Power supplies for the ports can be controlled per port depending on the
hardware design. Support per-port supplies in the DT bindings, mutually
exclusive with the global supply.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
Reviewed-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
---
Changes since v2:
- Make maxim,gpio-poc and port[0-3]-poc-supply mutually exclusive
Changes since v1:
- Simplify mutual exclusion condition
---
.../bindings/media/i2c/maxim,max9286.yaml | 35 +++++++++++++------
1 file changed, 25 insertions(+), 10 deletions(-)
diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
index 90315e217003..4f28690eabcd 100644
--- a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
@@ -39,7 +39,7 @@ properties:
maxItems: 1
poc-supply:
- description: Regulator providing Power over Coax to the cameras
+ description: Regulator providing Power over Coax to all the ports
enable-gpios:
description: GPIO connected to the \#PWDN pin with inverted polarity
@@ -182,21 +182,36 @@ properties:
additionalProperties: false
+patternProperties:
+ "^port[0-3]-poc-supply$":
+ description: Regulator providing Power over Coax for a particular port
+
required:
- compatible
- reg
- ports
- i2c-mux
-# If 'maxim,gpio-poc' is present, then 'poc-supply' and 'gpio-controller'
-# are not allowed.
-if:
- required:
- - maxim,gpio-poc
-then:
- properties:
- poc-supply: false
- gpio-controller: false
+allOf:
+ # Only one way of specifying power supplies is allowed: 'maxim,gpio-poc',
+ # 'poc-supply' or per-port poc-supply. Additionally, if 'maxim,gpio-poc' is
+ # present, then 'gpio-controller' isn't allowed.
+ - if:
+ required:
+ - maxim,gpio-poc
+ then:
+ properties:
+ poc-supply: false
+ gpio-controller: false
+ patternProperties:
+ "^port[0-3]-poc-supply$": false
+
+ - if:
+ required:
+ - poc-supply
+ then:
+ patternProperties:
+ "^port[0-3]-poc-supply$": false
additionalProperties: false
--
Regards,
Laurent Pinchart
