The Draak board has an ADV7180 CVBS decoder and an ADV7612 HDMI decoder,
both connected to the same VIN input. DIP switches are used to select
one of the two devices, with the CVBS decoder being the default. Add an
overlay that selects the HDMI decoder.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
---
Niklas, would this be an acceptable way to handle the DIP switches on
the Draak board ?
---
arch/arm64/boot/dts/renesas/Makefile | 1 +
.../boot/dts/renesas/draak-hdmi-input.dtso | 33 +++++++++++++++++++
2 files changed, 34 insertions(+)
create mode 100644 arch/arm64/boot/dts/renesas/draak-hdmi-input.dtso
diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index 0699b51c1247..de4170af611e 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -88,4 +88,5 @@ dtb-$(CONFIG_ARCH_R9A07G054) += r9a07g054l2-smarc.dtb
dtb-$(CONFIG_ARCH_R9A09G011) += r9a09g011-v2mevk2.dtb
dtb-$(CONFIG_ARCH_RCAR_GEN3) += draak-ebisu-panel-aa104xd12.dtbo
+dtb-$(CONFIG_ARCH_RCAR_GEN3) += draak-hdmi-input.dtbo
dtb-$(CONFIG_ARCH_RCAR_GEN3) += salvator-panel-aa104xd12.dtbo
diff --git a/arch/arm64/boot/dts/renesas/draak-hdmi-input.dtso b/arch/arm64/boot/dts/renesas/draak-hdmi-input.dtso
new file mode 100644
index 000000000000..e0d671f0cab3
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/draak-hdmi-input.dtso
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2023 Ideas on Board Oy
+ *
+ * Device tree overlay for the Draak board, to enable HDMI input. This requires
+ * setting DIP switches SW49, SW50, SW51 and SW52 to ON, and SW53 and SW54 to
+ * OFF.
+ */
+
+/dts-v1/;
+/plugin/;
+
+&adv7612_out {
+ remote-endpoint = <&vin4_in>;
+};
+
+&i2c0 {
+ composite-in@20 {
+ ports {
+ port@3 {
+ /delete-node/ endpoint;
+ };
+ };
+ };
+};
+
+&vin4_in {
+ remote-endpoint = <&adv7612_out>;
+};
+
+&vin4_pins_cvbs {
+ groups = "vin4_data24", "vin4_sync", "vin4_clk";
+};
--
Regards,
Laurent Pinchart
