On 07/02/2023 15:54, Clément Léger wrote:
> The EB board (Expansion board) supports both RZ/N1D and RZ-N1S. Since this
> configuration targets only the RZ/N1D, it is named r9a06g032-rzn1d400-eb.
> It adds support for the 2 additional switch ports (port C and D) that are
> available on that board.
>
> Signed-off-by: Clément Léger <clement.leger@xxxxxxxxxxx>
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/r9a06g032-rzn1d400-eb.dts | 92 +++++++++++++++++++++
> 2 files changed, 93 insertions(+)
> create mode 100644 arch/arm/boot/dts/r9a06g032-rzn1d400-eb.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index d08a3c450ce7..8938db01e939 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -1123,6 +1123,7 @@ dtb-$(CONFIG_ARCH_RENESAS) += \
> r8a7794-alt.dtb \
> r8a7794-silk.dtb \
> r9a06g032-rzn1d400-db.dtb \
> + r9a06g032-rzn1d400-eb.dtb \
> sh73a0-kzm9g.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += \
> rv1108-elgin-r1.dtb \
> diff --git a/arch/arm/boot/dts/r9a06g032-rzn1d400-eb.dts b/arch/arm/boot/dts/r9a06g032-rzn1d400-eb.dts
> new file mode 100644
> index 000000000000..e986b6d2fd6f
> --- /dev/null
> +++ b/arch/arm/boot/dts/r9a06g032-rzn1d400-eb.dts
> @@ -0,0 +1,92 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Device Tree Source for the RZN1D-EB Board
> + *
> + * Copyright (C) 2023 Schneider-Electric
> + *
> + */
> +
> +#include "r9a06g032-rzn1d400-db.dts"
> +
> +/ {
> + model = "RZN1D-EB Board";
> + compatible = "renesas,rzn1d400-eb", "renesas,r9a06g032";
> +};
> +
> +&mii_conv2 {
> + renesas,miic-input = <MIIC_SWITCH_PORTD>;
> + status = "okay";
> +};
> +
> +&mii_conv3 {
> + renesas,miic-input = <MIIC_SWITCH_PORTC>;
> + status = "okay";
> +};
> +
> +&pinctrl{
> + pins_eth1: pins_eth1 {
No underscores in node names, unless you override existing node with
such underscore.
Best regards,
Krzysztof
