Re: [PATCH] dt-bindings: can: renesas,rcar-canfd: Fix number of channels for R-Car V3U

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Dec 02, 2022 at 11:58:23AM +0100, Geert Uytterhoeven wrote:
> Hi Krzysztof,
> 
> On Fri, Dec 2, 2022 at 11:49 AM Krzysztof Kozlowski
> <krzysztof.kozlowski@xxxxxxxxxx> wrote:
> > On 02/12/2022 10:25, Geert Uytterhoeven wrote:
> > > On Fri, Dec 2, 2022 at 10:01 AM Krzysztof Kozlowski
> > > <krzysztof.kozlowski@xxxxxxxxxx> wrote:
> > >> On 02/12/2022 09:22, Geert Uytterhoeven wrote:
> > >>> According to the bindings, only two channels are supported.
> > >>> However, R-Car V3U supports eight, leading to "make dtbs" failures:
> > >>>
> > >>>         arch/arm64/boot/dts/renesas/r8a779a0-falcon.dtb: can@e6660000: Unevaluated properties are not allowed ('channel2', 'channel3', 'channel4', 'channel5', 'channel6', 'channel7' were unexpected)
> > >>>
> > >>> Update the number of channels to 8 on R-Car V3U.
> > >>> While at it, prevent adding more properties to the channel nodes, as
> > >>> they must contain no other properties than a status property.
> > >>>
> > >>> Fixes: d6254d52d70de530 ("dt-bindings: can: renesas,rcar-canfd: Document r8a779a0 support")
> > >>> Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
> > >
> > >>> --- a/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml
> > >>> +++ b/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml
> > >
> > >>>      description: Maximum frequency of the CANFD clock.
> > >>>
> > >>>  patternProperties:
> > >>> -  "^channel[01]$":
> > >>> +  "^channel[0-7]$":
> > >>>      type: object
> > >>>      description:
> > >>> -      The controller supports two channels and each is represented as a child
> > >>> -      node.  Each child node supports the "status" property only, which
> > >>> +      The controller supports multiple channels and each is represented as a
> > >>> +      child node.  Each child node supports the "status" property only, which
> > >>>        is used to enable/disable the respective channel.
> > >>>
> > >>> +    unevaluatedProperties: false
> > >>
> > >> There are no other properties within a channel, so this should be rather
> > >> additionalProperties: false.
> > >
> > > Are you sure? Then I also have to add:
> > >
> > >         properties:
> > >           status: true
> >
> > Do you? I think it would be first schema needing it, so maybe that would
> > be a problem for dtschema...
> 
> You think I haven't tried? ;-)
> 
>     arch/arm64/boot/dts/renesas/r8a774a1-beacon-rzg2m-kit.dtb:
> can@e66c0000: channel0: Additional properties are not allowed
> ('status' was unexpected)

I guess nodes with no properties aren't too common.

Now fixed in dtschema.

Rob



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux