The rzn1-gmac instance is connected to a PCS (MIIC). In order to use this pcs, add support in the sttmac driver to set a generic phylink pcs device instead of the xpcs only. Moreover, it adds support to provide a phylink pcs device from the stmmac platform data and use it with the driver. It also adds the bindings and the new rzn1-gmac driver that retrieve this pcs from the device-tree. Clément Léger (6): net: stmmac: add support to use a generic phylink_pcs as PCS net: stmmac: add support to provide pcs from platform data net: stmmac: start phylink before setting up hardware dt-bindings: net: renesas,rzn1-gmac: Document RZ/N1 GMAC support net: stmmac: add support for RZ/N1 GMAC ARM: dts: r9a06g032: describe GMAC1 .../bindings/net/renesas,rzn1-gmac.yaml | 71 +++++++++++ arch/arm/boot/dts/r9a06g032.dtsi | 18 +++ drivers/net/ethernet/stmicro/stmmac/Kconfig | 11 ++ drivers/net/ethernet/stmicro/stmmac/Makefile | 1 + drivers/net/ethernet/stmicro/stmmac/common.h | 2 + .../net/ethernet/stmicro/stmmac/dwmac-rzn1.c | 113 ++++++++++++++++++ .../net/ethernet/stmicro/stmmac/stmmac_main.c | 15 ++- .../net/ethernet/stmicro/stmmac/stmmac_mdio.c | 1 + include/linux/stmmac.h | 1 + 9 files changed, 228 insertions(+), 5 deletions(-) create mode 100644 Documentation/devicetree/bindings/net/renesas,rzn1-gmac.yaml create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-rzn1.c -- 2.39.0
