RZ/G2L General PWM Timer (GPT) composed of 8 channels with 32-bit timer
(GPT32E). It supports the following functions
* 32 bits × 8 channels
* Up-counting or down-counting (saw waves) or up/down-counting
(triangle waves) for each counter.
* Clock sources independently selectable for each channel
* Two I/O pins per channel
* Two output compare/input capture registers per channel
* For the two output compare/input capture registers of each channel,
four registers are provided as buffer registers and are capable of
operating as comparison registers when buffering is not in use.
* In output compare operation, buffer switching can be at crests or
troughs, enabling the generation of laterally asymmetric PWM waveforms.
* Registers for setting up frame cycles in each channel (with capability
for generating interrupts at overflow or underflow)
* Generation of dead times in PWM operation
* Synchronous starting, stopping and clearing counters for arbitrary
channels
* Starting, stopping, clearing and up/down counters in response to input
level comparison
* Starting, clearing, stopping and up/down counters in response to a
maximum of four external triggers
* Output pin disable function by dead time error and detected
short-circuits between output pins
* A/D converter start triggers can be generated (GPT32E0 to GPT32E3)
* Enables the noise filter for input capture and external trigger
operation
This patch series aims to add basic pwm support for RZ/G2L GPT driver
by creating separate logical channels for each IOs.
v11->v12:
* Added return code for get_state()
* Cache duty cycle/prescale as the driver cannot read the current duty
cycle/prescale from the hardware if the hardware is disabled. Cache the
last programmed duty cycle/prescale value to return in that case.
* Updated rzg2l_gpt_enable to enable the clocks.
* Updated rzg2l_gpt_disable to disable the clocks.
* Updated rzg2l_gpt_config() to cache duty cucle/prescale value
* Updated rzg2l_gpt_get_state to use cached value of duty cycle/prescale,If the PWM
is disabled.
* Simplified rzg2l_gpt_apply()
* Added comments in rzg2l_gpt_reset_assert_pm_disable()
v10->v11:
* Used bitmap_zero for initializing bitmap varable.
* Fixed clock imbalance during remove for the case bootloader turning
on PWM and module unload is called just after the boot.
* Fixed over flow condition in get_state() for a prescale value of 2 & more.
* Improved rzg2l_gpt_cntr_need_stop() based on prescale as it is the
only runtime variable.
* Added array for Cache variables state_period and prescale
* Probe caches the prescale value set by the bootloader.
* Updated rzg2l_gpt_config() to make use of array variables.
v9->v10:
* Updated the example gpt4: pwm@10048400-> gpt: pwm@10048000
* Keep Rb tag from Rob as the above change is trivial one.
* Updated the error handling in probe(), clk_disable_unprepare called
on the error path.
* Removed ch_en array and started using bitmask instead.
v8->v9:
* Added Rb tag from Rob.
* deassert after devm_clk_get() to avoid reset stays deasserted,in case
clk_get() fails.
* Removed ch_offs from struct rzg2l_gpt_chip and use macro instead.
* Updated error handling in probe()
v7->v8:
* Removed Rb tags from Rob and Geert as it modelled as single GPT
device handling multiple channels.
* Updated description
* Updated interrupts and interrupt-names properties
* Updated binding example
* Modelled as single PWM device handling multiple channels
* Replaced shared reset->devm_reset_control_get_exclusive()
* Added PM runtime callbacks
* Updated PM handling and removed "pwm_enabled_by_bootloader" variable
* Replaced iowrite32->writel and ioread32->readl
* Updated prescale calculation
* Introduced rzg2l_gpt_is_ch_enabled for checking enable status on both
IO's
* Moved enable/disable output pins from config->enable/disable.
* Added rzg2l_gpt_cntr_need_stop() for caching prescalar/mode values.
v6->v7:
* Added the comment for cacheing rzg2l_gpt->state_period.
* Fixed boundary values for pv and dc.
* Added comment for modifying mode, prescaler, timer counter and buffer enable
registers.
* Fixed buffer overflow in get_state()
* Removed unnecessary assignment of state->period value in get_state().
* Fixed state->duty_cycle value in get_state().
* Added a limitation for disabling the channels, when both channels used
v5->v6:
* Updated macros RZG2L_GTIOR_GTIOB_OUT_HI_END_TOGGLE_CMP_MATCH and
RZG2L_GTIOR_GTIOB_OUT_LO_END_TOGGLE_CMP_MATCH with computation
involving FIELD_PREP macro.
* Removed struct rzg2l_gpt_phase and started using RZG2L_GTCCR macro
for duty_offset.
* replaced misnomer real_period->state_period.
* Added handling for values >= (1024 << 32) for both period
and duty cycle.
* Added comments for pwm {en,dis}abled by bootloader during probe.
v4->v5:
* Added Hardware manual details
* Replaced the comment GTCNT->Counter
* Removed the macros RZG2L_GPT_IO_PER_CHANNEL and chip.npwm directly
used in probe.
* Removed the unsed macro RZG2L_GTPR_MAX_VALUE
* Added driver prefix for the type name and the variable.
* Initialization of per_channel data moved from request->probe.
* Updated clr parameter for rzg2l_gpt_modify for Start count.
* Started using mutex and usage_count for handling shared
period and prescalar for the 2 channels.
* Updated the comment cycle->period.
* Removed clk_disable from rzg2l_gpt_reset_assert_pm_disable()
* Replaced pc->rzg2l_gpt.
* Updated prescale calculation.
* Moved pm_runtime_{get_sync,put} from {request,free}->{enable,disable}
* Removed platform_set_drvdata as it is unused
* Removed the variable pwm_enabled_by_bootloader
* Added dev_err_probe in various probe error path.
* Added an error message, if devm_pwmchip_add fails.
v3->v4:
* Changed the local variable type i from u16->u8 and prescaled_period_
cycles from u64->u32 in calculate_prescale().
* Replaced mul_u64_u64_div_u64()->mul_u64_u32_div()
* Dropped the comma after the sentinel.
* Add a variable to track pwm enabled by bootloader and added comments
in probe().
* Removed unnecessary rzg2l_gpt_reset_assert_pm_disable() from probe.
* Replaced devm_clk_get()->devm_clk_get_prepared()
* Removed devm_clk_get_optional_enabled()
v2->v3:
* Added Rb tag from Rob for the bindings.
* Updated limitation section
* Added prefix "RZG2L_" for all macros
* Modified prescale calculation
* Removed pwm_set_chip_data
* Updated comment related to modifying Mode and Prescaler
* Updated setting of prescale value in rzg2l_gpt_config()
* Removed else branch from rzg2l_gpt_get_state()
* removed the err label from rzg2l_gpt_apply()
* Added devm_clk_get_optional_enabled() to retain clk on status,
in case bootloader turns on the clk of pwm.
* Replaced devm_reset_control_get_exclusive->devm_reset_control_get_shared
as single reset shared between 8 channels.
V1->v2:
* Added '|' after 'description:' to preserve formatting.
* Removed description for pwm_cells as it is common property.
* Changed the reg size in example from 0xa4->0x100
* Added Rb tag from Geert for bindings.
* Added Limitations section
* dropped "_MASK" from the define names.
* used named initializer for struct phase
* Added gpt_pwm_device into a flexible array member in rzg2l_gpt_chip
* Revised the logic for prescale
* Added .get_state callback
* Improved error handling in rzg2l_gpt_apply
* Removed .remove callback
* Tested the driver with PWM_DEBUG enabled.
RFC->v1:
* Added Description in binding patch
* Removed comments from reg and clock
* replaced rzg2l_gpt_write_mask()->rzg2l_gpt_modify()
* Added rzg2l_gpt_read() and updated macros
* Removed dtsi patches, will send it separately
RFC:
* https://lore.kernel.org/linux-renesas-soc/20220430075915.5036-1-biju.das.jz@xxxxxxxxxxxxxx/T/#t
Biju Das (2):
dt-bindings: pwm: Add RZ/G2L GPT binding
pwm: Add support for RZ/G2L GPT
.../bindings/pwm/renesas,rzg2l-gpt.yaml | 378 ++++++++++++
drivers/pwm/Kconfig | 11 +
drivers/pwm/Makefile | 1 +
drivers/pwm/pwm-rzg2l-gpt.c | 570 ++++++++++++++++++
4 files changed, 960 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pwm/renesas,rzg2l-gpt.yaml
create mode 100644 drivers/pwm/pwm-rzg2l-gpt.c
--
2.25.1
