Re: [PATCH v2 3/4] clk: rs9: Support device specific dif bit calculation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 1/10/23 14:22, Alexander Stein wrote:
Hi Marek,

Hi,

thanks for your feedback.

Am Dienstag, 10. Januar 2023, 11:31:49 CET schrieb Marek Vasut:
On 1/10/23 11:00, Alexander Stein wrote:

[...]

   static int rs9_get_output_config(struct rs9_driver_data *rs9, int idx)
   {
struct i2c_client *client = rs9->client;

+	u8 dif = rs9_calc_dif(rs9, idx);

   	unsigned char name[5] = "DIF0";
   	struct device_node *np;
   	int ret;
   	u32 sr;
   	
   	/* Set defaults */

-	rs9->clk_dif_sr &= ~RS9_REG_SR_DIF_MASK(idx);

Are you sure this line ^ should be dropped ?
Shouldn't the bitfield be cleared first and modified second?

Well, I had in my mind that this function is called upon probe with clk_dif_sr
being cleared anyway, so this does essentially nothing. And the DIF bit is set
unconditionally, so what is the point of masking it before?

Good point, but then, what's the point of ORRing either ? Just do a plain assignment.



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux