Re: [PATCH net v2] net: ethernet: renesas: rswitch: Fix ethernet-ports handling

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 1/19/2023 4:19 PM, Yoshihiro Shimoda wrote:
> If one of ports in the ethernet-ports was disabled, this driver
> failed to probe all ports. So, fix it.
> 
> Fixes: 3590918b5d07 ("net: ethernet: renesas: Add support for "Ethernet Switch"")
> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
> Reviewed-by: Jiri Pirko <jiri@xxxxxxxxxx>
> ---
>  The checkpatch.pl reports the following ERROR:
> 
>     Macros with multiple statements should be enclosed in a do - while loop
> 
>  However, include/linux/cpufreq.h has similar macros and the same ERROR
>  happened. So, I assume that the ERROR can be ignored.
> 

Yea, the checkpatch here wants you to do/while but thats not possible
with the macro construction you have here.

>  Changes from v1:
>  - Rename rswitch_for_each_enabled_port_reverse() with "_continue_reverse".
>  - Add Reviewed-by. (Thanks, Jiri!)
> 
>  drivers/net/ethernet/renesas/rswitch.c | 22 +++++++++++++---------
>  drivers/net/ethernet/renesas/rswitch.h | 12 ++++++++++++
>  2 files changed, 25 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/net/ethernet/renesas/rswitch.c b/drivers/net/ethernet/renesas/rswitch.c
> index 6441892636db..2370c7797a0a 100644
> --- a/drivers/net/ethernet/renesas/rswitch.c
> +++ b/drivers/net/ethernet/renesas/rswitch.c
> @@ -1074,8 +1074,11 @@ static struct device_node *rswitch_get_port_node(struct rswitch_device *rdev)
>  			port = NULL;
>  			goto out;
>  		}
> -		if (index == rdev->etha->index)
> +		if (index == rdev->etha->index) {
> +			if (!of_device_is_available(port))
> +				port = NULL;
>  			break;
> +		}
>  	}
>  
>  out:
> @@ -1106,7 +1109,7 @@ static int rswitch_etha_get_params(struct rswitch_device *rdev)
>  
>  	port = rswitch_get_port_node(rdev);
>  	if (!port)
> -		return -ENODEV;
> +		return 0;	/* ignored */
>  
>  	err = of_get_phy_mode(port, &rdev->etha->phy_interface);
>  	of_node_put(port);
> @@ -1324,13 +1327,13 @@ static int rswitch_ether_port_init_all(struct rswitch_private *priv)
>  {
>  	int i, err;
>  
> -	for (i = 0; i < RSWITCH_NUM_PORTS; i++) {
> +	rswitch_for_each_enabled_port(priv, i) {
>  		err = rswitch_ether_port_init_one(priv->rdev[i]);
>  		if (err)
>  			goto err_init_one;
>  	}
>  
> -	for (i = 0; i < RSWITCH_NUM_PORTS; i++) {
> +	rswitch_for_each_enabled_port(priv, i) {
>  		err = rswitch_serdes_init(priv->rdev[i]);
>  		if (err)
>  			goto err_serdes;
> @@ -1339,12 +1342,12 @@ static int rswitch_ether_port_init_all(struct rswitch_private *priv)
>  	return 0;
>  
>  err_serdes:
> -	for (i--; i >= 0; i--)
> +	rswitch_for_each_enabled_port_continue_reverse(priv, i)
>  		rswitch_serdes_deinit(priv->rdev[i]);
>  	i = RSWITCH_NUM_PORTS;
>  
>  err_init_one:
> -	for (i--; i >= 0; i--)
> +	rswitch_for_each_enabled_port_continue_reverse(priv, i)
>  		rswitch_ether_port_deinit_one(priv->rdev[i]);
>  
>  	return err;
> @@ -1608,6 +1611,7 @@ static int rswitch_device_alloc(struct rswitch_private *priv, int index)
>  	netif_napi_add(ndev, &rdev->napi, rswitch_poll);
>  
>  	port = rswitch_get_port_node(rdev);
> +	rdev->disabled = !port;
>  	err = of_get_ethdev_address(port, ndev);
>  	of_node_put(port);
>  	if (err) {
> @@ -1707,16 +1711,16 @@ static int rswitch_init(struct rswitch_private *priv)
>  	if (err)
>  		goto err_ether_port_init_all;
>  
> -	for (i = 0; i < RSWITCH_NUM_PORTS; i++) {
> +	rswitch_for_each_enabled_port(priv, i) {
>  		err = register_netdev(priv->rdev[i]->ndev);
>  		if (err) {
> -			for (i--; i >= 0; i--)
> +			rswitch_for_each_enabled_port_continue_reverse(priv, i)
>  				unregister_netdev(priv->rdev[i]->ndev);
>  			goto err_register_netdev;
>  		}
>  	}
>  
> -	for (i = 0; i < RSWITCH_NUM_PORTS; i++)
> +	rswitch_for_each_enabled_port(priv, i)
>  		netdev_info(priv->rdev[i]->ndev, "MAC address %pM\n",
>  			    priv->rdev[i]->ndev->dev_addr);
>  
> diff --git a/drivers/net/ethernet/renesas/rswitch.h b/drivers/net/ethernet/renesas/rswitch.h
> index edbdd1b98d3d..49efb0f31c77 100644
> --- a/drivers/net/ethernet/renesas/rswitch.h
> +++ b/drivers/net/ethernet/renesas/rswitch.h
> @@ -13,6 +13,17 @@
>  #define RSWITCH_MAX_NUM_QUEUES	128
>  
>  #define RSWITCH_NUM_PORTS	3
> +#define rswitch_for_each_enabled_port(priv, i)		\
> +	for (i = 0; i < RSWITCH_NUM_PORTS; i++)		\
> +		if (priv->rdev[i]->disabled)		\
> +			continue;			\
> +		else
> +
> +#define rswitch_for_each_enabled_port_continue_reverse(priv, i)	\
> +	for (i--; i >= 0; i--)					\
> +		if (priv->rdev[i]->disabled)			\
> +			continue;				\
> +		else
>  

These macros are the ones that violate the checkpatch.pl, but I don't
think you can implement them another way. They behave like for loops
with some continue block but they'll properly handle a single statement
or multi statement lines. Ok.

Reviewed-by: Jacob Keller <jacob.e.keller@xxxxxxxxx>

>  #define TX_RING_SIZE		1024
>  #define RX_RING_SIZE		1024
> @@ -938,6 +949,7 @@ struct rswitch_device {
>  	struct rswitch_gwca_queue *tx_queue;
>  	struct rswitch_gwca_queue *rx_queue;
>  	u8 ts_tag;
> +	bool disabled;
>  
>  	int port;
>  	struct rswitch_etha *etha;



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux