Re: [PATCH v2 08/11] driver core: fw_devlink: Make cycle detection more robust

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Jan 27, 2023 at 1:43 AM Andy Shevchenko
<andriy.shevchenko@xxxxxxxxxxxxxxx> wrote:
>
> On Thu, Jan 26, 2023 at 04:11:35PM -0800, Saravana Kannan wrote:
> > fw_devlink could only detect a single and simple cycle because it relied
> > mainly on device link cycle detection code that only checked for cycles
> > between devices. The expectation was that the firmware wouldn't have
> > complicated cycles and multiple cycles between devices. That expectation
> > has been proven to be wrong.
> >
> > For example, fw_devlink could handle:
> >
> > +-+        +-+
> > |A+------> |B+
> > +-+        +++
> >  ^          |
> >  |          |
> >  +----------+
> >
> > But it couldn't handle even something as "simple" as:
> >
> >  +---------------------+
> >  |                     |
> >  v                     |
> > +-+        +-+        +++
> > |A+------> |B+------> |C|
> > +-+        +++        +-+
> >  ^          |
> >  |          |
> >  +----------+
> >
> > But firmware has even more complicated cycles like:
> >
> >     +---------------------+
> >     |                     |
> >     v                     |
> >    +-+       +---+       +++
> > +--+A+------>| B +-----> |C|<--+
> > |  +-+       ++--+       +++   |
> > |   ^         | ^         |    |
> > |   |         | |         |    |
> > |   +---------+ +---------+    |
> > |                              |
> > +------------------------------+
> >
> > And this is without including parent child dependencies or nodes in the
> > cycle that are just firmware nodes that'll never have a struct device
> > created for them.
> >
> > The proper way to treat these devices it to not force any probe ordering
> > between them, while still enforce dependencies between node in the
> > cycles (A, B and C) and their consumers.
> >
> > So this patch goes all out and just deals with all types of cycles. It
> > does this by:
> >
> > 1. Following dependencies across device links, parent-child and fwnode
> >    links.
> > 2. When it find cycles, it mark the device links and fwnode links as
> >    such instead of just deleting them or making the indistinguishable
> >    from proxy SYNC_STATE_ONLY device links.
> >
> > This way, when new nodes get added, we can immediately find and mark any
> > new cycles whether the new node is a device or firmware node.
>
> ...
>
> > + * Check if @sup_handle or any of its ancestors or suppliers direct/indirectly
> > + * depend on @con.  This function can detect multiple cyles between @sup_handle
>
> A single space is enough.
>
> > + * and @con. When such dependency cycles are found, convert all device links
> > + * created solely by fw_devlink into SYNC_STATE_ONLY device links.  Also, mark
>
> Ditto.
>
> > + * all fwnode links in the cycle with FWLINK_FLAG_CYCLE so that when they are
> > + * converted into a device link in the future, they are created as
> > + * SYNC_STATE_ONLY device links.  This is the equivalent of doing
>
> Ditto.

Lol, you are the king of nit picks :) I don't know how you even notice
these :) I don't like the double spacing either, but as Geert pointed
out, vim inserts them when I use it to auto word-wrap comment blocks.
I'll try to address them as I find them, but I'm not going to send out
revisions of patches just for double spaces.

>
> > + * fw_devlink=permissive just between the devices in the cycle. We need to do
> > + * this because, at this point, fw_devlink can't tell which of these
> > + * dependencies is not a real dependency.
> > + *
> > + * Return true if one or more cycles were found. Otherwise, return false.
>
> Return:

I'm following the rest of the function docs in this file.

>
> (you may run `kernel-doc -v ...` to see all warnings)

Hmmm I ran it on the patch file and it didn't give me anything useful.
Running it on the whole file is just a lot of lines to dig through.

>
> ...
>
> > +static bool __fw_devlink_relax_cycles(struct device *con,
> > +                              struct fwnode_handle *sup_handle)
> > +{
> > +     struct fwnode_link *link;
> > +     struct device_link *dev_link;
>
> > +     struct device *sup_dev = NULL, *par_dev = NULL;
>
> You can put it the first line since it's long enough.

Wait, is that a style guideline to have the longer lines first?

> But why do you need sup_dev assignment?

Defensive programming I suppose. I can see this function being
refactored in the future where a goto out; is inserted before sup_dev
is assigned. And then the put_device(sup_dev) at "out" will end up
operating on some junk value and causing memory corruption.

>
> > +     bool ret = false;
> > +
> > +     if (!sup_handle)
> > +             return false;
> > +
> > +     /*
> > +      * We aren't trying to find all cycles. Just a cycle between con and
> > +      * sup_handle.
> > +      */
> > +     if (sup_handle->flags & FWNODE_FLAG_VISITED)
> > +             return false;
> > +
> > +     sup_handle->flags |= FWNODE_FLAG_VISITED;
>
> > +     sup_dev = get_dev_from_fwnode(sup_handle);
> > +
>
> I would put it closer to the condition:
>
> > +     /* Termination condition. */
> > +     if (sup_dev == con) {
>
>         /* Get supplier device and check for termination condition */
>         sup_dev = get_dev_from_fwnode(sup_handle);
>         if (sup_dev == con) {

I put it the way it is because sup_dev is used for more than just
checking for termination condition.

>
> > +             ret = true;
> > +             goto out;
> > +     }
> > +
> > +     /*
> > +      * If sup_dev is bound to a driver and @con hasn't started binding to
> > +      * a driver, @sup_dev can't be a consumer of @con.  So, no need to
>
> sup_dev or @sup_dev? What's the difference? Should you spell one of them
> in full?

Probably copy-pasta from a function doc. I'll make it sup_dev.

>
> > +      * check further.
> > +      */
> > +     if (sup_dev && sup_dev->links.status ==  DL_DEV_DRIVER_BOUND &&
>
> As in the comment above, the single space is enough.
>
> > +         con->links.status == DL_DEV_NO_DRIVER) {
> > +             ret = false;
> > +             goto out;
> > +     }
> > +
> > +     list_for_each_entry(link, &sup_handle->suppliers, c_hook) {
> > +             if (__fw_devlink_relax_cycles(con, link->supplier)) {
> > +                     __fwnode_link_cycle(link);
> > +                     ret = true;
> > +             }
> > +     }
> > +
> > +     /*
> > +      * Give priority to device parent over fwnode parent to account for any
> > +      * quirks in how fwnodes are converted to devices.
> > +      */
>
> > +     if (sup_dev) {
> > +             par_dev = sup_dev->parent;
> > +             get_device(par_dev);
> > +     } else {
> > +             par_dev = fwnode_get_next_parent_dev(sup_handle);
> > +     }
>
>         if (sup_dev)
>                 par_dev = get_device(sup_dev->parent);
>         else
>                 par_dev = fwnode_get_next_parent_dev(sup_handle);

Ack, thanks. Makes it nicer.

>
> > +     if (par_dev)
> > +             ret |= __fw_devlink_relax_cycles(con, par_dev->fwnode);
>
> Instead I would rather do a similar pattern of the ret assignment as elsewhere
> in the function.
>
>         if (par_dev && __fw_devlink_relax_cycles(con, par_dev->fwnode))
>                 ret = true;

Ack. Good suggestion!

>
> > +     if (!sup_dev)
> > +             goto out;
> > +
> > +     list_for_each_entry(dev_link, &sup_dev->links.suppliers, c_node) {
> > +             /*
> > +              * Ignore a SYNC_STATE_ONLY flag only if it wasn't marked as a
> > +              * such due to a cycle.
> > +              */
> > +             if (device_link_flag_is_sync_state_only(dev_link->flags) &&
> > +                 !(dev_link->flags & DL_FLAG_CYCLE))
> > +                     continue;
> > +
> > +             if (__fw_devlink_relax_cycles(con,
> > +                                           dev_link->supplier->fwnode)) {
>
> Keep it on one line.

It'll make it > 80. Is this some recent change about allowing > 80
cols? I'm leaving it as is for now.


> > +                     fw_devlink_relax_link(dev_link);
> > +                     dev_link->flags |= DL_FLAG_CYCLE;
> > +                     ret = true;
> > +             }
> > +     }
> > +
> > +out:
> > +     sup_handle->flags &= ~FWNODE_FLAG_VISITED;
> > +     put_device(sup_dev);
> > +     put_device(par_dev);
> > +     return ret;
> > +}
>
> --
> With Best Regards,
> Andy Shevchenko
>
>
> --
> To unsubscribe from this group and stop receiving emails from it, send an email to kernel-team+unsubscribe@xxxxxxxxxxx.
>



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux