> +	return 0;
> +}
> +
> +static int rz_mtu3_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
> +			     const struct pwm_state *state)
> +{
> +	struct rz_mtu3_pwm_chip *rz_mtu3_pwm = to_rz_mtu3_pwm_chip(chip);
> +	bool enabled = pwm->state.enabled;
> +	int ret;
> +
> +	if (state->polarity != PWM_POLARITY_NORMAL)
> +		return -EINVAL;
> +
> +	if (!state->enabled) {
> +		if (enabled)
> +			rz_mtu3_pwm_disable(rz_mtu3_pwm, pwm);
> +
> +		return 0;
> +	}
> +
> +	ret = rz_mtu3_pwm_config(chip, pwm, state);
> +	if (ret)
> +		return ret;
> +
> +	if (!enabled)
> +		ret = rz_mtu3_pwm_enable(rz_mtu3_pwm, pwm);
> +
> +	return ret;
> +}
> +
> +static const struct pwm_ops rz_mtu3_pwm_ops = {
> +	.request = rz_mtu3_pwm_request,
> +	.free = rz_mtu3_pwm_free,
> +	.get_state = rz_mtu3_pwm_get_state,
> +	.apply = rz_mtu3_pwm_apply,
> +	.owner = THIS_MODULE,
> +};
> +
> +static int rz_mtu3_pwm_pm_runtime_suspend(struct device *dev) {
> +	struct rz_mtu3_pwm_chip *rz_mtu3_pwm = dev_get_drvdata(dev);
> +
> +	clk_disable_unprepare(rz_mtu3_pwm->clk);
> +
> +	return 0;
> +}
> +
> +static int rz_mtu3_pwm_pm_runtime_resume(struct device *dev) {
> +	struct rz_mtu3_pwm_chip *rz_mtu3_pwm = dev_get_drvdata(dev);
> +
> +	return clk_prepare_enable(rz_mtu3_pwm->clk);
> +}
> +
> +static DEFINE_RUNTIME_DEV_PM_OPS(rz_mtu3_pwm_pm_ops,
> +				 rz_mtu3_pwm_pm_runtime_suspend,
> +				 rz_mtu3_pwm_pm_runtime_resume, NULL);
> +
> +static void rz_mtu3_pwm_pm_disable(void *data) {
> +	struct rz_mtu3_pwm_chip *rz_mtu3_pwm = data;
> +
> +	clk_rate_exclusive_put(rz_mtu3_pwm->clk);
> +	pm_runtime_disable(rz_mtu3_pwm->chip.dev);
> +	pm_runtime_set_suspended(rz_mtu3_pwm->chip.dev);
> +}
> +
> +static int rz_mtu3_pwm_probe(struct platform_device *pdev) {
> +	struct rz_mtu3 *ddata = dev_get_drvdata(pdev->dev.parent);
> +	struct rz_mtu3_pwm_chip *rz_mtu3_pwm;
> +	struct device *dev = &pdev->dev;
> +	int num_pwm_hw_ch = 0;
> +	unsigned int i;
> +	int ret;
> +
> +	rz_mtu3_pwm = devm_kzalloc(&pdev->dev, sizeof(*rz_mtu3_pwm),
> GFP_KERNEL);
> +	if (!rz_mtu3_pwm)
> +		return -ENOMEM;
> +
> +	rz_mtu3_pwm->clk = ddata->clk;
> +
> +	for (i = 0; i < RZ_MTU_NUM_CHANNELS; i++) {
> +		if (i == RZ_MTU5 || i == RZ_MTU8)
> +			continue;
> +
> +		rz_mtu3_pwm->ch[num_pwm_hw_ch] = &ddata->channels[i];
> +		rz_mtu3_pwm->ch[num_pwm_hw_ch]->dev = dev;
> +		num_pwm_hw_ch++;
> +	}
> +
> +	mutex_init(&rz_mtu3_pwm->lock);
> +	platform_set_drvdata(pdev, rz_mtu3_pwm);
> +	ret = clk_prepare_enable(rz_mtu3_pwm->clk);
> +	if (ret)
> +		return dev_err_probe(dev, ret, "Clock enable failed\n");
> +
> +	clk_rate_exclusive_get(rz_mtu3_pwm->clk);
> +
> +	rz_mtu3_pwm->rate = clk_get_rate(rz_mtu3_pwm->clk);
> +	/*
> +	 * Refuse clk rates > 1 GHz to prevent overflow later for computing
> +	 * period and duty cycle.
> +	 */
> +	if (rz_mtu3_pwm->rate > NSEC_PER_SEC) {
> +		ret = -EINVAL;
> +		clk_rate_exclusive_put(rz_mtu3_pwm->clk);
> +		goto disable_clock;
> +	}
> +
> +	pm_runtime_set_active(&pdev->dev);
> +	pm_runtime_enable(&pdev->dev);
> +	ret = devm_add_action_or_reset(&pdev->dev,
> +				       rz_mtu3_pwm_pm_disable,
> +				       rz_mtu3_pwm);
> +	if (ret < 0)
> +		goto disable_clock;
> +
> +	rz_mtu3_pwm->chip.dev = &pdev->dev;
> +	rz_mtu3_pwm->chip.ops = &rz_mtu3_pwm_ops;
> +	rz_mtu3_pwm->chip.npwm = RZ_MTU3_MAX_PWM_CHANNELS;
> +	ret = devm_pwmchip_add(&pdev->dev, &rz_mtu3_pwm->chip);
> +	if (ret) {
> +		dev_err_probe(&pdev->dev, ret, "failed to add PWM chip\n");
> +		goto disable_clock;
> +	}
> +
> +	return 0;
> +
> +disable_clock:
> +	clk_disable_unprepare(rz_mtu3_pwm->clk);
> +	return ret;
> +}
> +
> +static struct platform_driver rz_mtu3_pwm_driver = {
> +	.driver = {
> +		.name = "pwm-rz-mtu3",
> +		.pm = pm_ptr(&rz_mtu3_pwm_pm_ops),
> +	},
> +	.probe = rz_mtu3_pwm_probe,
> +};
> +module_platform_driver(rz_mtu3_pwm_driver);
> +
> +MODULE_AUTHOR("Biju Das <biju.das.jz@xxxxxxxxxxxxxx>");
> +MODULE_ALIAS("platform:pwm-rz-mtu3");
> +MODULE_DESCRIPTION("Renesas RZ/G2L MTU3a PWM Timer Driver");
> +MODULE_LICENSE("GPL");
> --
> 2.25.1





[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux