[PATCH net-next 03/12] net: nixge: Separate C22 and C45 transactions

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Andrew Lunn <andrew@xxxxxxx>

The nixge MDIO bus driver can perform both C22 and C45 transfers.
Create separate functions for each and register the C45 versions using
the new API calls where appropriate.

Signed-off-by: Andrew Lunn <andrew@xxxxxxx>
Signed-off-by: Michael Walle <michael@xxxxxxxx>
---
 drivers/net/ethernet/ni/nixge.c | 141 ++++++++++++++++++++++++----------------
 1 file changed, 85 insertions(+), 56 deletions(-)

diff --git a/drivers/net/ethernet/ni/nixge.c b/drivers/net/ethernet/ni/nixge.c
index 62320be4de5a..56e02cba0b8a 100644
--- a/drivers/net/ethernet/ni/nixge.c
+++ b/drivers/net/ethernet/ni/nixge.c
@@ -1081,40 +1081,59 @@ static const struct ethtool_ops nixge_ethtool_ops = {
 	.get_link		= ethtool_op_get_link,
 };
 
-static int nixge_mdio_read(struct mii_bus *bus, int phy_id, int reg)
+static int nixge_mdio_read_c22(struct mii_bus *bus, int phy_id, int reg)
 {
 	struct nixge_priv *priv = bus->priv;
 	u32 status, tmp;
 	int err;
 	u16 device;
 
-	if (reg & MII_ADDR_C45) {
-		device = (reg >> 16) & 0x1f;
+	device = reg & 0x1f;
 
-		nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_ADDR, reg & 0xffff);
+	tmp = NIXGE_MDIO_CLAUSE22 | NIXGE_MDIO_OP(NIXGE_MDIO_C22_READ) |
+	      NIXGE_MDIO_ADDR(phy_id) | NIXGE_MDIO_MMD(device);
 
-		tmp = NIXGE_MDIO_CLAUSE45 | NIXGE_MDIO_OP(NIXGE_MDIO_OP_ADDRESS)
-			| NIXGE_MDIO_ADDR(phy_id) | NIXGE_MDIO_MMD(device);
+	nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_OP, tmp);
+	nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_CTRL, 1);
 
-		nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_OP, tmp);
-		nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_CTRL, 1);
+	err = nixge_ctrl_poll_timeout(priv, NIXGE_REG_MDIO_CTRL, status,
+				      !status, 10, 1000);
+	if (err) {
+		dev_err(priv->dev, "timeout setting read command");
+		return err;
+	}
 
-		err = nixge_ctrl_poll_timeout(priv, NIXGE_REG_MDIO_CTRL, status,
-					      !status, 10, 1000);
-		if (err) {
-			dev_err(priv->dev, "timeout setting address");
-			return err;
-		}
+	status = nixge_ctrl_read_reg(priv, NIXGE_REG_MDIO_DATA);
 
-		tmp = NIXGE_MDIO_CLAUSE45 | NIXGE_MDIO_OP(NIXGE_MDIO_C45_READ) |
-			NIXGE_MDIO_ADDR(phy_id) | NIXGE_MDIO_MMD(device);
-	} else {
-		device = reg & 0x1f;
+	return status;
+}
 
-		tmp = NIXGE_MDIO_CLAUSE22 | NIXGE_MDIO_OP(NIXGE_MDIO_C22_READ) |
-			NIXGE_MDIO_ADDR(phy_id) | NIXGE_MDIO_MMD(device);
+static int nixge_mdio_read_c45(struct mii_bus *bus, int phy_id, int device,
+			       int reg)
+{
+	struct nixge_priv *priv = bus->priv;
+	u32 status, tmp;
+	int err;
+
+	nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_ADDR, reg & 0xffff);
+
+	tmp = NIXGE_MDIO_CLAUSE45 |
+	      NIXGE_MDIO_OP(NIXGE_MDIO_OP_ADDRESS) |
+	      NIXGE_MDIO_ADDR(phy_id) | NIXGE_MDIO_MMD(device);
+
+	nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_OP, tmp);
+	nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_CTRL, 1);
+
+	err = nixge_ctrl_poll_timeout(priv, NIXGE_REG_MDIO_CTRL, status,
+				      !status, 10, 1000);
+	if (err) {
+		dev_err(priv->dev, "timeout setting address");
+		return err;
 	}
 
+	tmp = NIXGE_MDIO_CLAUSE45 | NIXGE_MDIO_OP(NIXGE_MDIO_C45_READ) |
+	      NIXGE_MDIO_ADDR(phy_id) | NIXGE_MDIO_MMD(device);
+
 	nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_OP, tmp);
 	nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_CTRL, 1);
 
@@ -1130,57 +1149,65 @@ static int nixge_mdio_read(struct mii_bus *bus, int phy_id, int reg)
 	return status;
 }
 
-static int nixge_mdio_write(struct mii_bus *bus, int phy_id, int reg, u16 val)
+static int nixge_mdio_write_c22(struct mii_bus *bus, int phy_id, int reg,
+				u16 val)
 {
 	struct nixge_priv *priv = bus->priv;
 	u32 status, tmp;
 	u16 device;
 	int err;
 
-	if (reg & MII_ADDR_C45) {
-		device = (reg >> 16) & 0x1f;
+	device = reg & 0x1f;
 
-		nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_ADDR, reg & 0xffff);
+	tmp = NIXGE_MDIO_CLAUSE22 | NIXGE_MDIO_OP(NIXGE_MDIO_C22_WRITE) |
+	      NIXGE_MDIO_ADDR(phy_id) | NIXGE_MDIO_MMD(device);
 
-		tmp = NIXGE_MDIO_CLAUSE45 | NIXGE_MDIO_OP(NIXGE_MDIO_OP_ADDRESS)
-			| NIXGE_MDIO_ADDR(phy_id) | NIXGE_MDIO_MMD(device);
+	nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_DATA, val);
+	nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_OP, tmp);
+	nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_CTRL, 1);
 
-		nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_OP, tmp);
-		nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_CTRL, 1);
+	err = nixge_ctrl_poll_timeout(priv, NIXGE_REG_MDIO_CTRL, status,
+				      !status, 10, 1000);
+	if (err)
+		dev_err(priv->dev, "timeout setting write command");
 
-		err = nixge_ctrl_poll_timeout(priv, NIXGE_REG_MDIO_CTRL, status,
-					      !status, 10, 1000);
-		if (err) {
-			dev_err(priv->dev, "timeout setting address");
-			return err;
-		}
+	return err;
+}
 
-		tmp = NIXGE_MDIO_CLAUSE45 | NIXGE_MDIO_OP(NIXGE_MDIO_C45_WRITE)
-			| NIXGE_MDIO_ADDR(phy_id) | NIXGE_MDIO_MMD(device);
+static int nixge_mdio_write_c45(struct mii_bus *bus, int phy_id,
+				int device, int reg, u16 val)
+{
+	struct nixge_priv *priv = bus->priv;
+	u32 status, tmp;
+	int err;
 
-		nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_DATA, val);
-		nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_OP, tmp);
-		err = nixge_ctrl_poll_timeout(priv, NIXGE_REG_MDIO_CTRL, status,
-					      !status, 10, 1000);
-		if (err)
-			dev_err(priv->dev, "timeout setting write command");
-	} else {
-		device = reg & 0x1f;
+	nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_ADDR, reg & 0xffff);
 
-		tmp = NIXGE_MDIO_CLAUSE22 |
-			NIXGE_MDIO_OP(NIXGE_MDIO_C22_WRITE) |
-			NIXGE_MDIO_ADDR(phy_id) | NIXGE_MDIO_MMD(device);
+	tmp = NIXGE_MDIO_CLAUSE45 |
+	      NIXGE_MDIO_OP(NIXGE_MDIO_OP_ADDRESS) |
+	      NIXGE_MDIO_ADDR(phy_id) | NIXGE_MDIO_MMD(device);
 
-		nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_DATA, val);
-		nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_OP, tmp);
-		nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_CTRL, 1);
+	nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_OP, tmp);
+	nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_CTRL, 1);
 
-		err = nixge_ctrl_poll_timeout(priv, NIXGE_REG_MDIO_CTRL, status,
-					      !status, 10, 1000);
-		if (err)
-			dev_err(priv->dev, "timeout setting write command");
+	err = nixge_ctrl_poll_timeout(priv, NIXGE_REG_MDIO_CTRL, status,
+				      !status, 10, 1000);
+	if (err) {
+		dev_err(priv->dev, "timeout setting address");
+		return err;
 	}
 
+	tmp = NIXGE_MDIO_CLAUSE45 | NIXGE_MDIO_OP(NIXGE_MDIO_C45_WRITE) |
+	      NIXGE_MDIO_ADDR(phy_id) | NIXGE_MDIO_MMD(device);
+
+	nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_DATA, val);
+	nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_OP, tmp);
+
+	err = nixge_ctrl_poll_timeout(priv, NIXGE_REG_MDIO_CTRL, status,
+				      !status, 10, 1000);
+	if (err)
+		dev_err(priv->dev, "timeout setting write command");
+
 	return err;
 }
 
@@ -1195,8 +1222,10 @@ static int nixge_mdio_setup(struct nixge_priv *priv, struct device_node *np)
 	snprintf(bus->id, MII_BUS_ID_SIZE, "%s-mii", dev_name(priv->dev));
 	bus->priv = priv;
 	bus->name = "nixge_mii_bus";
-	bus->read = nixge_mdio_read;
-	bus->write = nixge_mdio_write;
+	bus->read = nixge_mdio_read_c22;
+	bus->write = nixge_mdio_write_c22;
+	bus->read_c45 = nixge_mdio_read_c45;
+	bus->write_c45 = nixge_mdio_write_c45;
 	bus->parent = priv->dev;
 
 	priv->mii_bus = bus;

-- 
2.30.2



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux