RE: [PATCH v8 3/5] Documentation: ABI: sysfs-bus-counter: add cascade_counts_enable and external_input_phase_clock_select

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi William Breathitt Gray,

Thanks for the feedback.

> Subject: Re: [PATCH v8 3/5] Documentation: ABI: sysfs-bus-counter: add
> cascade_counts_enable and external_input_phase_clock_select
> 
> On Sat, Dec 10, 2022 at 10:21:08AM +0000, Biju Das wrote:
> > +What:
> 	/sys/bus/counter/devices/counterX/external_input_phase_clock_select
> > +KernelVersion:	6.3
> > +Contact:	linux-iio@xxxxxxxxxxxxxxx
> > +Description:
> > +		This attribute selects the external clock pin for phase
> > +		counting mode of counter X.
> 
> Hi Biju,
> 
> Remove the "This attribute" from the description, and capitalize the word
> "counter": "Selects the external clock pin for phase counting mode of
> Counter X."
> 
> > +What:
> 	/sys/bus/counter/devices/counterX/external_input_phase_clock_select_
> available
> 
> At some point in the future I should combine the *_available blocks, but
> right now they're separated between Count and Signal configurations.
> This external_input_phase_clock_select_available is a device-level
> configuration so it'll need its own block as well, such as the following.

Since it is device-level configuration, I will move the below 3 blocks
to the top of file. I hope it is ok to you.

+What:          /sys/bus/counter/devices/counterX/cascade_counts_enable
+KernelVersion: 6.3
+Contact:       linux-iio@xxxxxxxxxxxxxxx
+Description:
+               Indicates the cascading of Counts on Counter X.
+
+               Valid attribute values are boolean.
+
+What:          /sys/bus/counter/devices/counterX/external_input_phase_clock_select
+KernelVersion: 6.3
+Contact:       linux-iio@xxxxxxxxxxxxxxx
+Description:
+               Selects the external clock pin for phase counting mode of
+               Counter X.
+
+               MTCLKA-MTCLKB:
+                       MTCLKA and MTCLKB pins are selected for the external
+                       phase clock.
+
+               MTCLKC-MTCLKD:
+                       MTCLKC and MTCLKD pins are selected for the external
+                       phase clock.
+
+What:          /sys/bus/counter/devices/counterX/external_input_phase_clock_select_available
+KernelVersion:  6.3
+Contact:        linux-iio@xxxxxxxxxxxxxxx
+Description:
+                Discrete set of available values for the respective device
+                configuration are listed in this file.

Cheers,
Biju




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux