Re: [PATCH v1 7/8] drm: rcar-du: dsi: Add r8A779g0 support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Quoting Tomi Valkeinen (2022-11-17 12:25:46)
> From: Tomi Valkeinen <tomi.valkeinen+renesas@xxxxxxxxxxxxxxxx>
> 
> Add DSI support for r8a779g0. The main differences to r8a779a0 are in
> the PLL and PHTW setups.
> 
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@xxxxxxxxxxxxxxxx>
> ---
>  drivers/gpu/drm/rcar-du/rcar_mipi_dsi.c      | 484 +++++++++++++++----
>  drivers/gpu/drm/rcar-du/rcar_mipi_dsi_regs.h |   6 +-
>  2 files changed, 384 insertions(+), 106 deletions(-)
> 
> diff --git a/drivers/gpu/drm/rcar-du/rcar_mipi_dsi.c b/drivers/gpu/drm/rcar-du/rcar_mipi_dsi.c
> index a7f2b7f66a17..723c35726c38 100644
> --- a/drivers/gpu/drm/rcar-du/rcar_mipi_dsi.c
> +++ b/drivers/gpu/drm/rcar-du/rcar_mipi_dsi.c
> @@ -9,6 +9,7 @@
>  #include <linux/delay.h>
>  #include <linux/io.h>
>  #include <linux/iopoll.h>
> +#include <linux/math64.h>
>  #include <linux/module.h>
>  #include <linux/of.h>
>  #include <linux/of_device.h>
> @@ -28,6 +29,20 @@
>  #include "rcar_mipi_dsi.h"
>  #include "rcar_mipi_dsi_regs.h"
>  
> +#define MHZ(v) ((v) * 1000000u)
> +
> +enum rcar_mipi_dsi_hw_model {
> +       RCAR_DSI_R8A779A0,
> +       RCAR_DSI_R8A779G0,
> +};
> +
> +struct rcar_mipi_dsi_device_info {
> +       enum rcar_mipi_dsi_hw_model model;
> +       const struct dsi_clk_config *clk_cfg;
> +       u8 clockset2_m_offset;
> +       u8 clockset2_n_offset;
> +};
> +
>  struct rcar_mipi_dsi {
>         struct device *dev;
>         const struct rcar_mipi_dsi_device_info *info;
> @@ -50,6 +65,17 @@ struct rcar_mipi_dsi {
>         unsigned int lanes;
>  };
>  
> +struct dsi_setup_info {
> +       unsigned long hsfreq;
> +       u16 hsfreqrange;
> +
> +       unsigned long fout;
> +       u16 m;
> +       u16 n;
> +       u16 vclk_divider;
> +       const struct dsi_clk_config *clkset;
> +};
> +
>  static inline struct rcar_mipi_dsi *
>  bridge_to_rcar_mipi_dsi(struct drm_bridge *bridge)
>  {
> @@ -62,22 +88,6 @@ host_to_rcar_mipi_dsi(struct mipi_dsi_host *host)
>         return container_of(host, struct rcar_mipi_dsi, host);
>  }
>  
> -static const u32 phtw[] = {
> -       0x01020114, 0x01600115, /* General testing */
> -       0x01030116, 0x0102011d, /* General testing */
> -       0x011101a4, 0x018601a4, /* 1Gbps testing */
> -       0x014201a0, 0x010001a3, /* 1Gbps testing */
> -       0x0101011f,             /* 1Gbps testing */
> -};
> -
> -static const u32 phtw2[] = {
> -       0x010c0130, 0x010c0140, /* General testing */
> -       0x010c0150, 0x010c0180, /* General testing */
> -       0x010c0190,
> -       0x010a0160, 0x010a0170,
> -       0x01800164, 0x01800174, /* 1Gbps testing */
> -};
> -
>  static const u32 hsfreqrange_table[][2] = {
>         { 80000000U,   0x00 }, { 90000000U,   0x10 }, { 100000000U,  0x20 },
>         { 110000000U,  0x30 }, { 120000000U,  0x01 }, { 130000000U,  0x11 },
> @@ -103,24 +113,53 @@ static const u32 hsfreqrange_table[][2] = {
>         { /* sentinel */ },
>  };
>  
> -struct vco_cntrl_value {
> +struct dsi_clk_config {
>         u32 min_freq;
>         u32 max_freq;
> -       u16 value;
> +       u8 vco_cntrl;
> +       u8 cpbias_cntrl;
> +       u8 gmp_cntrl;
> +       u8 int_cntrl;
> +       u8 prop_cntrl;
>  };
>  
> -static const struct vco_cntrl_value vco_cntrl_table[] = {
> -       { .min_freq = 40000000U,   .max_freq = 55000000U,   .value = 0x3f },
> -       { .min_freq = 52500000U,   .max_freq = 80000000U,   .value = 0x39 },
> -       { .min_freq = 80000000U,   .max_freq = 110000000U,  .value = 0x2f },
> -       { .min_freq = 105000000U,  .max_freq = 160000000U,  .value = 0x29 },
> -       { .min_freq = 160000000U,  .max_freq = 220000000U,  .value = 0x1f },
> -       { .min_freq = 210000000U,  .max_freq = 320000000U,  .value = 0x19 },
> -       { .min_freq = 320000000U,  .max_freq = 440000000U,  .value = 0x0f },
> -       { .min_freq = 420000000U,  .max_freq = 660000000U,  .value = 0x09 },
> -       { .min_freq = 630000000U,  .max_freq = 1149000000U, .value = 0x03 },
> -       { .min_freq = 1100000000U, .max_freq = 1152000000U, .value = 0x01 },
> -       { .min_freq = 1150000000U, .max_freq = 1250000000U, .value = 0x01 },
> +static const struct dsi_clk_config dsi_clk_cfg_r8a779a0[] = {
> +       {   40000000u,   55000000u, 0x3f, 0x10, 0x01, 0x00, 0x0b },
> +       {   52500000u,   80000000u, 0x39, 0x10, 0x01, 0x00, 0x0b },
> +       {   80000000u,  110000000u, 0x2f, 0x10, 0x01, 0x00, 0x0b },
> +       {  105000000u,  160000000u, 0x29, 0x10, 0x01, 0x00, 0x0b },
> +       {  160000000u,  220000000u, 0x1f, 0x10, 0x01, 0x00, 0x0b },
> +       {  210000000u,  320000000u, 0x19, 0x10, 0x01, 0x00, 0x0b },
> +       {  320000000u,  440000000u, 0x0f, 0x10, 0x01, 0x00, 0x0b },
> +       {  420000000u,  660000000u, 0x09, 0x10, 0x01, 0x00, 0x0b },
> +       {  630000000u, 1149000000u, 0x03, 0x10, 0x01, 0x00, 0x0b },
> +       { 1100000000u, 1152000000u, 0x01, 0x10, 0x01, 0x00, 0x0b },
> +       { 1150000000u, 1250000000u, 0x01, 0x10, 0x01, 0x00, 0x0c },

Sigh ... is it this one 0x0c value that means we need to keep all these
entries repeated ? :-S

If it weren't for that, it seems we could keep just two sets of
> +       u8 cpbias_cntrl;
> +       u8 gmp_cntrl;
> +       u8 int_cntrl;
> +       u8 prop_cntrl;

One for each of the 9a0, and the 9g0...

But this is fine, and I guess the implication is there may be other
future differences to come in other platforms.

It could be refactored then when we have more visibility.


> +       { /* sentinel */ },
> +};
> +
> +static const struct dsi_clk_config dsi_clk_cfg_r8a779g0[] = {
> +       {   40000000u,   45310000u, 0x2b, 0x00, 0x00, 0x08, 0x0a },
> +       {   45310000u,   54660000u, 0x28, 0x00, 0x00, 0x08, 0x0a },
> +       {   54660000u,   62500000u, 0x28, 0x00, 0x00, 0x08, 0x0a },
> +       {   62500000u,   75000000u, 0x27, 0x00, 0x00, 0x08, 0x0a },
> +       {   75000000u,   90630000u, 0x23, 0x00, 0x00, 0x08, 0x0a },
> +       {   90630000u,  109370000u, 0x20, 0x00, 0x00, 0x08, 0x0a },
> +       {  109370000u,  125000000u, 0x20, 0x00, 0x00, 0x08, 0x0a },
> +       {  125000000u,  150000000u, 0x1f, 0x00, 0x00, 0x08, 0x0a },
> +       {  150000000u,  181250000u, 0x1b, 0x00, 0x00, 0x08, 0x0a },
> +       {  181250000u,  218750000u, 0x18, 0x00, 0x00, 0x08, 0x0a },
> +       {  218750000u,  250000000u, 0x18, 0x00, 0x00, 0x08, 0x0a },
> +       {  250000000u,  300000000u, 0x17, 0x00, 0x00, 0x08, 0x0a },
> +       {  300000000u,  362500000u, 0x13, 0x00, 0x00, 0x08, 0x0a },
> +       {  362500000u,  455480000u, 0x10, 0x00, 0x00, 0x08, 0x0a },
> +       {  455480000u,  500000000u, 0x10, 0x00, 0x00, 0x08, 0x0a },
> +       {  500000000u,  600000000u, 0x0f, 0x00, 0x00, 0x08, 0x0a },
> +       {  600000000u,  725000000u, 0x0b, 0x00, 0x00, 0x08, 0x0a },
> +       {  725000000u,  875000000u, 0x08, 0x00, 0x00, 0x08, 0x0a },
> +       {  875000000u, 1000000000u, 0x08, 0x00, 0x00, 0x08, 0x0a },
> +       { 1000000000u, 1200000000u, 0x07, 0x00, 0x00, 0x08, 0x0a },
> +       { 1200000000u, 1250000000u, 0x03, 0x00, 0x00, 0x08, 0x0a },
>         { /* sentinel */ },
>  };
>  
> @@ -144,7 +183,7 @@ static void rcar_mipi_dsi_set(struct rcar_mipi_dsi *dsi, u32 reg, u32 set)
>         rcar_mipi_dsi_write(dsi, reg, rcar_mipi_dsi_read(dsi, reg) | set);
>  }
>  
> -static int rcar_mipi_dsi_phtw_test(struct rcar_mipi_dsi *dsi, u32 phtw)
> +static int rcar_mipi_dsi_write_phtw(struct rcar_mipi_dsi *dsi, u32 phtw)
>  {
>         u32 status;
>         int ret;
> @@ -163,32 +202,231 @@ static int rcar_mipi_dsi_phtw_test(struct rcar_mipi_dsi *dsi, u32 phtw)
>         return ret;
>  }
>  
> +static int rcar_mipi_dsi_write_phtw_arr(struct rcar_mipi_dsi *dsi,
> +                                       const u32 *phtw, unsigned int size)
> +{
> +       for (unsigned int i = 0; i < size; i++) {
> +               int ret = rcar_mipi_dsi_write_phtw(dsi, phtw[i]);
> +
> +               if (ret < 0)
> +                       return ret;
> +       }
> +
> +       return 0;
> +}
> +
> +#define WRITE_PHTW(...)                                               \
> +       ({                                                            \
> +               static const u32 phtw[] = { __VA_ARGS__ };            \
> +               int ret;                                              \
> +               ret = rcar_mipi_dsi_write_phtw_arr(dsi, phtw,         \
> +                                                  ARRAY_SIZE(phtw)); \
> +               ret;                                                  \
> +       })
> +
> +static int rcar_mipi_dsi_init_phtw_v3u(struct rcar_mipi_dsi *dsi)
> +{
> +       return WRITE_PHTW(0x01020114, 0x01600115, 0x01030116, 0x0102011d,
> +                         0x011101a4, 0x018601a4, 0x014201a0, 0x010001a3,
> +                         0x0101011f);
> +}
> +
> +static int rcar_mipi_dsi_post_init_phtw_v3u(struct rcar_mipi_dsi *dsi)
> +{
> +       return WRITE_PHTW(0x010c0130, 0x010c0140, 0x010c0150, 0x010c0180,
> +                         0x010c0190, 0x010a0160, 0x010a0170, 0x01800164,
> +                         0x01800174);
> +}
> +
> +static int rcar_mipi_dsi_init_phtw_v4h(struct rcar_mipi_dsi *dsi,
> +                                      const struct dsi_setup_info *setup_info)
> +{
> +       int ret;
> +
> +       if (setup_info->hsfreq < MHZ(450)) {
> +               ret = WRITE_PHTW(0x01010100, 0x011b01ac);
> +               if (ret)
> +                       return ret;
> +       }
> +
> +       ret = WRITE_PHTW(0x01010100, 0x01030173, 0x01000174, 0x01500175,
> +                        0x01030176, 0x01040166, 0x010201ad);

Ok - I can see this at 67.3.5.

> +       if (ret)
> +               return ret;
> +
> +       if (setup_info->hsfreq <= MHZ(1000))
> +               ret = WRITE_PHTW(0x01020100, 0x01910170, 0x01020171,
> +                                0x01110172);

The <=1Gbps reads:

<=1Gbps

Set PHTW=H’01020100
Set PHTW=H’01010172
Set PHTW=H’01570170
Set PHTW=H’01060171
Set PHTW=H’01110172

Is it clear why theres a difference here?

> +       else if (setup_info->hsfreq <= MHZ(1500))
> +               ret = WRITE_PHTW(0x01020100, 0x01980170, 0x01030171,
> +                                0x01100172);

And here, it states the following which differs:

1Gbps < and <=1.5Gbps
Set PHTW=H’01020100
Set PHTW=H’01000172
Set PHTW=H’01200170
Set PHTW=H’01090171
Set PHTW=H’01100172 ?

> +       else if (setup_info->hsfreq <= MHZ(2500))
> +               ret = WRITE_PHTW(0x01020100, 0x0144016b, 0x01000172);

And I believe this is Case 2 on the right...

Set PHTW=H’01020100
Set PHTW=H’0104016B
Set PHTW=H’01000172

Which has differences in the middle write ?

I expect I'm missing something obvious there as there are lots of key
differences. So perhaps those are just 'examples'.

> +       else
> +               return -EINVAL;
> +
> +       if (ret)
> +               return ret;
> +
> +       if (dsi->lanes <= 1) {
> +               ret = WRITE_PHTW(0x01070100, 0x010e010b);
> +               if (ret)
> +                       return ret;
> +       }
> +
> +       if (dsi->lanes <= 2) {
> +               ret = WRITE_PHTW(0x01090100, 0x010e010b);
> +               if (ret)
> +                       return ret;
> +       }
> +
> +       if (dsi->lanes <= 3) {
> +               ret = WRITE_PHTW(0x010b0100, 0x010e010b);
> +               if (ret)
> +                       return ret;
> +       }
> +
> +       if (setup_info->hsfreq <= MHZ(1500)) {
> +               ret = WRITE_PHTW(0x01010100, 0x01c0016e);
> +               if (ret)
> +                       return ret;
> +       }
> +
> +       return 0;
> +}
> +
> +static int
> +rcar_mipi_dsi_post_init_phtw_v4h(struct rcar_mipi_dsi *dsi,
> +                                const struct dsi_setup_info *setup_info)
> +{
> +       u32 status;
> +       int ret;
> +
> +       if (setup_info->hsfreq <= MHZ(1500)) {
> +               WRITE_PHTW(0x01020100, 0x00000180);
> +
> +               ret = read_poll_timeout(rcar_mipi_dsi_read, status,
> +                                       status & PHTR_TEST, 2000, 10000, false,
> +                                       dsi, PHTR);
> +               if (ret < 0) {
> +                       dev_err(dsi->dev, "failed to test PHTR\n");
> +                       return ret;
> +               }
> +
> +               WRITE_PHTW(0x01010100, 0x0100016e);
> +       }
> +
> +       return 0;
> +}
> +
>  /* -----------------------------------------------------------------------------
>   * Hardware Setup
>   */
>  
> -struct dsi_setup_info {
> -       unsigned long fout;
> -       u16 vco_cntrl;
> -       u16 prop_cntrl;
> -       u16 hsfreqrange;
> -       u16 div;
> -       unsigned int m;
> -       unsigned int n;
> -};
> +static void rcar_mipi_dsi_pll_calc_r8a779a0(struct rcar_mipi_dsi *dsi,
> +                                           struct clk *clk,
> +                                           unsigned long fout_target,
> +                                           struct dsi_setup_info *setup_info)
> +{
> +       unsigned int best_err = -1;
> +       unsigned long fin;
> +
> +       fin = clk_get_rate(clk);
> +
> +       for (unsigned int n = 3; n <= 8; n++) {
> +               unsigned long fpfd;
> +
> +               fpfd = fin / n;
> +
> +               if (fpfd < MHZ(2) || fpfd > MHZ(8))
> +                       continue;
> +
> +               for (unsigned int m = 64; m <= 625; m++) {
> +                       unsigned int err;
> +                       u64 fout;
> +
> +                       fout = (u64)fpfd * m;
> +
> +                       if (fout < MHZ(320) || fout > MHZ(1250))
> +                               continue;
> +
> +                       fout = div64_u64(fout, setup_info->vclk_divider);
> +
> +                       if (fout < setup_info->clkset->min_freq ||
> +                           fout > setup_info->clkset->max_freq)
> +                               continue;
> +
> +                       err = abs((long)(fout - fout_target) * 10000 /
> +                                 (long)fout_target);
> +
> +                       if (err < best_err) {
> +                               setup_info->m = m;
> +                               setup_info->n = n;
> +                               setup_info->fout = (unsigned long)fout;
> +                               best_err = err;
> +
> +                               if (err == 0)
> +                                       return;
> +                       }
> +               }
> +       }
> +}
> +
> +static void rcar_mipi_dsi_pll_calc_r8a779g0(struct rcar_mipi_dsi *dsi,
> +                                           struct clk *clk,
> +                                           unsigned long fout_target,
> +                                           struct dsi_setup_info *setup_info)
> +{
> +       unsigned int best_err = -1;
> +       unsigned long fin;
> +
> +       fin = clk_get_rate(clk);
> +
> +       for (unsigned int n = 1; n <= 8; n++) {
> +               unsigned long fpfd;
> +
> +               fpfd = fin / n;
> +
> +               if (fpfd < MHZ(8) || fpfd > MHZ(24))
> +                       continue;
> +
> +               for (unsigned int m = 167; m <= 1000; m++) {
> +                       unsigned int err;
> +                       u64 fout;
> +
> +                       fout = div64_u64((u64)fpfd * m, 2);
> +
> +                       if (fout < MHZ(2000) || fout > MHZ(4000))
> +                               continue;
> +
> +                       fout = div64_u64(fout, setup_info->vclk_divider);
> +
> +                       if (fout < setup_info->clkset->min_freq ||
> +                           fout > setup_info->clkset->max_freq)
> +                               continue;
> +
> +                       err = abs((long)(fout - fout_target) * 10000 /
> +                                 (long)fout_target);
> +                       if (err < best_err) {
> +                               setup_info->m = m;
> +                               setup_info->n = n;
> +                               setup_info->fout = (unsigned long)fout;
> +                               best_err = err;
> +
> +                               if (err == 0)
> +                                       return;
> +                       }
> +               }
> +       }
> +}
>  
>  static void rcar_mipi_dsi_parameters_calc(struct rcar_mipi_dsi *dsi,
>                                           struct clk *clk, unsigned long target,
>                                           struct dsi_setup_info *setup_info)
>  {
>  
> -       const struct vco_cntrl_value *vco_cntrl;
> +       const struct dsi_clk_config *clkset;
>         unsigned long fout_target;
> -       unsigned long fin, fout;
> -       unsigned long hsfreq;
> -       unsigned int best_err = -1;
> -       unsigned int divider;
> -       unsigned int n;
>         unsigned int i;
>         unsigned int err;
>  
> @@ -198,70 +436,53 @@ static void rcar_mipi_dsi_parameters_calc(struct rcar_mipi_dsi *dsi,
>          */
>         fout_target = target * mipi_dsi_pixel_format_to_bpp(dsi->format)
>                     / (2 * dsi->lanes);
> -       if (fout_target < 40000000 || fout_target > 1250000000)
> +       if (fout_target < MHZ(40) || fout_target > MHZ(1250))
>                 return;
>  
>         /* Find vco_cntrl */
> -       for (vco_cntrl = vco_cntrl_table; vco_cntrl->min_freq != 0; vco_cntrl++) {
> -               if (fout_target > vco_cntrl->min_freq &&
> -                   fout_target <= vco_cntrl->max_freq) {
> -                       setup_info->vco_cntrl = vco_cntrl->value;
> -                       if (fout_target >= 1150000000)
> -                               setup_info->prop_cntrl = 0x0c;
> -                       else
> -                               setup_info->prop_cntrl = 0x0b;
> +       for (clkset = dsi->info->clk_cfg; clkset->min_freq != 0; clkset++) {
> +               if (fout_target > clkset->min_freq &&
> +                   fout_target <= clkset->max_freq) {
> +                       setup_info->clkset = clkset;
>                         break;
>                 }
>         }
>  
> -       /* Add divider */
> -       setup_info->div = (setup_info->vco_cntrl & 0x30) >> 4;
> +       switch (dsi->info->model) {
> +       case RCAR_DSI_R8A779A0:
> +               setup_info->vclk_divider = 1 << ((clkset->vco_cntrl >> 4) & 0x3);
> +               rcar_mipi_dsi_pll_calc_r8a779a0(dsi, clk, fout_target, setup_info);
> +               break;
> +
> +       case RCAR_DSI_R8A779G0:
> +               setup_info->vclk_divider = 1 << (((clkset->vco_cntrl >> 3) & 0x7) + 1);
> +               rcar_mipi_dsi_pll_calc_r8a779g0(dsi, clk, fout_target, setup_info);
> +               break;
> +
> +       default:
> +               return;
> +       }
>  
>         /* Find hsfreqrange */
> -       hsfreq = fout_target * 2;
> +       setup_info->hsfreq = setup_info->fout * 2;
>         for (i = 0; i < ARRAY_SIZE(hsfreqrange_table); i++) {
> -               if (hsfreqrange_table[i][0] >= hsfreq) {
> +               if (hsfreqrange_table[i][0] >= setup_info->hsfreq) {
>                         setup_info->hsfreqrange = hsfreqrange_table[i][1];
>                         break;
>                 }
>         }
>  
> -       /*
> -        * Calculate n and m for PLL clock
> -        * Following the HW manual the ranges of n and m are
> -        * n = [3-8] and m = [64-625]
> -        */
> -       fin = clk_get_rate(clk);
> -       divider = 1 << setup_info->div;
> -       for (n = 3; n < 9; n++) {
> -               unsigned long fpfd;
> -               unsigned int m;
> -
> -               fpfd = fin / n;
> -
> -               for (m = 64; m < 626; m++) {
> -                       fout = fpfd * m / divider;
> -                       err = abs((long)(fout - fout_target) * 10000 /
> -                                 (long)fout_target);
> -                       if (err < best_err) {
> -                               setup_info->m = m - 2;
> -                               setup_info->n = n - 1;
> -                               setup_info->fout = fout;
> -                               best_err = err;
> -                               if (err == 0)
> -                                       goto done;
> -                       }
> -               }
> -       }
> +       err = abs((long)(setup_info->fout - fout_target) * 10000 / (long)fout_target);
>  
> -done:
>         dev_dbg(dsi->dev,
> -               "%pC %lu Hz -> Fout %lu Hz (target %lu Hz, error %d.%02u%%), PLL M/N/DIV %u/%u/%u\n",
> -               clk, fin, setup_info->fout, fout_target, best_err / 100,
> -               best_err % 100, setup_info->m, setup_info->n, setup_info->div);
> +               "Fout = %u * %lu / (2 * %u * %u) = %lu (target %lu Hz, error %d.%02u%%)\n",
> +               setup_info->m, clk_get_rate(clk), setup_info->n, setup_info->vclk_divider,
> +               setup_info->fout, fout_target,
> +               err / 100, err % 100);
> +
>         dev_dbg(dsi->dev,
>                 "vco_cntrl = 0x%x\tprop_cntrl = 0x%x\thsfreqrange = 0x%x\n",
> -               setup_info->vco_cntrl, setup_info->prop_cntrl,
> +               clkset->vco_cntrl, clkset->prop_cntrl,
>                 setup_info->hsfreqrange);
>  }
>  
> @@ -324,7 +545,7 @@ static int rcar_mipi_dsi_startup(struct rcar_mipi_dsi *dsi,
>  {
>         struct dsi_setup_info setup_info = {};
>         unsigned int timeout;
> -       int ret, i;
> +       int ret;
>         int dsi_format;
>         u32 phy_setup;
>         u32 clockset2, clockset3;
> @@ -360,10 +581,21 @@ static int rcar_mipi_dsi_startup(struct rcar_mipi_dsi *dsi,
>         phy_setup |= PHYSETUP_HSFREQRANGE(setup_info.hsfreqrange);
>         rcar_mipi_dsi_write(dsi, PHYSETUP, phy_setup);
>  
> -       for (i = 0; i < ARRAY_SIZE(phtw); i++) {
> -               ret = rcar_mipi_dsi_phtw_test(dsi, phtw[i]);
> +       switch (dsi->info->model) {
> +       case RCAR_DSI_R8A779A0:
> +               ret = rcar_mipi_dsi_init_phtw_v3u(dsi);
> +               if (ret < 0)
> +                       return ret;
> +               break;
> +
> +       case RCAR_DSI_R8A779G0:
> +               ret = rcar_mipi_dsi_init_phtw_v4h(dsi, &setup_info);
>                 if (ret < 0)
>                         return ret;
> +               break;
> +
> +       default:
> +               return -ENODEV;
>         }
>  
>         /* PLL Clock Setting */
> @@ -371,12 +603,13 @@ static int rcar_mipi_dsi_startup(struct rcar_mipi_dsi *dsi,
>         rcar_mipi_dsi_set(dsi, CLOCKSET1, CLOCKSET1_SHADOW_CLEAR);
>         rcar_mipi_dsi_clr(dsi, CLOCKSET1, CLOCKSET1_SHADOW_CLEAR);
>  
> -       clockset2 = CLOCKSET2_M(setup_info.m) | CLOCKSET2_N(setup_info.n)
> -                 | CLOCKSET2_VCO_CNTRL(setup_info.vco_cntrl);
> -       clockset3 = CLOCKSET3_PROP_CNTRL(setup_info.prop_cntrl)
> -                 | CLOCKSET3_INT_CNTRL(0)
> -                 | CLOCKSET3_CPBIAS_CNTRL(0x10)
> -                 | CLOCKSET3_GMP_CNTRL(1);
> +       clockset2 = CLOCKSET2_M(setup_info.m - dsi->info->clockset2_m_offset)
> +                 | CLOCKSET2_N(setup_info.n - dsi->info->clockset2_n_offset)
> +                 | CLOCKSET2_VCO_CNTRL(setup_info.clkset->vco_cntrl);
> +       clockset3 = CLOCKSET3_PROP_CNTRL(setup_info.clkset->prop_cntrl)
> +                 | CLOCKSET3_INT_CNTRL(setup_info.clkset->int_cntrl)
> +                 | CLOCKSET3_CPBIAS_CNTRL(setup_info.clkset->cpbias_cntrl)
> +                 | CLOCKSET3_GMP_CNTRL(setup_info.clkset->gmp_cntrl);
>         rcar_mipi_dsi_write(dsi, CLOCKSET2, clockset2);
>         rcar_mipi_dsi_write(dsi, CLOCKSET3, clockset3);
>  
> @@ -407,10 +640,21 @@ static int rcar_mipi_dsi_startup(struct rcar_mipi_dsi *dsi,
>                 return -ETIMEDOUT;
>         }
>  
> -       for (i = 0; i < ARRAY_SIZE(phtw2); i++) {
> -               ret = rcar_mipi_dsi_phtw_test(dsi, phtw2[i]);
> +       switch (dsi->info->model) {
> +       case RCAR_DSI_R8A779A0:
> +               ret = rcar_mipi_dsi_post_init_phtw_v3u(dsi);
>                 if (ret < 0)
>                         return ret;
> +               break;
> +
> +       case RCAR_DSI_R8A779G0:
> +               ret = rcar_mipi_dsi_post_init_phtw_v4h(dsi, &setup_info);
> +               if (ret < 0)
> +                       return ret;
> +               break;
> +
> +       default:
> +               return -ENODEV;
>         }
>  
>         /* Enable DOT clock */
> @@ -427,8 +671,21 @@ static int rcar_mipi_dsi_startup(struct rcar_mipi_dsi *dsi,
>                 dev_warn(dsi->dev, "unsupported format");
>                 return -EINVAL;
>         }
> -       vclkset |= VCLKSET_COLOR_RGB | VCLKSET_DIV(setup_info.div)
> -               |  VCLKSET_LANE(dsi->lanes - 1);
> +
> +       vclkset |= VCLKSET_COLOR_RGB | VCLKSET_LANE(dsi->lanes - 1);
> +
> +       switch (dsi->info->model) {
> +       case RCAR_DSI_R8A779A0:
> +               vclkset |= VCLKSET_DIV_R8A779A0(__ffs(setup_info.vclk_divider));
> +               break;
> +
> +       case RCAR_DSI_R8A779G0:
> +               vclkset |= VCLKSET_DIV_R8A779G0(__ffs(setup_info.vclk_divider) - 1);

Why is this a -1 here ? Seems an odd difference compared to the A0.

> +               break;
> +
> +       default:
> +               return -ENODEV;
> +       }
>  
>         rcar_mipi_dsi_write(dsi, VCLKSET, vclkset);
>  
> @@ -841,8 +1098,25 @@ static int rcar_mipi_dsi_remove(struct platform_device *pdev)
>         return 0;
>  }
>  
> +static const struct rcar_mipi_dsi_device_info r8a779a0_data = {
> +       .model = RCAR_DSI_R8A779A0,
> +       .clk_cfg = dsi_clk_cfg_r8a779a0,
> +       .clockset2_m_offset = 2,
> +       .clockset2_n_offset = 1,
> +
> +};
> +
> +static const struct rcar_mipi_dsi_device_info r8a779g0_data = {
> +       .model = RCAR_DSI_R8A779G0,
> +       .clk_cfg = dsi_clk_cfg_r8a779g0,
> +       .clockset2_m_offset = 0,
> +       .clockset2_n_offset = 1,
> +
> +};
> +
>  static const struct of_device_id rcar_mipi_dsi_of_table[] = {
> -       { .compatible = "renesas,r8a779a0-dsi-csi2-tx" },
> +       { .compatible = "renesas,r8a779a0-dsi-csi2-tx", .data = &r8a779a0_data },
> +       { .compatible = "renesas,r8a779g0-dsi-csi2-tx", .data = &r8a779g0_data },
>         { }
>  };
>  
> diff --git a/drivers/gpu/drm/rcar-du/rcar_mipi_dsi_regs.h b/drivers/gpu/drm/rcar-du/rcar_mipi_dsi_regs.h
> index 2eaca54636f3..608851340acf 100644
> --- a/drivers/gpu/drm/rcar-du/rcar_mipi_dsi_regs.h
> +++ b/drivers/gpu/drm/rcar-du/rcar_mipi_dsi_regs.h
> @@ -122,7 +122,8 @@
>  #define VCLKSET_CKEN                   (1 << 16)
>  #define VCLKSET_COLOR_RGB              (0 << 8)
>  #define VCLKSET_COLOR_YCC              (1 << 8)
> -#define VCLKSET_DIV(x)                 (((x) & 0x3) << 4)
> +#define VCLKSET_DIV_R8A779A0(x)                (((x) & 0x3) << 4)
> +#define VCLKSET_DIV_R8A779G0(x)                (((x) & 0x7) << 4)
>  #define VCLKSET_BPP_16                 (0 << 2)
>  #define VCLKSET_BPP_18                 (1 << 2)
>  #define VCLKSET_BPP_18L                        (2 << 2)
> @@ -166,6 +167,9 @@
>  #define PHTW_CWEN                      (1 << 8)
>  #define PHTW_TESTDIN_CODE(x)           (((x) & 0xff) << 0)
>  
> +#define PHTR                           0x1038
> +#define PHTR_TEST                      (1 << 16)
> +
>  #define PHTC                           0x103c
>  #define PHTC_TESTCLR                   (1 << 0)
>  
> -- 
> 2.34.1
>




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux