Hi Tomi,
Thank you for the patch.
On Tue, Feb 07, 2023 at 02:44:40PM +0200, Tomi Valkeinen wrote:
> From: Tomi Valkeinen <tomi.valkeinen+renesas@xxxxxxxxxxxxxxxx>
>
> Print underrun interrupts with ratelimited print.
>
> Note that we don't enable the underrun interrupt. If we have underruns,
> we don't want to get flooded with interrupts about them. It's enough to
> see that an underrun happened at the end of a frame.
>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@xxxxxxxxxxxxxxxx>
> ---
> drivers/media/platform/renesas/vsp1/vsp1_drv.c | 8 +++++++-
> drivers/media/platform/renesas/vsp1/vsp1_regs.h | 2 ++
> 2 files changed, 9 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/media/platform/renesas/vsp1/vsp1_drv.c b/drivers/media/platform/renesas/vsp1/vsp1_drv.c
> index 5710152d6511..b24437b5b945 100644
> --- a/drivers/media/platform/renesas/vsp1/vsp1_drv.c
> +++ b/drivers/media/platform/renesas/vsp1/vsp1_drv.c
> @@ -45,7 +45,8 @@
>
> static irqreturn_t vsp1_irq_handler(int irq, void *data)
> {
> - u32 mask = VI6_WPF_IRQ_STA_DFE | VI6_WPF_IRQ_STA_FRE;
> + u32 mask = VI6_WPF_IRQ_STA_DFE | VI6_WPF_IRQ_STA_FRE |
> + VI6_WPF_IRQ_STA_UND;
> struct vsp1_device *vsp1 = data;
> irqreturn_t ret = IRQ_NONE;
> unsigned int i;
> @@ -60,6 +61,11 @@ static irqreturn_t vsp1_irq_handler(int irq, void *data)
> status = vsp1_read(vsp1, VI6_WPF_IRQ_STA(i));
> vsp1_write(vsp1, VI6_WPF_IRQ_STA(i), ~status & mask);
>
> + if (status & VI6_WPF_IRQ_STA_UND) {
> + dev_warn_ratelimited(vsp1->dev,
> + "Underrun occurred at WPF%u\n", i);
> + }
You could drop the braces.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
> +
> if (status & VI6_WPF_IRQ_STA_DFE) {
> vsp1_pipeline_frame_end(wpf->entity.pipe);
> ret = IRQ_HANDLED;
> diff --git a/drivers/media/platform/renesas/vsp1/vsp1_regs.h b/drivers/media/platform/renesas/vsp1/vsp1_regs.h
> index d94343ae57a1..7eca82e0ba7e 100644
> --- a/drivers/media/platform/renesas/vsp1/vsp1_regs.h
> +++ b/drivers/media/platform/renesas/vsp1/vsp1_regs.h
> @@ -32,10 +32,12 @@
> #define VI6_STATUS_SYS_ACT(n) BIT((n) + 8)
>
> #define VI6_WPF_IRQ_ENB(n) (0x0048 + (n) * 12)
> +#define VI6_WPF_IRQ_ENB_UNDE BIT(16)
> #define VI6_WPF_IRQ_ENB_DFEE BIT(1)
> #define VI6_WPF_IRQ_ENB_FREE BIT(0)
>
> #define VI6_WPF_IRQ_STA(n) (0x004c + (n) * 12)
> +#define VI6_WPF_IRQ_STA_UND BIT(16)
> #define VI6_WPF_IRQ_STA_DFE BIT(1)
> #define VI6_WPF_IRQ_STA_FRE BIT(0)
>
--
Regards,
Laurent Pinchart
