Ocelot switches have the abilitiy to be used internally via
memory-mapped IO or externally via SPI or PCIe. This brings up issues
for documentation, where the same chip might be accessed internally in a
switchdev manner, or externally in a DSA configuration. This patch set
is perparation to bring DSA functionality to the VSC7512, utilizing as
much as possible with an almost identical VSC7514 chip.
This patch set changed quite a bit from v2, so I'll omit the background
of how those sets came to be. Rob offered a lot of very useful guidance.
My thanks.
At the end of the day, with this patch set, there should be a framework
to document Ocelot switches (and any switch) in scenarios where they can
be controlled internally (ethernet-switch) or externally (dsa-switch).
---
v4 -> v5
* Sync DSA maintainers with MAINTAINERS file (new patch 1)
* Undo move of port description of mediatek,mt7530.yaml (patch 4)
* Move removal of "^(ethernet-)?switch(@.*)?$" in dsa.yaml from patch 4
to patch 8
* Add more consistent capitalization in title lines and better Ethernet
switch port description. (patch 8)
v3 -> v4
* Renamed "base" to "ethernet-ports" to avoid confusion with the concept
of a base class.
* Squash ("dt-bindings: net: dsa: mediatek,mt7530: fix port description location")
patch into ("dt-bindings: net: dsa: utilize base definitions for standard dsa
switches")
* Corrections to fix confusion about additonalProperties vs unevaluatedProperties.
See specific patches for details.
v2 -> v3
* Restructured everything to use a "base" iref for devices that don't
have additional properties, and simply a "ref" for devices that do.
* New patches to fix up brcm,sf2, qca8k, and mt7530
* Fix unevaluatedProperties errors from previous sets (see specific
patches for more detail)
* Removed redundant "Device Tree Binding" from titles, where applicable.
v1 -> v2
* Two MFD patches were brought into the MFD tree, so are dropped
* Add first patch 1/6 to allow DSA devices to add ports and port
properties
* Test qca8k against new dt-bindings and fix warnings. (patch 2/6)
* Add tags (patch 3/6)
* Fix vsc7514 refs and properties
---
Colin Foster (10):
dt-bindings: dsa: sync with maintainers
dt-bindings: net: dsa: sf2: fix brcm,use-bcm-hdr documentation
dt-bindings: net: dsa: qca8k: remove address-cells and size-cells from
switch node
dt-bindings: net: dsa: utilize base definitions for standard dsa
switches
dt-bindings: net: dsa: allow additional ethernet-port properties
dt-bindings: net: dsa: qca8k: utilize shared dsa.yaml
dt-bindings: net: dsa: mediatek,mt7530: remove unnecessary dsa-port
reference
dt-bindings: net: add generic ethernet-switch
dt-bindings: net: add generic ethernet-switch-port binding
dt-bindings: net: mscc,vsc7514-switch: utilize generic
ethernet-switch.yaml
.../bindings/net/dsa/arrow,xrs700x.yaml | 2 +-
.../devicetree/bindings/net/dsa/brcm,b53.yaml | 2 +-
.../devicetree/bindings/net/dsa/brcm,sf2.yaml | 15 +++--
.../devicetree/bindings/net/dsa/dsa-port.yaml | 29 ++-------
.../devicetree/bindings/net/dsa/dsa.yaml | 49 +++++++--------
.../net/dsa/hirschmann,hellcreek.yaml | 2 +-
.../bindings/net/dsa/mediatek,mt7530.yaml | 6 +-
.../bindings/net/dsa/microchip,ksz.yaml | 2 +-
.../bindings/net/dsa/microchip,lan937x.yaml | 2 +-
.../bindings/net/dsa/mscc,ocelot.yaml | 2 +-
.../bindings/net/dsa/nxp,sja1105.yaml | 2 +-
.../devicetree/bindings/net/dsa/qca8k.yaml | 14 +----
.../devicetree/bindings/net/dsa/realtek.yaml | 2 +-
.../bindings/net/dsa/renesas,rzn1-a5psw.yaml | 2 +-
.../bindings/net/ethernet-switch-port.yaml | 25 ++++++++
.../bindings/net/ethernet-switch.yaml | 62 +++++++++++++++++++
.../bindings/net/mscc,vsc7514-switch.yaml | 31 +---------
MAINTAINERS | 2 +
18 files changed, 143 insertions(+), 108 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/ethernet-switch-port.yaml
create mode 100644 Documentation/devicetree/bindings/net/ethernet-switch.yaml
--
2.25.1
