On Thu, Feb 2, 2023 at 9:36 AM Maxim Kiselev <bigunclemax@xxxxxxxxx> wrote: > > Hi Saravana, > > > Can you try the patch at the end of this email under these > > configurations and tell me which ones fail vs pass? I don't need logs > > I did these tests and here is the results: Did you hand edit the In-Reply-To: in the header? Because in the thread you are reply to the wrong email, but the context in your email seems to be from the right email. For example, see how your reply isn't under the email you are replying to in this thread overview: https://lore.kernel.org/lkml/20230127001141.407071-1-saravanak@xxxxxxxxxx/#r > 1. On top of this series - Not works > 2. Without this series - Works > 3. On top of the series with the fwnode_dev_initialized() deleted - Not works > 4. Without this series, with the fwnode_dev_initialized() deleted - Works > > So your nvmem/core.c patch helps only when it is applied without the series. > But despite the fact that this helps to avoid getting stuck at probing > my ethernet device, there is still regression. > > When the ethernet module is loaded it takes a lot of time to drop dependency > from the nvmem-cell with mac address. > > Please look at the kernel logs below. The kernel logs below really aren't that useful for me in their current state. See more below. ---8<---- <snip> --->8---- > P.S. Your nvmem patch definitely helps to avoid a device probe stuck > but look like it is not best way to solve a problem which we discussed > in the MTD thread. > > P.P.S. Also I don't know why your nvmem-cell patch doesn't help when it was > applied on top of this series. Maybe I missed something. Yeah, I'm not too sure if the test was done correctly. You also didn't answer my question about the dts from my earlier email. https://lore.kernel.org/lkml/CAGETcx8FpmbaRm2CCwqt3BRBpgbogwP5gNB+iA5OEtuxWVTNLA@xxxxxxxxxxxxxx/#t So, can you please retest config 1 with all pr_debug and dev_dbg in drivers/core/base.c changed to the _info variants? And then share the kernel log from the beginning of boot? Maybe attach it to the email so it doesn't get word wrapped by your email client. And please point me to the .dts that corresponds to your board. Without that, I can't debug much. Thanks, Saravana
